S80 06

2006

VOLVO

OWNERS MANUAL S80

TP 7809 (English). AT 0520. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2005

WEB EDITION

Contents

An alphabetical index is at the back of the book.

The specifications, design features and illustrations in this Owner’s

Manual are not binding. We reserve the right to make modifications

without prior notice.

Safety 9

Instruments, switches, controls 31

Climate control 53

Interior 65

Locks, alarm 77

Starting and driving 87

Wheels and tyres 117

Fuses, bulb replacement 125

Car care and Service 137

Specifications 155

Audio 167

Telephone 187

Index 201

In addition to describing the standard equipment this manual also

covers optional and extra equipment. In addition there are also

equipment alternatives, manual or automatic transmission for

example. In certain countries statutory requirements affect the level

of equipment. This means that it is occasionally necessary to page

past sections of the book which describe equipment not installed

on your car.

8501984d

Dashboard - left-hand drive

Tachometer .............................. 32

Automatic gearbox ................. 32

Clock ...................................... 32

Outside temperature sensor .... 32

Fuel gauge .............................. 32

Temperature gauge .................. 32

Speedometer ........................... 32

Odometer ................................ 32

Trip odometer ......................... 32

Warning symbols .................... 33

Display ................................... 37

Main/Dipped beam .................. 42

Position/Parking lamps............ 42

Fog lamps ................................ 42

Instrument lighting .................. 42

Beam length control ................. 42

Hazard warning flashers ..... 46

Electronic climate control ECC ........................... 56

Manual climate control A/C ................................ 60

Seat heating ......................................................... 46

Defroster - rear window, door mirrors ............... 46

Radio ..... 167

Steering wheel adjustment .... 43

Airbag ................................... 12

Cruise control ....................... 41

Radio keypad ........................ 173

Windscreen washers/wipers .. 44

Direction indicator lever ....... 43

Trip computer ....................... 40

Dashboard - right-hand drive

8502061d

Radio ..... 167

Main/Dipped beam .................. 42

Position/Parking lamps ............ 42

Fog lamps ................................ 42

Instrument lighting .................. 42

Beam length control ................. 42

Electronic climate control ECC ........................... 56

Manual climate control A/C ................................ 60

Seat heating ......................................................... 46

Defroster - rear window, door mirrors ............... 46

Steering wheel adjustment .... 43

Airbag ................................... 12

Cruise control ....................... 41

Radio keypad ........................ 173

Windscreen washers/wipers .. 44

Direction indicator lever ....... 43

Trip computer ....................... 40

Automatic gearbox ................. 32

Clock ...................................... 32

Outside temperature sensor .... 32

Fuel gauge .............................. 32

Temperature gauge .................. 32

Speedometer ........................... 32

Odometer ................................ 32

Tripodometer .......................... 32

Warning symbols .................... 33

Display ................................... 37

Tachometer .............................. 32

Hazard warning

flashers ....................... 46

8502000d

Interior - left-hand drive

Doors and Locks ..................... 78

Alarm ....................................... 83

Power windows ...................... 48

Power mirror controls ............. 49

Manual gearbox .................... 91

Automatic gearbox ............... 92

Geartronic ............................. 93

Handbrake ............................ 47

Switches in centre console ... 38

Manual adjustment of front seats ............ 66

Electrical adjustment of front seats .......... 68

Seat heating .............................................. 46

Cleaning the upholstery ........................... 141

Tipping backrests forward ....... 74

Hatch for long loads ................. 74

Tilting head restraints forward ... 39

Adjusting head restraints .......... 67

Child locks ................................ 82

Integrated booster cushion

for children ............................... 28

Glovebox ................ 70

8502062d

Interior - right hand drive

Glovebox ................ 70

Manual gearbox .................... 91

Automatic gearbox ............... 92

Geartronic ............................. 93

Handbrake ............................ 47

Switches in centre console ... 38

Tipping backrests forward ....... 74

Hatch for long loads ................. 74

Tilting head restraints forward ... 39

Adjusting head restraints .......... 67

Child locks ................................ 82

Integrated booster cushion

for children ............................... 28

Manual adjustment of front seats ............ 66

Electrical adjustment of front seats .......... 68

Seat heating .............................................. 46

Cleaning the upholstery ........................... 141

Doors and Locks ..................... 78

Alarm ....................................... 83

Power windows ...................... 48

Power mirror controls ............. 49

8000233d

Exterior

Tyres ........................ 118

Wheels ..................... 118

Brakes ...................... 110

Spare wheel ............. 121

Changing wheels ..... 122

Fuel filler flap ........................... 88

Refuelling ................................. 88

Economical driving ...................89

Boot lid ........................................................ 80

Replacing reversing lamp bulb ................... 133

Replacing brake lamp bulb .......................... 133

Replacing tail lamp bulb .............................. 133

Replacing direction indicator lamp bulb ...... 133

Replacing fog lamp bulb ............................. 133

Replacing number plate lighting .................. 135

Replacing main beam bulb ......... 132

Replacing dipped beam bulb ...... 132

Replacing position lamp bulb ..... 132

Replacing direction

indicator lamp bulb ..................... 133

Replacing fog lamp bulb ............ 134

Sunroof ........................ 50

Cleaning the car body .............. 140

Rustproofing............................ 138

Touching up paintwork ............ 139

Volvo Car Corporation and the environment

Volvo Car Corporation's

environmental philosophy

Environmental care, safety and quality are the

three core values of the Volvo Car Corporation.

They influence all operations. We also believe

that our customers share our consideration for

the environment.

Your Volvo complies with strict international

environmental standards and is also manufac-

tured in one of the cleanest and most resource-

efficient plants in the world. Volvo Car

Corporation has global certification to the ISO

14001 environmental standard. This leads to

continuous improvements within the area of the

environment.

EPI (Environmental Product Information)

environmental product declarations are supplied

for all Volvo models. You can now compare the

environmental impact of different models and

engines. Read more at www.volvocars.com/epi

Fuel consumption

Volvo cars have competitive fuel consumption

in each of their respective classes. The lower

the fuel consumption the lower the emission of

the greenhouse gas, carbon dioxide.

Efficient emission control

Your Volvo is manufactured following the

concept - Clean inside and out - a concept that

encompasses a clean interior environment as

well as highly efficient emission control. Your

car saves fuel and releases minimal quantities of

harmful substances.

Applied to the radiator is the PremAir®

- a

catalytic coating which converts up to 75 % of

hazardous ground-level ozone into pure

oxygen.

Air cleaning in the passenger

compartment

A sophisticated air cleaning system, IAQS

(Interior Air Quality System)

, option, ensures

that the air in the passenger compartment is

cleaner than the air outside.

The system consists of an electronic sensor and

a carbon filter. The air intake is closed if the

level of carbon monoxide in the passenger

compartment becomes too high - for example in

heavy town traffic, queues and tunnels. The

entry of nitrous oxides, ground-level ozone and

hydrocarbons is prevented by the carbon filter.

Option.

1 PremAir® is a registered trademark of

Engelhard Corporation

Volvo Car Corporation and the environment

000032

Ecological standard for textiles

Textiles and leather inside the car fulfil the

requirements in accordance with the internatio-

nal ecological standard, Öko-Tex 100

Volvo workshops and the

environment

Regular maintenance carried out by an authori-

sed Volvo workshop creates the conditions for

low fuel consumption and contributes to a

cleaner environment.

Volvo service technicians are equipped with the

knowhow and tools to ensure that your car

delivers the best possible environmental

performance.

Reducing environmental impact

You can help reduce environmental impact, for

example, by purchasing eco-labelled car care

products and by servicing and maintaining the

car according to the instructions in the owner’s

manual.

The following hints will help you to do your bit

for the environment:

· Ensure that your tyre pressures are correct.

Poorly inflated tyres increase fuel con-

sumption.

· Since a roof rack and ski box increase air

resistance, leading to signi-

ficantly higher fuel con-

sumption, they should be

removed immediately after

use.

· Remove unnecessary items from the car -

the greater the load the higher the fuel con-

sumption.

· Is your car equipped with an engine block

heater? If so, use it for a few hours before

starting from cold to reduce fuel consump-

tion and exhaust emissions.

· Drive gently. Avoid unnecessary rapid ac-

celeration and heavy braking.

· Drive in the highest gear pos-

sible. Low engine speeds result

in lower fuel consumption.

· Ease back on the accelerator on

downhill gradients.

· Use engine braking. Take your foot off the

accelerator and change down.

· Avoid idling. Switch off the engine in traffic

queues.

· Always dispose of environmentally hazar-

dous waste, such as batte-

ries and oils, in an environ-

mentally safe manner. If

uncertain, consult your

Volvo workshop for advice.

· Service your car regularly.

Does not apply to the S80 Executive

These hints will help you to reduce your fuel

consumption without increasing your travel

time or lessening the enjoyment of driving.

Apart from being kind to your car, you'll be

saving money - and the Earth's resources.

Safety

Seatbelts 10

Airbag (SRS) 12

Activating/deactivating the airbag (SRS) 16

Side airbags 18

Inflatable Curtain (IC) 20

WHIPS (Whiplash Protection System) 21

When are the safety systems activated? 23

Inspecting the airbags and inflatable curtains 24

Child safety 25

Tensioning the hip strap. The belt must be

positioned low down

Seatbelts

WARNING!

• The seatbelts and airbags interact. If a

seatbelt is not used or is used incorrectly,

this may diminish the protection provided

by the airbag in the event of a collision.

• Each belt is intended for one person only.

• Never modify or repair the seatbelts

yourself. Contact an authorised Volvo

workshop.

• If the belt has been subjected to a major

load, such as in a collision, the entire belt

must be replaced. Some of the protective

characteristics of the belt may have been

lost, even if it appears to be undamaged.

Replace the seatbelt if the belt is worn or

damaged. The new seatbelt must be type-

approved and intended for installation in

the same position as the replaced belt.

Always use a seatbelt

Heavy braking can have serious consequences

if the seatbelts are not used. Ensure that all

passengers use their seatbelts. Otherwise, rear

seat passengers may be thrown forward against

the backs of the front seats in a collision.

Putting on a seatbelt:

• Pull the belt out slowly and secure it by

pressing the buckle into the lock. A loud

”click” indicates that the belt has locked.

Releasing the belt:

• Press the red lock button and let the belt

retract. If the belt does not retract fully, feed

the belt in by hand so that it does not hang

loose.

The belt locks and cannot be withdrawn:

• if it is pulled out too quickly

• during braking and acceleration

• if the car leans heavily.

It is important that the belt lies against the body

so it can provide maximum protection. Do not

lean the backrest too far back. The seatbelt is

designed to protect in a normal seating position.

Keep the following in mind:

• do not use clips or anything else that can

prevent the belt from fitting properly

• ensure the belt is not twisted or caught on

anything

• the hip strap must be positioned low down

(not over the abdomen)

• tension the hip strap over the lap by pulling

the diagonal shoulder belt as illustrated.

Label on seatbelts with seatbelt tensioner

Seatbelt tensioner

All the seatbelts are equipped with belt

tensioners. A mechanism in the belt tensioner

tightens the belt around the body in the event of

a sufficiently violent collision. This provides

more effective restraint for passengers.

8801947d

IMPORTEDBYVOLVONORTH

AMERICACORP.ROCKLEIGHNJ.

BELTNO.XXXXXX

VOLVOGOTHENBURG

MADEINSWEDEN

Ar4mp

DOT

040413

1695

DATEOFMANUFACTURE

YEAR

WEEK

DAY

Ar4mp

8505253a

Seatbelts

Seatbelt reminder

The seatbelt warning symbol in the combined

instrument panel and above the rearview mirror

comes on until the driver and front seat

passenger buckle their seatbelts. The seatbelt

reminder switches off after 6 seconds if speed

is below 10 km/h. If the driver or front seat

passenger have not buckled their seatbelts, the

reminder switches on again when the speed

exceeds 10 km/h and switches off if the speed

drops below 5 km/h. If the belt is released, the

function reactivates when the speed exceeds

10 km/h.

The seatbelt reminder is intended for an adult

sitting in the front seat. If a belt-fitted child seat

is fitted in the front seat, the seatbelt reminder

does not switch on.

Seatbelts and pregnancy

The seatbelt should always be worn during

pregnancy. But it is crucial that it be worn in the

correct way. The diagonal section should wrap

over the shoulder then be routed between the

breasts and to the side of the belly. The lap

section should lay flat over the thighs and as

low as possible under the belly. It must never

be allowed to ride upward. Remove all slack

from the belt and insure that it fits close to the

body without any twists.

As a pregnancy progresses, pregnant drivers

should adjust their seats and steering wheel

such that they can easily maintain control of the

vehicle as they drive (which means they must

be able to easily operate the foot pedals and

steering wheel). Within this context, they

should strive to position the seat with as large a

distance as possible between their belly and the

steering wheel.

8803443a

8802849r

Airbag (SRS)

3800639d

Warning symbol in combined

instrument panel

The Airbag system

is monitored continuously

by the control module and there is a warning

lamp in the combined instrument panel. This

lamp comes on when the ignition key is turned

to position I, II or III. The symbol goes out

after about 7 seconds if the Airbag system

working correctly.

As well as the warning symbol, a

message appears in the information

display. If the warning symbol

malfunctions, the warning triangle

comes on and the message SRS

AIRBAG SERVICE URGENT

appears in the display. Contact an

authorised Volvo workshop

immediately.

WARNING!

If the warning symbol for the Airbag

system remains on or comes on while

driving, it means that the Airbag system is

not functioning fully. The symbol can

indicate a fault in the seatbelt buckle, SIPS,

SRS or IC system. Contact an authorised

Volvo workshop immediately.

1. Includes SRS and seatbelt tensioner, SIPS and IC.

Airbag (SRS)

8801907e

Airbag (SRS) on the driver’s

side

The car has an SRS airbag (Supplemental

Restraint System) in the steering wheel to

supplement the protection afforded by the

seatbelt. This airbag is fitted folded up into the

centre of the steering wheel. The steering wheel

is marked SRS AIRBAG.

Passenger airbag (SRS)

The passenger airbag

is fitted folded up behind

a panel above the glovebox. This panel is

marked SRS AIRBAG.

1. Not all cars have a passenger airbag (SRS). This can be

unselected when the car is ordered.

WARNING!

Never place a child in a child seat or on a

booster cushion in the front seat if the airbag

(SRS) is activated

Never allow a child to stand or sit in front of

the front passenger seat. No one shorter than

140 cm (4 ft 7) should sit in the front

passenger seat if the airbag (SRS) is

activated.

Failure to follow the advice given above can

endanger the life of the child.

8801889e

WARNING!

The seatbelts and airbags interact. If a

seatbelt is not used or is used incorrectly,

this may diminish the protection provided by

the airbag in the event of a collision.

WARNING!

To minimise the risk of injury if the airbag

deploys, passengers must sit as upright as

possible with their feet on the floor and

backs against the backrest. Seatbelts must be

secured.

2. For information on activated/deactivated airbag (SRS)

see page 16.

Airbag (SRS)

8803417d

8803418d

SRS system

The SRS system consists of a gas generator

surrounded by an inflatable airbag. A sufficient-

ly violent collision trips sensors and ignites the

gas generator, inflating the airbag with hot gas.

To cushion the impact, the airbag deflates when

compressed. When this occurs, smoke escapes

into the car. This is completely normal. The

entire process, including inflation and deflation

of the airbag, occurs within tenths of a second.

NOTE!

• The sensors react differently depending on

the course of the collision and whether the

seatbelts on the driver and passenger side

are used. It is therefore possible that only

one (or none) of the airbags may inflate in a

collision. The SRS system senses the force

of the collision on the car and adapts

accordingly so that one or more airbags is

deployed.

• The airbags have a function whereby their

capacities are adapted to the collision force

to which the vehicle is subjected.

WARNING!

Repairs must only be performed by an

authorised Volvo workshop.

Work on the SRS system can cause

malfunction and result in serious personal

injury.

SRS system, left-hand drive

SRS system, right-hand drive

Airbag (SRS)

8802092M

8802099m

Location of the passenger airbag in left-hand

drive and right-hand drive cars

WARNING!

Never interfere with SRS components in the

steering wheel or the panel above the

glovebox.

Objects and accessories must not be

positioned or glued on or near the SRS

Airbag panel (above the glovebox) or in the

area affected by a deployed airbag.

Activating/deactivating the airbag (SRS)

Indicator showing that the passenger airbag

(SRS) is deactivated

PACOS (Passenger Airbag Cut-Off Switch)

PACOS (option)

The airbag (SRS) for the front passenger seat

can be deactivated. This is necessary if a child

seat is to be placed there.

Indicator

A text message in the rearview mirror indicates

that the passenger airbag (SRS) is deactivated.

Activating/deactivating

The switch is located on the passenger end of

the dashboard and is accessible when the

passenger door is open. Check that the switch

is in the required position. Volvo recommends

that that the ignition key is used to change

position. (Other items with a shape similar to a

key can be used).

WARNING!

• Activated airbag (passenger seat):

Never place a child in a child seat or on a

booster cushion in the front passenger seat

when the airbag is activated. This also

applies to anyone shorter than 140 cm

(4 ft 7).

• Deactivated airbag (passenger seat):

No one taller than 140 cm (4 ft 7) should

sit in the front passenger seat when the

airbag is deactivated.

Failure to follow the advice given above can

endanger life.

8803406m

8803403

WARNING!

If the car is equipped with a front passenger

airbag (SRS), but does not have PACOS, the

airbag will always be activated.

Activating/deactivating the airbag (SRS)

Switch position

ON = Airbag (SRS) activated. With the switch

in this position, persons taller than 140 cm

(4 ft 7) can sit in the front passenger seat, but

never children in a child seat or on a booster

cushion.

OFF = Airbag (SRS) is deactivated. With the

switch in this position, children in a child seat

or on a booster cushion can sit in the front

passenger seat, but never persons taller than

140 cm (4 ft 7).

8803404

8803405m

WARNING!

Do not allow anyone to sit in the front

passenger seat if the text message in the roof

panel indicates that the airbag (SRS) is

deactivated and the airbag warning symbol is

displayed in the combined instrument panel.

This indicates that there has been a severe

malfunction. Contact an authorised Volvo

workshop as soon as possible.

Side airbags

Side airbags - SIPS bags

A large proportion of the collision force is

transferred by the SIPS (Side Impact Protection

System) to the floor, roof, beams, pillars, and

other structural parts of the body. The side

airbags on the driver’s and front passenger seats

protect the chest area and are an important part

of the SIPS. The SIPS bag system consists of

two main parts, the side airbags and the

sensors. The side airbags are located in the front

seat backrests.

Side airbag locations

Inflated side airbag

WARNING!

Side airbags are a supplement to the SIPS

system. Always wear a seatbelt.

WARNING!

Do not put objects in the area between the

outside of the seat and the door panel, since

this area is required by the side airbag.

1. For information on activated/deactivated airbag (SRS)

see page 16.

8803041a

IMG-2011

WARNING!

Repairs must only be performed by an

authorised Volvo workshop.

Work on the SIPS system can cause

malfunction and result in serious personal

injury.

Child seats and side airbags

The side airbag does not diminish the protection

provided by the car to children seated in a child

seat or on a booster cushion.

A child seat or booster cushion can be placed

on the front passenger seat provided that the car

does not have an activated

passenger airbag.

WARNING!

Use only Volvo genuine car seat covers, or

seat covers approved by Volvo. Other seat

covers may impede the operation of the side

air bags.

Side airbags

Right-hand drive

8803412j

8803413j

Left-hand drive

SIPS bag system

The SIPS bag system consists of a gas

generator, side airbag and sensors. A sufficient-

ly violent collision trips the sensors and ignites

the gas generator, inflating the side airbag. The

airbag inflates between the occupant and the

door panel and thereby cushions the initial

impact while deflating. The side airbag is only

normally deployed on the side of the collision.

Inflatable Curtain (IC)

8801966e

8801999d

Properties

The inflatable curtain, IC (Inflatable Curtain), is

a supplement to the SIPS system. It is concea-

led in the headlining along both sides of the

roof and protects both front and rear seat

passengers. The inflatable curtain is activated by

the SIPS collision sensors if the car is hit from

the side. When deployed, the inflatable curtain

inflates. The inflatable curtain helps to prevent

the driver and passengers from striking their

heads on the inside of the car during a collision.

WARNING!

The inflatable curtain is a supplement to the

seatbelts. Always wear a seatbelt.

WARNING!

• Never hang or fasten anything on the roof

handles. The hook is only intended for light

outer garments (not for hard objects such

as umbrellas).

• Do not screw or fit anything to the

headlining, door pillars or side panels. This

could compromise the intended protection.

Only use Volvo genuine parts that are

approved for fitting in these areas.

• Do not load the car higher than 50 mm

under the top edge of the rear passenger

windows to avoid affecting the protection

of the inflatable curtain in the event of a

side collision.

WHIPS (Whiplash Protection System)

Protection against whiplash

injury - WHIPS

The whiplash protection system (WHIPS)

consists of energy absorbing backrests and

specially designed head restraints for the front

seats. The system is actuated by a rear-end

collision, where the angle and speed of the

collision, and the nature of the colliding vehicle

all have an influence.

WHIPS system and child seats/

booster cushions

The WHIPS system does not diminish the

protection provided by the car to children seated

in a child seat or on a booster cushion.

Correct seating position

For the best possible protection, the driver and

front seat passenger should sit in the centre of

the seat with as little space as possible between

the head and the head restraint.

Properties of the seat

When the WHIPS system is deployed, the

front seat backrests fall backward to alter the

position of the driver and front seat passenger.

This diminishes the risk of whiplash injury.

8504618a

WARNING!

The inflatable curtain is a supplement to the

seatbelts. Always wear a seatbelt.

WARNING!

Never modify or repair the seat or WHIPS

system yourself. Contact an authorised Volvo

workshop.

WHIPS (Whiplash Protection System)

Do not obstruct the WHIPS

system

WARNING!

If a rear seat backrest is folded down, the

corresponding front seat must be moved

forward so that it does not touch the folded

backrest.

WARNING!

• If a seat has been subjected to extreme

forces, such as due to a rear-end collision,

the WHIPS system must be checked by an

authorised Volvo workshop.

• Part of the WHIPS system’s protective

capacity may have been lost even if the

seats appear to be undamaged. Contact an

authorised Volvo workshop to have the

system checked even after a minor rear-end

collision.

8504619a

IMG-2041

WARNING!

Do not squeeze rigid objects between the rear

seat cushion and the front seat backrest.

Make sure you do not to obstruct the

function of the WHIPS system.

When are the safety systems activated?

System Triggered

Seatbelt tensioner In the event of a head-on collision and/or overturning.

Airbags SRS In the event of a head-on collision

Side airbags In the event of a side impact

Inflatable Curtain IC In the event of a side impact or if the car overturns

WHIPS In a rear-end collision

1. The bodywork of the car could be greatly deformed in a

collision without airbag deployment. A number of factors

such as the rigidity and weight of the object hit, the speed

of the car, the angle of the collision etc. affects how the

different safety systems of the car are activated.

If the airbags have been deployed, the follo-

wing is recommended:

• Have the car transported to an authorised

Volvo workshop. Do not drive with

deployed airbags.

• Have an authorised Volvo workshop replace

components in the car’s safety systems.

• Always contact a doctor.

NOTE! The SRS, SIPS, IC and belt tensioner

systems are deployed only once during a

collision.

WARNING!

The Airbag control unit is located in the

centre console. If the centre console is

drenched with water or other liquid,

disconnect the battery cables. Do not attempt

to start the car since the airbags may deploy.

Have the car transported to an authorised

Volvo workshop.

WARNING!

Never drive with deployed airbags. They can

make steering difficult. Other safety systems

may also be damaged. The smoke and dust

created when the airbags are deployed can

cause skin and eye irritation after intensive

exposure. In case of irritation, wash with

cold water. The rapid deployment sequence

and airbag fabric may cause friction injury

and burns to the skin.

Inspection intervals

The decal on the door pillar(s) shows the dates

(year, month) when you should contact an

authorised Volvo workshop to inspect and, if

necessary, replace the airbags, belt tensioners

and inflatable curtains. If you have questions

concerning the systems, contact an authorised

Volvo workshop.

1. Driver airbag

2. Front passenger airbag

3. Side airbag on the driver’s side

4. Side airbag on the passenger side

5. Inflatable curtain on the driver’s side

6. Inflatable curtain on the passenger side

Inspecting the airbags and inflatable curtains

This decal is located in the rear left door

opening

Children should sit

comfortably and safely

The position of a child in the car and the choice

of equipment is dictated by the child’s height

and weight, for more information see page 27.

Children who are shorter than 150 cm (4 ft 11)

must be carried in adequate child protection.

NOTE! Regulations regarding the placement of

children in cars vary from country to country.

Check what laws apply.

Children of all ages and sizes must always sit

correctly secured in the car. Never allow a child

to sit on the knee of a passenger.

Child safety

Volvo’s own child safety equipment is designed

for your car. Use Volvo genuine equipment to

best ensure that the mounting points and

attachments are correctly positioned and are

sufficiently strong.

You may place:

• a child seat or booster cushion on the front

passenger seat, provided the passenger

airbag is not activated

• a rear-facing child seat in the rear seat that

uses the back of the front seat as support.

1. For information on activated/deactivated airbag (SRS)

see page 16.

Child seats and airbags are not compatible

8503861

8803040a

WARNING!

Persons shorter than 140 cm (4 ft 7) may

only sit in the front passenger seat if the

passenger airbag is deactivated.

Child seats and airbags (SRS)

Always place a child in the rear seat if the

passenger airbag (SRS) is activated

. A child in

a child seat on the front passenger seat may

suffer serious injury if the airbag deploys.

Child safety

Decals on the end of the dashboard

WARNING!

Never place a child in a child seat or on a

booster cushion in the front seat if the airbag

(SRS) is activated

. Failure to follow this

advice could endanger the life of the child.

1. For information on activated/deactivated airbag (SRS)

see page 16.

Decal located on the car’s end cover

WARNING!

Never place a child in a child seat or on a

booster cushion in the front seat if the airbag

(SRS) is activated.

No one shorter than 140 cm (4 ft 7) should

sit in the front passenger seat if the airbag

(SRS) is activated.

Failure to follow the advice given above can

endanger the life of the child.

8903808a

8904049b

Decal located on the car’s end cover

(Australia only)

L: Suitable for certain child seats in accordance with the list. Child seats

can be vehicle-specific, limited, semi-universal or universal.

B: Integrated and approved for this age group.

NOTE! For information on activated/deactivated airbag (SRS), see

page 16.

Weight / Age Front seat Centre rear seatOuter rear seats

<10 kg

(0-9 months)

9-18 kg

(9-36 months)

15-36 kg

(3-12 years)

1. Rear-facing child seat, secured with

seatbelt.

L: Type approval no. E5 03160

2. Rear-facing child seat, secured with

ISOFIX mounting.

L: Type approval no. E5 03162

3. Rear-facing child seat, secured with

seatbelt and straps.

L: Type approval no. E5 03135

1. Rear-facing child seat, secured with

seatbelt and support legs.

L: Type approval no. E5 03160

2. Rear-facing child seat, secured with

ISOFIX mounting and support legs.

L: Type approval no. E5 03162

3. Rear-facing child seat, secured with

seatbelt, support legs and straps.

L: Type approval no. E5 03135

1. Rear-facing child seat, secured with

seatbelt.

L: Type approval no. E5 03161

2. Rear-facing child seat, secured with

ISOFIX mounting.

L: Type approval no. E5 03163

3. Rear-facing child seat, secured with

seatbelt and straps.

L: Type approval no. E5 03135

1. Rear-facing child seat, secured with

seatbelt and support legs.

L: Type approval no. E5 03161

2. Rear-facing child seat, secured with

ISOFIX mounting and support legs.

L: Type approval no. E5 03163

3. Rear-facing child seat, secured with

seatbelt, support legs and straps.

L: Type approval no. E5 03135

1. Rear-facing child seat, secured with

seatbelt, support legs and straps.

L: Type approval no. E5 03135

1. Rear-facing child seat, secured with

seatbelt, support legs and straps.

L: Type approval no. E5 03135

1. Booster cushion with or without

backrest.

L: Type approval no. E5 03139.

1. Booster cushion with or without backrest.

L: Type approval no. E5 03139

2. Integrated booster cushion.

B: Type approval no. E5 03140

1. Booster cushion with or without

backrest.

L: Type approval no. E5 03139

Child safety

WARNING!

Never place a child in a child seat or on a booster cushion in the front

seat if the airbag (SRS) is activated.

No one shorter than 140 cm (4 ft 7) should sit in the front passenger seat

if the airbag (SRS) is activated.

Failure to follow the advice given above can endanger the life of the

child.

Child safety

8503861

Integrated booster cushion (option)

Volvo’s integrated booster cushion for the

centre seat is specially designed to provide

optimum safety for children.

When used with the regular seatbelt, the booster

cushion is approved for children weighing

between 15 and 36 kg.

Folding out the booster cushion:

• Fold down the booster cushion.

• Pull apart the Velcro.

• Raise the upper section back into place.

Check that:

- the seatbelt is in contact with the child’s

body and is not slack or twisted.

- the belt lies correctly over the shoulder.

- the lap belt is low over the pelvis for

optimum protection.

- the belt does not touch the child’s throat or

lie below the shoulder.

• Carefully adjust the position of the head

restraint to suit the child.

Folding in the booster cushion:

• Fold down the upper section (A).

• Fasten the Velcro (B).

• Raise the booster cushion into the rear seat

backrest (C).

NOTE! Make sure that both sections of the

booster cushion are secured with the Velcro

strap (B) before folding in. Otherwise the upper

section (A) can become trapped in the rear seat

backrest (C) when the booster cushion is folded

out again.

WARNING!

• Repair or replacement should only be

performed by an authorised Volvo work-

shop. Do not make any modifications or

additions to the booster cushion.

• If an integrated booster cushion has been

subjected to a major load, such as in

conjunction with a collision, the entire

booster cushion must be replaced. Even if

the booster cushion appears to be undama-

ged, it may not afford the same level of

protection. The booster cushion must also

be replaced if it is heavily worn.

Folding out the booster cushion Folding in the booster cushion

GIF

8503859d

8503860d

Child safety

Fitting a child seat

Volvo has child safety products that are

designed for and tested by Volvo.

When using other products that are available on

the market, it is important to read the fitting

instructions included with the product.

• Do not attach the straps for the child seat to

the horizontal adjustment bar, springs, rails

or beams under the seat. Sharp edges can

damage the straps.

• Allow the back of the child seat to rest

against the dashboard. This applies to cars

without a passenger airbag, or where the

airbag is deactivated.

1. For information on activated/deactivated airbag (SRS)

see page 16.

ISOFIX fixture system for child

seats (option)

The outer rear seats have ISOFIX attachment

points for child seats. Contact a Volvo dealer for

further information on child safety equipment.

IMG-201180

WARNING!

Never place the child seat in the front seat if

the car is equipped with an activated

front

passenger airbag. If problems arise when

fitting child safety products, contact the

manufacturer for clearer instructions.

Combined instrument panel 32

Indicator and warning symbols 33

Messages in the display 37

Switches in the centre console 38

Trip computer 40

Cruise control 41

Lighting panel 42

Left-hand stalk switch, Steering wheel adjustment 43

Right-hand stalk switch 44

Ignition switch and steering wheel lock 45

Hazard warning flashers, Rear defroster, Heated seats 46

Parking brake, Electrical socket 47

Power windows 48

Rearview mirror/door mirrors 49

Power sunroof 50

Sun screen, Sun blinds 51

Laminated side windows (option), Water-repellent coating (option) 52

Instruments, switches and controls

Combined instrument panel

1. Temperature gauge

Displays the engine cooling system temperatu-

re. If the temperature is abnormally high and the

needle enters the red field a message is shown

in the display. Remember that extra lamps in

front of the radiator grille reduce the cooling

capacity with high outside temperatures and

high engine loads.

2. Display

The display shows information and warning

messages.

3. Speedometer

Shows the speed of the car.

4. Tripodometer, T1 and T2

The tripodometer is used for measuring shorter

distances. The right hand digit gives 100 meter

units. Depress the button for more than

2 seconds to reset. Change between the trip

odometers using one short press on the button.

5. Cruise control indicator

See page 41.

6. Odometer

The odometer indicates the total mileage of

the car.

7. Main beam on/off

8. Warning symbol

If a fault should occur, the symbol lights and a

message is shown in the display.

9. Tachometer

Gives engine speed in thousands of revolutions

per minute (RPM). The needle on the tachome-

ter must not enter the red field.

10. Automatic gearbox indicator

The selected gearshift programme is displayed

here. If you have Geartronic automatic trans-

mission and drive in manual mode, the current

manual gear is displayed.

11. Outside temperature gauge

Displays the outside temperature. When the

temperature lies between +2 °C and -5 °C, a

snowflake symbol is shown in the display. The

symbol warns of slippery road conditions.

When the car is or was stationary, the outside

temperature gauge may rend a higher reading

than is actual.

12. Clock

Turn the button to set the time.

13. Fuel gauge

When the lamp in the instrument panel lights,

approximately 8 litres of usable fuel remain in

the tank.

14. Indicator and warning symbols

15. Direction indicators - left /right

3800838m

Indicator and warning symbols

Warning symbol in centre

of dashboard

This symbol shines as an red or yellow light

depending on the severity of the fault discov-

ered. See next page for more information!

Red symbol

Stop the car. Read the message in the display.

Symbol and message text are shown until the

error is rectified.

Yellow symbol

Read the message in the display. Rectify.

The message text is cleared using the READ

button, see page 37, or it disappears after

2 minutes.

NOTE!

When the message text "TIME FOR

REGULAR SERVICE" is shown, the sym-

bol lamp and message text are cleared using

the READ button, or they disappear after

2 minutes.

The indicator and warning symbols light when

the ignition key is turned to driving position

(position II) before starting. This shows that the

symbols are functioning. When the engine is

started all the symbols go out.

If the engine is not started within 5 seconds all

the symbols go out except

and .

Certain symbols may not have the function

indicated, depending on car equipment. The

symbol for the parking brake goes out when the

parking brake is released.

3800839m

WARNING!

If both the BRAKE and ABS warning

symbols are lit up there is a risk that the rear

end will have a tendency to slide during

heavy braking.

If BRAKE and ABS warning

symbols light up at the same

time, there may be a problem

in the brake force distribution.

· Stop the car in a safe place and switch off

the engine.

· Start the car again.

· If both warning symbols go out the fault

was temporary and it is not necessary to

visit a workshop.

· If the warning symbols remain lit, check the

brake fluid reservoir level first.

· If the reservoir level is below MIN the car

should not be driven further. Have it towed

to an authorised Volvo workshop to check

the brake system.

· If the brake fluid level is normal and the

lamps remain lit, carefully drive the car to

the nearest authorised Volvo workshop to

have the brake system checked.

Warning - fault in brake system

If the BRAKE symbol lights up the

brake fluid level may be too low.

· Stop the car in a safe place and check the

brake fluid reservoir level.

· If the reservoir level is below MIN the car

should not be driven further. Have it towed

to an authorised Volvo workshop to check

the brake system.

Warning - fault in ABS system

If the ABS warning symbol lights up

the ABS system is not functioning.

The car’s normal braking system continues to

function normally but without the ABS

function.

· Stop the car in a safe place and switch off

the engine.

· Start the engine again.

· If the warning symbol goes out, the fault

was temporary and it is not necessary to

visit a workshop.

· If the warning symbol remains lit, drive

carefully to an authorised workshop to

check the ABS system.

Indicator and warning symbols

Fault in the STC or DSTC system

If the symbol comes on and the additional text

"ANTI-SKID SERVICE REQUIRED" and

you have not deactivated any of the system, this

indicates a fault in a part of the system.

· Stop the car in a safe place and switch off the

engine. Start the car again.

· If the warning symbol goes out this was just

a temporary indication fault and you do not

need to visit a workshop.

· If the warning symbol remains on, drive to

an authorised Volvo workshop to check

the system.

The indicator and warning symbols light when the ignition key is

turned to driving position (position II) before starting. This shows

that the symbols are functioning. When the engine is started all the

symbols go out. If the engine is not started within 5 seconds all the

symbols go out except

and . Certain symbols may not

have the function indicated, depending on car equipment. The

symbol for the parking brake goes out when the parking brake is

released.

3800839m

WARNING!

Under normal driving conditions, the

STC/DSTC system improves the car’s road

safety, but this should not be taken as a reason

to increase speed. Always follow the usual

precautions for safe cornering and driving on

slippery surfaces.

* The STC and DSTC system is an option on

some markets

Stability system STC* and

DSTC*

The STC/DSTC system comprises several

different functions that are described in detail

on page 112.

The symbol lights and goes out

again after approx. two seconds

The symbol lights for a system check when the

car is started.

The symbol flashes

The SC function acts to prevent the car’s drive

wheels from spinning. The TC function acts to

improve the car’s traction.

The AYC function acts to prevent skidding.

The warning symbol shines with a

steady amber glow

TRACTION CONTROL TEMPORARILY

OFF is shown on the information display

together with the symbol.

The TC function has been temporarily reduced

due to high brake temperature.

The function is automatically reactivated when

brake temperature returns to normal.

The warning symbol shines with a

steady amber glow

ANTI-SKID SERVICE REQUIRED is shown

on the information display together with the

symbol.

The STC or DSTC system has been deactivated

due to a fault.

· Stop the car in a safe place and switch off

the engine.

· Restart the engine.

If the warning symbol remains lit, drive to an

authorised Volvo workshop to have the system

checked.

The indicator and warning symbols light when the ignition key is

turned to driving position (position II) before starting. This shows

that the symbols are functioning. When the engine is started all the

symbols go out. If the engine is not started within 5 seconds all the

symbols go out except

and . Certain symbols may not

have the function indicated, depending on car equipment. The

symbol for the parking brake goes out when the parking brake is

released.

Fault in SRS

If the symbol remains lit or lights

while driving a fault has been found in

the SRS system. Drive to a Volvo workshop to

have it checked.

Fault in car emissions systems

Drive to a Volvo workshop to have it

checked.

Rear fog lamp

The lamp lights up when the rear fog

lamp is on.

Trailer indicator lamp

Flashes when the car and trailer

direction indicators are in use.

If the lamp does not flash, one of the direction

indicators on the trailer or car is defective.

Low oil pressure

If the lamp lights while driving,

engine oil pressure is too low. Stop

the engine immediately and check the engine oil

level.

Parking brake applied

Remember that the light only

indicates that the parking brake is

applied, not how hard. Check by pulling the

lever! You must always pull it hard enough

for the brake to fasten in a “notch”.

Generator not charging

If the lamp lights while driving,

there is probably a fault in the

electrical system. Contact a Volvo workshop.

Indicator and warning symbols

Seat belt reminder

The lamp shines until the driver connects

his/her safety belt.

Engine pre-heater (diesel)

The lamp lights to inform that the engine

is pre-heating. When the lamp goes out,

the car may be started. Only applies to diesel-

powered cars.

Messages in the display

3800648d

Messages in the display

Whenever a warning or indicator symbol lights up, a message is displayed. When you have

read and understood, press the READ button (A). Read messages are then erased from the

display and are put into the memory. The message remains in the memory until the fault is

remedied.

Very serious fault messages cannot be erased from the display. They remain in the

display until the fault is remedied.

NOTE! If a warning message interrupts when you, for example, are in the trip computer

menu or wish to use the telephone, you must first acknowledge the message by pressing the

READ button (A).

Messages stored in the memory can be read again. Press the READ button (A) if you wish

to see the stored message. You can scroll through the messages in the memory by pressing

the READ button (A). Press the READ button (A) to return read messages to the memory.

Message Significance/Action

STOP SAFELY Stop and switch off the engine. Serious risk of damage.

STOP ENGINE Stop and switch off the engine. Serious risk of damage.

SERVICE URGENT Take your car in for service immediately.

SEE MANUAL Consult your owner’s manual.

SERVICE REQUIRED Take your car in for service as soon as possible.

FIX NEXT SERVICE Have your car checked at the next service interval.

TIME FOR REGULAR SERVICE When this message is shown, the car is due for a service. When the message is displayed is affected by the

distance travelled, number of months since last service and engine running time.

OIL LEVEL LOW - FILL OIL* Low engine oil level. Check and remedy as soon as possible. See page 149 for more information.

OIL LEVEL LOW - STOP SAFELY* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 149.

OIL LEVEL LOW - STOP ENGINE* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 149.

OIL LEVEL LOW - SEE MANUAL* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 149.

Shown together with an amber warning triangle.

Shown together with a red warning triangle.

* Only applies to engine variants with oil level sensor.

3603559d

Switches in the centre console

Active chassis,

FOUR-C (option)

Press the button to shift

between Comfort and Sport

mode. See also page 95.

* Option on some markets

NOTE! The order of the buttons may vary.

3603554m

3603549m

3603546m

WARNING!

Remember the driving characteristics of the

car change if you deactivate the STC/DSTC

system.

The STC/DSTC

system*

This button is used to reduce

or reactivate the functions in

the STC/DSTC system.

When the LED in the button

comes on, the STC/DSTC

system is activated (if no fault

arises).

NOTE! Hold the button

depressed for at least half a

second to reduce the function of the STC/

DSTC system. The LED in the button goes out

and the text ”STC SPIN CONTROL OFF” or

”DSTC SPIN CONTROL OFF” is shown in

the display.

Reduce the system if you must use a wheel of a

different dimension than the other wheels.

The STC/DSTC system is reactivated when the

engine is started.

3603680m

BLIS - Blind Spot

Information System

(option)

Press the button to deactivate

or reactivate the function.

See page 113 for further

information.

Lowering outer

rear seat head

restraints (option)

- Turn the ignition key to

position I or II.

- Press the button to lower the rear head

restraints to improve visibility.

Do not lower the head restraints if either of the

outer seats is occupied.

The head restraints must be restored to an

upright position manually.

The head restraints must be in an upright

position for the rear seat backrests to be

lowered.

Retractable door

mirrors (option)

This button is used to retract

the door mirrors if they are

folded out, or to fold them out

if they are retracted.

Do as follows if a door mirror has been

accidentally folded in or out:

- Manually fold the door mirror forward as

far as possible.

- Turn the ignition key to position II.

- Fold the door mirror inward and then outward

using the button. The door mirrors have now

returned to their original fixed positions.

Auxiliary lamps

(accessory)

Use this button if the auxiliary

lamps of the car are to light

together with the main beam or

if you wish to deactivate this function. The LED

in the button is lit when the function is active.

Electric socket/

Cigarette lighter

(option)

The electric socket can be

used for various 12V

accessories, such as mobile phones or coolers.

The cigarette lighter is activated by pushing in

the button. Once the lighter is heated, the button

will pop out. Pull out the lighter to use it. For

reasons of safety, always keep the lighter in the

socket when it is not in use. The maximum

current is 10A.

NOTE! The relative positions of the buttons

can vary.

3603547m

3603550m

3603552m

3603551m

Parking assistance

(option)

The system is always

activated when the car is

started. Press the button to

deactivate/reactivate parking

assistance. See also page 96.

Locking the

boot lid

(certain countries)

Press this button in order to

lock the boot lid. The boot lid

remains locked even if the doors are unlocked

manually with the master key, the master key

remote control or the service key.

Deactivating the

deadlock function

and detectors

Use this button if you wish to

switch off the deadlock

function (doors cannot be opened from the

inside when locked). This button can also be

used when deactivating the alarm system

movement and tilt detectors

. The LED lights

when the functions are deactivated.

1. Certain countries 2. Option

3603563m

3603555m

3603548m

Switches in the centre console

Speed in miles per hour7

Current speed is displayed in mph.

Current fuel consumption

Continuous information on current fuel

consumption. Fuel consumption is calculated

every second. The figure in the display is

updated every few seconds. When the car is

stationary “----” is displayed.

NOTE! The displayed value may be slightly

off if a fuel-driven heater is used.

Average fuel consumption

The average fuel consumption since the last

reset (RESET). When the ignition is switched

off, the average fuel consumption is stored and

remains until reset with the RESET button (C)

on the lever.

NOTE! The displayed value may be slightly

off if a fuel-driven heater is used.

Range to empty fuel tank

Displays the range available with the remaining

fuel, calculated using the average fuel consump-

tion over the last 30 km (18 miles) and the

quantity of fuel remaining. When the range to

empty is less than 20 km (12 miles) “----” is

displayed.

NOTE! The displayed value may be slightly

off if a fuel-driven heater is used.

Trip computer

The trip computer displays the following

information:

 AVERAGE SPEED

 SPEED IN MILES PER HOUR

 CURRENT FUEL CONSUMPTION

 AVERAGE FUEL CONSUMPTION

 RANGE TO EMPTY FUEL TANK

Controls

In order to access the trip computer information

turn the ring (B) in steps, either forwards or

backwards. By turning again you return to the

starting point.

Average speed

The average speed since the last reset

(RESET). When the ignition is switched off,

the average speed is stored and used as the basis

of the new value when you continue driving.

This can be reset with the RESET button (C)

on the lever.

NOTE! If a warning message interrupts while

you are using the trip computer menu, you must

acknowledge the warning message. Then press

the READ button (A) to return to the trip

computer.

B C

3601859d

Trip computer

7. Certain countries

Cruise control (option)

Activating

The controls for cruise control are to the left in

the steering wheel.

Setting desired speed:

· Press the CRUISE button. “CRUISE” is

shown on the combined instrument panel.

· Touch + or - to lock the vehicle speed.

CRUISE ON appears on the combined

instrument panel.

Cruise control cannot be engaged at speeds

below 30 km/h or above 200 km/h.

2700412d

3603564

Increasing or decreasing

speed

· Increase or decrease the speed by pressing

and holding + or -.

The speed of the car when the button is

released is set as the new speed.

· A brief press (less than half a second) on +

· A temporary increase in speed (less than

one minute) using the accelerator, such as

while overtaking, does not affect the cruise

control setting. When you release the

accelerator, the car will return to the

programmed speed.

Temporary disengagement

Press 0 to disengage the cruise control

temporarily. CRUISE will be shown on the

combined instrument panel. The speed set

earlier is stored in the memory.

The cruise control is also temporarily disenga-

ged when:

· the brake pedal or clutch pedal is depressed

· speed falls below 30 km/h when travelling

uphill

· the gear selector is moved to position N

· wheel spin or wheel lock-up occurs

· a temporary increase in speed lasts longer

than one minute.

Return to a speed

When is pressed, the car resumes the

previously set speed.

“CRUISE ON” is displayed on the combined

instrument panel.

Disengagement

Press CRUISE to disengage the cruise control.

CRUISE ON goes out on the combined

instrument panel.

Lighting panel

Headlamp levelling

The load in the car changes the vertical

alignment of the headlamp beam, which could

dazzle oncoming motorists. Avoid this by

adjusting the height of the beam.

· Turn the ignition key to position II.

· Turn the headlamp control (1) to one of the

end positions.

· Roll the control up or down (3) to raise or

lower beam alignment.

Cars with Bi-Xenon headlamps (option) have

automatic headlamp levelling, so there is no

control (3).

Position lamps/parking lamps

The position lamps/parking lamps can be

switched on irrespective of ignition key

position.

· Turn the headlamp control (1) to the centre

position. In ignition key position II the

position lamps/parking lamps are always

on. The number plate lighting is switched on

at the same time as the position lamps/

parking lamps.

Headlamps

Automatic dipped beam

Dipped beam comes on automatically when

the ignition key is turned to position II, except

when the headlamp control (1) is in the centre

position. If necessary, the automatic dipped

beam can be deactivated by an authorised

Volvo workshop.

Manual dipped beam

If necessary, the automatic dipped beam can be

deactivated by an authorised Volvo workshop.

· Turn the ignition key to position II.

· Turn the headlamp control (1) clockwise to

the end position.

Main beam

· Turn the ignition key to position II.

· Turn the headlamp control (1) clockwise to

the end position.

· Move the left-hand stalk switch towards

the steering wheel to the end position and

release it, see page 43.

Fog lamp

NOTE! Regulations for use of fog lamps vary

from country to country.

Front fog lamps

The front fog lamps (option) can be switched

on along with the headlamps or the position

lamps/parking lamps.

· Press the button (2).

The LED in the button (2) lights when the

front fog lamps are switched on.

Rear fog lamp

The rear fog lamp can only be switched on

with the headlamps or the front fog lamps

(option).

· Press the button (4).

The rear fog lamp indicator symbol in the

combined instrument panel and the LED in the

button (4) come on when the rear fog lamp is

switched on.

Instrument lighting

The instrument lighting is switched on when

the ignition key is in position II and the

headlamp control (1) is in one of the end

positions. The lighting is automatically dimmed

during the day and can be controlled manually

at night.

· Roll the control up or down (5) for brighter

or dimmer lighting.

3501847m

Left-hand stalk switch, Steering wheel adjustment

WARNING!

Adjust the steering wheel before driving,

never while driving. Ensure that the steering

wheel is locked.

Stalk switch positions

1. Single flash, direction indicators

2. Continuous flashing, direction indicators

3. Main beam flash

Switching, main and dipped beam, and home

safe lighting

Direction indicators

Single flash

· Move the stalk switch up or down to

position (1).

When the stalk switch is released it returns to

its start position and the direction indicators

are switched off.

Continuous flashing

· Move the stalk switch up or down to end

position (2).

6400296A

Steering wheel adjustment

The steering wheel can be adjusted both

vertically and front-rear.

Push down the control on the left-hand side of

the steering column. Then adjust the steering

wheel to the position that suits you best. Ensure

that the steering wheel fastens in a determined

position (notch). Press the control back into

place to lock the steering wheel.

Switching, main and dipped

beam

The ignition key must be in position II for

main beam to be switched on.

· Turn the headlamp control clockwise to the

end position, see page 42.

· Move the stalk switch towards the steering

wheel to the end position (4) and release.

Main beam flash

· Move the stalk switch gently towards the

steering wheel to position (3).

Main beam comes on until the stalk switch is

released.

Home safe lighting

Some of the exterior lighting can be kept

switched on and works as home safe lighting

after the car has been locked. The time delay

is 30 seconds (factory setting), but can be

changed to 60 or 90 seconds by an authorised

Volvo workshop.

· Remove the key from the ignition switch.

· Move the stalk switch towards the steering

wheel to the end position (4) and release.

· Get out of the car and lock the door.

3602430m

The stalk switch remains in its end position

and is moved back manually, or automatically

by steering wheel movement.

Right-hand stalk switch

Windscreen wipers/washer

0 - The windscreen wipers are off when the

lever is in position 0. If the lever is moved

upward, the wipers swipe one stoke at a time

for as long as the lever is held up.

-Intermittent wiping. The speed of the

intermittent wipe can be adjusted and set. Twist

the ring (see 1 in illustration) upwards to

increase the wiper stroke frequency. Twist the

ring downwards to decrease the wiper stroke

frequency.

- Wipers operate at normal speed

- Wipers operate at high speed

Rain sensor (option)

The rain sensor automatically increases or

decreases the speed of the windscreen wipers

based on how much water it detects on the

windscreen.

The sensitivity of the rain sensor can be

adjusted using the ring (1).

· Turn the ring upward to increase sensitivity

or down to decrease sensitivity (there is an

extra swipe when the ring is turned upward).

On/Off

When activating the rain sensor, the ignition

key must be in at least position I and the

windscreen wiper lever must be in position 0.

To activate the rain sensor:

· press the button (2). An LED illuminates in

the button to indicate the rain sensor is

active.

To turn the rain sensor off:

· press the button (2) or

· move the lever downward to another wiper

program. If the lever is raised, the rain sensor

will remain active; the wipers make an extra

sweep and then return to rain sensor mode

when the lever is released to position 0.

3603483j

Important!

In an automatic car wash:

Turn off the rain sensor by pressing the

button (2) while the ignition key is in at

least position I. Otherwise, the wind-

screen wipers may start and be damaged.

The rain sensor is automatically deactivated

when the key is removed from the ignition

switch or five minutes after the ignition is

switched off.

Windscreen washer

Pull the lever towards the steering wheel to

activate the windscreen washer.

Headlamp washer

(option in certain markets)

Use of the windscreen washer automatically

activates the headlamp washer.

High-pressure wash of the headlamps

consumes a great deal of washer fluid.

To save fluid, the headlamps are only washed

every fifth time (within a ten minute period).

If ten minutes have elapsed since the last

windscreen washing, the headlamps receive a

high-pressure wash the next time the wind-

screen is washed.

Reduced washing

If only approx. one litre of washer fluid

remains in the reservoir, the supply to the

headlamps is cut off in order to prioritise

cleaning of the windscreen.

Important!

Use plenty of washer fluid when the wipers

are cleaning the windscreen. The windscreen

must be wet when the windscreen wipers are

operating.

Ignition and steering

wheel lock

0 Locked position

The steering wheel locks when the

ignition key is removed.

I Intermediate position -

“radio position”

Certain electrical components can be

connected. The engine electrical

system is not connected.

II Drive

The key position when driving. The

car’s entire electrical system is

connected. Diesel: Wait until pre-

heating is finished. See page 88.

III Start position

The starter motor is connected. Release the key

when the engine has started. The key springs

back to the driving position automatically.

If the key is difficult to turn the front wheels are

positioned so that there is tension in the steering

wheel lock. Turn the steering wheel back and

forth while turning the key.

Ensuring that the steering wheel is locked when

you leave the car minimises the risk of theft.

Ignition keys and electronic

immobilizer

The ignition key must not hang with other keys

or metal objects on the same key ring.

The immobilizer could be inadvertently

triggered, preventing the car from being started.

Ignition switch and steering wheel lock

WARNING!

Never switch off the ignition (key in the

position 0) or pull out the ignition key

while the car is moving. This can activate

the steering lock, which makes the car

impossible to drive.

Hazard warning flashers, rear window defroster, heated front seats

Hazard warning flashers

The hazard warning flashers (all direction

indicators flash) should be used when you are

forced to stop or park the car where it is a

hazard or hindrance to traffic.

Please remember: Regulations for using

hazard warning flashers vary from country to

country.

Front seat heater switch

Heated front seats

If you wish to have extra heat in the front

seat(s) carry out the following:

· Press once: High heat - both LEDs in the

switch light up.

· Press once again: Low heat - one LED in

the switch lights.

· Press once again: heating switched off

(no LEDs are lit).

8702784d

3601944d

8702783d

Heated door mirrors

Rear defroster

Use the defroster to remove ice and misting

from the rear window and door mirrors.

Pressing the switch starts heating the rear

window and the door mirrors at the same time.

The LED in the switch lights. A built-in timer

automatically deactivates the door mirror

defroster after about 4 minutes and the rear

window defroster after about 12 minutes.

8702787d

Your Volvo workshop can adjust the

temperature.

Parking brake lever

Parking brake, Electrical socket/cigarette lighter

3601974d

3601943e

Electrical socket/

cigarette lighter

The cover should always be in position if the

socket is not being used as a power source or

as a cigarette lighter socket. The maximum

current is 10A.

Parking brake (handbrake)

The lever is located between the front seats. The

parking brake operates on the rear wheels. The

warning symbol in the combined instrument

panel lights when the brake is applied. Pull up

the lever slightly and press in the button to

release the brake.

Remember that the warning symbol in the

combined instrument panel lights even if the

parking brake is only “slightly” applied. Check

that the brake is applied correctly. Pull the

brake hard and make sure it fastens in a

“notch”

5500045e

Electrical socket for the rear seatElectrical socket at the front seat

Power windows

*When you have finished your trip and

removed the ignition key, you can still close or

open the windows as long as you have not

opened either of the front doors.

3601867d

The power window switches in the rear seat can

be blocked from the switch on the driver’s door

switch panel. Always remember to break the

current to the power windows (that is to say

remove the ignition key and open one of the

front doors) when you leave children in the car

unattended.

LED in the switch unlit:

The rear door windows can be operated both by

the switch in each door but also by the switch in

the driver’s door.

LED in the switch lit:

The rear windows can only be operated from

the driver’s door.

position (AUTO-DOWN - AUTO-UP*), the

power windows open or close automatically.

If you close the front windows using the AUTO

function an integrated clamp protection is

activated if the window is blocked by any

object.

NOTE! The AUTO-UP function on the

passenger side is only available on some

markets.

The power windows are operated using the

switches in the door armrests. The ignition key

must be turned to the radio or driving position*

for the power windows to function. The

window opens when you depress the front

section of the switch and closes when you pull

up the front section of the switch.

Windows can be opened or closed from the

front seat two ways.

1. Press the switch gently downwards or pull it

gently upwards. The power windows go up or

down as long as the switch is affected.

2. Press the switch all the way down, or pull it

all the way up, and then release it. In this

Rear power window switches

8301395M

WARNING!

If there are children in the car:

· Remember to switch off the supply to the

power windows by removing the ignition

key if the driver leaves the car.

· Make sure that children’s and other

passengers’ hands are clear when closing

the windows.

If the rear door windows are operated from

the driver’s door or with the remote control:

· Check that none of the rear seat passen

gers are in danger of getting their hands

caught when closing the windows.

Rearview mirror

8301236d

Rearview mirror

A. Normal position.

Dimming position. Use this if headlamps

from the cars behind irritate you.

Certain models have an autodim function,

which leads to an automatic dimming based on

current light conditions.

Seat belt reminder

The seat belt warning symbol above the

rearview mirror flashes as long as the driver’s

seat belt has not been connected.

Door mirrors

The switches for setting the two outer door

mirrors are furthest forward on the driver’s

door armrest.

Press the switch. L = left door mirror.

R = right door mirror. LED in the switch lit:

Adjust the postion with the adjustment control.

When you have set the position press the

switch once. The LED should no longer be lit.

Switches, power door mirrors

Door mirrors with memory

function (option)

If the car has door mirrors with memory

function, they work together with the memory

setting of the seat, see page 68.

NOTE! The above only applies if your Volvo

is equipped with a driver’s power seat.

Memory function in the remote control

When you unlock the car with the remote

control and change the setting of the door

mirrors, these new settings are saved in the

remote control. The next time you unlock the

car with the same remote control and open the

driver’s door within two minutes, the mirrors

will assume their stored positions.

8802799r

Important!

Use the defroster (see page 46) to remove

ice from the mirrors, not an ice scraper. The

scraper could scratch the mirror glass.

WARNING!

Adjust the door mirrors before starting off!

The outer half of each door mirror is a wide-

angle mirror that provides a better overview.

This may make objects appear farther away

than they really are.

8302234r

Power sunroof (option)

Sunroof controls are located in the headlining.

The sunroof can be opened in two different ways:

· Raise/lower trailing edge(ventilation position)

· Rearwards/forwards (opening position/

comfort position*)

The ignition key must be in position I or II.

Ventilation position

Open: Push the trailing edge of the switch (5)

upwards.

Close: Pull the trailing edge of the switch (6)

downwards.

It is possible to switch directly from the ventila-

tion position to comfort position*: pull the

control backwards to its end position (4) and re-

lease.

* In comfort position, the sunroof is not comple-

tely open in order to reduce the level wind noise.

Opening position/comfort position*

Automatic control

Move the control over the resistance point

position (3) to the rearmost end position (4) or

over the resistance point position (2) to the front

end position (1) and release. The sunroof will

open to the comfort position* or will close

completely.

Open from comfort position* to max. opening:

pull the control to the rear once more to the end

position (4) and release.

8301747m

1. Automatic closing

2. Manual closing

3. Manual opening

4. Automatic opening

5. Opening ventilation position

6. Closing ventilation position

Manual control

Open: Pull the switch rearwards to the resistance

point position (3). The sunroof will move towards

maximum opening position as long as the switch is

held in this position.

Close: Press the switch forwards to the resistance

point position (2). The sunroof will move towards

its closing position as long as the switch is held in

this position.

Pinch protection

NOTE! The sunroof pinch protection function

is activated if the hatch is blocked by an object.

If blocked, the sunroof will stop and automatic-

ally open to the previous open position. This

function will be activated only when the

sunroof is in the open position.

Make sure the sunroof is properly closed

before leaving the car.

WARNING!

Pinch protection functions only in the

opening position - not in ventilation position.

WARNING!

· Make sure that the hands of children and

passengers are clear when closing the

sunroof.

If there are children in the car:

· Remember to switch off the supply to the

sunroof (remove the ignition key) if the

driver leaves the car.

Sun screen, Sun blinds (option)

Sun blind - rear window

Pull the sun blind up from the parcel shelf and

hook it into the holes above the rear window, as

illustrated.

Sun blinds - rear side

windows

Lower the window slightly. Hook the sun blind

(A) onto the top edge of the window. You can

now raise and lower the window as you wish.

8301256d

Sun screen

The sunroof also has an inner manually sliding

sun screen. The sun screen slides back

automatically when the sunroof is opened.

Laminated side windows

(option)

The laminated windows in the front and rear

doors improve sound insulation in the passen-

ger compartment and provide better protection

against unauthorised entry.

Laminated side windows (option), Water-repellent coating (option)

Important!

· Do not use a metal ice scraper to remove

ice from the windows. The water and

dirt-repellent coating could be damaged.

· Use the defroster to remove ice from the

mirrors.

Water and dirt-repellent

coating on the front windows

and/or door mirrors (option)

The front windows and/or door mirrors are

treated with a coating that ensures that visibility

through the windows or in the mirrors is good

even if it is raining. For information on glass

care, see page 142.

Side windows and mirrors

treated with the water and/or

dirt-repellent coating are

marked with a little symbol.

Rearview mirror/door mirrors

In certain weather conditions, the function of

the dirt-repellent coating is improved if the door

mirror defroster is used, see page 46.

Defrost the door mirrors:

· if they are covered with ice or snow

· in heavy rain and dirty road conditions

· if they are misted.

Climate control

Air distribution 54

Your climate control system - useful hints 55

Electronic Climate Control ECC 56

Electronic Climate Control ECC with Interior Air Quality system 57

Electronic Climate Control ECC - manual settings 59

Manual climate control with air conditioning (AC) 60

Fuel-driven parking heater (option) 62

Air distribution

Air vents in the dashboard

A Open

B Closed

C Directing airflow laterally

D Directing airflow vertically

· Aim the outer vents towards the side

windows to remove misting.

· In cold climates: close the centre vents

for the most comfortable climate and best

demisting.

Air vents in the dashboard

8702835d

Air vents in the door pillars

A Open

B Closed

C Directing airflow laterally

D Directing airflow vertically

· Aim the vents toward the rear side windows

to remove misting.

· Aim the vents inwards into the car if you

wish to have a comfortable climate in the

rear seat.

· Bear in mind that small children are

sensitive to airflow and draughts.

Air vents in the door pillars

8702826d

8702818d

Air distribution

The incoming air is distributed through 14

different air vents located in different parts of

your car.

Your climate control system - useful hints

Misting on window interiors

A good way to reduce the problem of misting

on the insides of the windscreen and other

windows is to clean them. Use a normal

window cleaner. Bear in mind that you must

clean them more often if someone smokes in

the car.

Ice and snow

Remove ice and snow from the climate control

air intake (the grille between the bonnet and the

windscreen).

Particle filter

Make sure the particle filter is replaced

regularly. Consult your Volvo workshop.

Actual temperature - ECC

The temperature you select corresponds to the

physical experience with reference to air speed,

humidity, exposure to sun, etc. which affect the

interior and exterior of the car.

Sensors - ECC

The sun sensor is on the upper portion of the

dashboard. Remember not to cover it. Do not

cover the passenger compartment temperature

sensor on the climate control panel.

Side windows and sunroof

For the air conditioning (A/C) system to operate

satisfactorily the side windows and sun roof

should be closed. Also, remember not to block

the evacuation channels in the parcel shelf.

Acceleration

The air conditioning system switches off

temporarily at full acceleration. You may feel

a temporary rise in temperature.

Condensation

In warm weather conditions condensation from

the air conditioning (A/C) system may drip

under the car. This is completely normal.

Fault tracing

Your Volvo workshop has the instruments and

tools required for any fault tracing or repair of

your climate control system. Entrust checks and

repairs only to trained personnel.

Refrigerant

Refrigerant R134a is in the air conditioning

system. This contains no chlorine, which means

it is harmless to the ozone layer.

Use only R134a when topping up/refilling

refrigerant. This work should be performed by

an accredited workshop.

Fuel economy - Electronic

Climate Control (ECC)

With ECC, the air conditioning system is

controlled automatically and is used just

enough to cool the passenger compartment and

dehumidify the incoming air.

This provides better fuel economy compared to

conventional systems where the air conditio-

ning cools the air to just above freezing point.

Ventilation fan function

When the engine is off (and if the ignition key

is in position I or II), the ventilation fan is

automatically switched off. This is to prevent

the battery from becoming discharged.

To activate the ventilation fan, turn the fan

control and set the desired speed.

8704253d

MAN

AUT

Electronic Climate Control ECC

Seat heater,

right-hand side

Defroster, rear window

and door mirrors

Defroster, windscreen and

side windows

Temperature,

left hand side

Passenger compartment

temperature sensor

Recirculation

AUTO

AC On/Off

Fan

Temperature

right-hand side

Seat heater left

hand side

Air distribution

Recirculation/Interior Air Quality System

Keep in mind the following:

· Make it a rule to have the air quality sensor

activated at all times.

· Recirculation is limited in cold climates to

avoid misting.

· In the event of misting, you should

disconnect the air quality sensor.

· In the event of the windows misting up you

can use the windscreen and side window

defroster functions. See next page.

· Follow the Volvo service programme for

the recommended interval for multifilter

replacement.The Multifilter may need to be

changed more often if you drive in heavily

polluted environments.

Electronic Climate Control ECC with Interior Air Quality system (option)

Operation:

Press

8702780d

to activate the air quality sensor

(normal setting).

Or select one of three functions by

pressing

8703250d

MAN

AUT

1. Press

8703250d

MAN

AUT

: the LED AUT lights. The air

quality sensor is now activated.

2. Press

8703250d

MAN

AUT

: no LED lights. Recirculation

is not activated unless needed to cool.

3. Press

8703250d

MAN

AUT

: the LED MAN lights.

Recirculation is now activated.

You can switch between these three functions

by repeatedly pressing

8703250d

MAN

AUT

Multifilter with

Air quality sensor (option)

Some cars are equipped with a multifilter and

air quality sensor. The multifilter separates

gases and particles, thus reducing the volume of

odours and contaminants entering the car. The

air quality sensor detects increased levels of

contaminants in the outside air. When the air

quality sensor detects contaminated outside air,

the air intake is closed and the air inside the

compartment is recirculated. The multifilter also

cleans the air recirculating in the compartment.

When the air quality sensor is connected, the

green AUT LED lights in

8703250d

MAN

AUT

8703250d

MAN

AUT

Electronic Climate Control ECC

AUTO

The AUTO function regulates climate control so

that the selected temperature is attained. The

automatic function controls heating, air condition-

ing, fan speed, recirculation and air distribution. If

you select one or more functions manually, the

other functions continue operating automatically.

All manual settings are switched off when AUTO is switched on.

8702780d

Temperature

The two knobs can be used to set the temperature for

the passenger and driver’s sides of the car. Remember

that it will not heat or cool any quicker even if you

select a higher or lower temperature than you wish to

have in the passenger compartment.

8702779d

8702782d

Defroster -

rear window and door mirrors

Use this button to quickly remove ice and misting

from the rear window and door mirrors. See

page 46 for more information about this function.

8702783d

Defroster -

windscreen and side windows

Use this button to quickly remove misting and ice

from the windscreen and side windows. The air

flows to the windows at high fan speed. The LED

in the defroster button lights when this function is

activated. The air conditioning system is now controlled so that the air is

maximally dehumidified. The air is not recirculated.

8702776d

AC - On/Off

When the ON LED lights the air conditioning

(A/C) system is controlled automatically by the

system. In this way incoming air is cooled and

moderately dehumidified. When AC OFF is

selected and the OFF LED lights the air conditio-

ning (A/C) system is always disconnected, other functions are still

controlled automatically. The air conditioning (A/C) system operates down

to approximately 0 °C.

When you select Defroster

the air conditioning system is controlled

so that air is maximally dehumidified.

8702777d

8702784d

Heating the front seats

See page 46 for more information.

Recirculation

(see also page 60)

The best cooling in warm

climates is achieved by

selecting the AUTO function.

The recirculation is then controlled automatically. Manual recirculation can

be selected if you wish to shut out bad air, exhaust fumes etc. The air in

the passenger compartment is recirculated; no air from outside the car is

taken into the car when

is activated. The LED in the switch is lit.

If you allow the air in the car to recirculate there is a danger of misting

and icing in the car, especially during the winter.

The timer function (cars with multifilters and air quality sensors

have no timer function) minimises the risk of ice, misting and bad air.

Carry out the following to activate it. Press

for more than

3 seconds. The LED flashes for 5 seconds. The air in the car recirculates

for 3-12 minutes depending on the outer temperature. Each time you press

the timer function is activated. If you wish to switch off the timer

function, press

again for more than 3 seconds. The LED lights for

5 seconds to confirm your selection.

If you select Defroster

, recirculation is always disconnected.

Press AUTO to return to automatic air distribution.

Fan

Fan speed can be increased or decreased by

turning the knob. If AUTO is selected, fan speed is

controlled automatically. The previously set fan

speed is disconnected.

NOTE! If the knob for the fan has been turned so far that the left

LED above the knob lights up with an orange light, the fan and the

air conditioning (A/C) system are switched off.

8703250d

MAN

AUT

8702781d

Air to windows.

Air to head and body.

Air to legs and feet.

Air distribution

Electronic Climate Control ECC - manual settings

8702778d

Manual climate control with air conditioning (AC)

AC - On/Off

(ON/OFF)

The air conditioning is

connected to the cooling and

dehumidification function

when the ON LED lights. The air conditioning is

disconnected with the OFF LED lights.

When you select Defroster

, the air conditio-

ning is always connected, unless the fan is set at

position 0.

Fan

Fan speed can be increased

or decreased by turning the

knob. If the knob is set to 0,

the air conditioning is

disconnected.

Recirculation

Recirculation, together with your air conditioning

(A/C) control, helps to cool a warm cabin more

quickly. This function can also be used to exclude

bad air, exhaust fumes etc. The air in the passenger

compartment is recirculated; no air from outside the car is taken into the

car when the button

is activated. The LED in the switch is lit. If you

allow the air in the car to recirculate there is a danger of misting and icing

in the car, especially during the winter.

Heating/Cooling -

left side

Turn to adjust the heating or

coooling of the incoming air.

The air conditioning must

be connected to receive

cooled air.

Heating/Cooling -

right side

Turn to adjust the heating or

coooling of the incoming air.

The air conditioning must

be connected to receive

cooled air.

The timer function minimises the risk of ice, misting and bad air. To

activate the function: press

for more than 3 seconds. The LED flashes

for 5 seconds. The air in the car recirculates for 3-12 minutes depending

on the outer temperature. Every time you press

the timer function is

activated. If you wish to switch off the timer function, press

again for

more than 3 seconds. The LED lights for 5 seconds to confirm your

selection.

Recirculation is always disconnected when you select Defroster

8702777d

8702831d

8702834d

8702611d

8702776d

Here is some supplementary

advice and information:

· You must turn the fan knob (from the

0 position) to connect the air conditioning.

· Use the air conditioning at low temperatures

(0 - 15 °C) to dehumidify incoming air.

Defroster - rear

window and

door mirrors

Use this button to quickly

remove ice and misting

from the rear window and door mirrors. See

page 46 for more information about this

function.

Use

8702787d

8702833d

Use the air distribution control positions (marked with dots) between the

different symbols to fine-tune air distribution for maximum comfort.

8702784d

Heating the

front seats

See page 46 for more

information.

Air distribution

When you want good cooling in a

warm climate.

Air to floor and air vents.

Air to floor. There is a certain

amount of airflow to the air vents

and the defroster vents for the

windscreen and side windows.

Air to both floor and windows.

There is a certain amount of

airflow to the air vents.

Air to windows In this position the

air does not recirculate. The air

conditioning (A/C) system is always

connected. There is a certain amount

of airflow to the vents.

Air through front and rear air vents.

When you want to remove ice and misting.

High fan speed is good for this.

When you want comfortable conditions

and good demisting in a cold climate. Not

too low a fan speed.

When you want to warm your feet.

In sunny weather with cool outside

temperature.

Manual climate control with air conditioning (AC)

Fuel-driven parking heater (option)

B C

3602296d

General

The electrical system must be awakened be-

fore the parking heater can be programmed.

This is most easily done by:

· pressing the READ button or

· pressing the main beam flash or

· turning on the ignition.

The parking heater can be started immediately

or set with two different start times using

TIMER 1 and TIMER 2.

Here, start time refers to the time point the car

should be completely warmed up.

Vehicle electronics calculates start time based

on current outside temperature. If the outside

temperature exceeds 25 °C, heating is not

switched on.

WARNING!

 Switch off the fuel-driven heater before

refuelling. Spilled fuel could be ignited by

the exhaust gases.

 Check the information display to ensure

the heater is off (PARK HEAT ON is

shown on the display when the parking

heater is active).

parking heater runs a maximum of 60 minutes.

If the parking heater does not start despite re-

peated attempts, a message is shown on the

display. Contact an authorised Volvo work-

shop.

Messages on the display

Once the settings for TIMER 1, TIMER 2

and DIRECT START are activated, the am-

ber warning symbol in the combined instru-

ment panel lights and explanatory text is

shown on the display.

When you leave the car, you will receive a

message regarding the current settings of the

system.

Parking on a hill

If you park your car on a steep incline, the

front of the car should be facing up the slope

to ensure the supply of fuel to the parking

heater.

Car clock/timer

For safety reasons, all timer settings will be

cleared if the car clock is reset after timer

settings have been made.

WARNING!

The car must be outdoors when the petrol

or diesel heater is used.

WARNING!

AVERTISSEMENT!

ACHTUNG!

8903920d

Warning decal on fuel filler flap

At temperatures of -10 °C and below, the

Fuel-driven parking heater (option)

Battery and fuel

If the battery is not sufficiently charged or the

petrol tank is close to empty, the parking heater

will be switched off.

If this is the case, a message will appear on the

display. Confirm the message using the READ

button (A).

Important!

Repeated use of the parking heater combined

with only short journeys can discharge the

battery and impair starting.

In order to ensure that the generator receives

sufficient time to produce the amount of

energy needed without discharging the battery

as a result of regular heater use, drive the car

for a period equalling the time during which

the heater has been active.

Setting TIMER 1 and 2

For reasons of safety, you can only programme

times for the following 24 hours, not several

days in a row.

1. Use the ring (B) to toggle to TIMER 1.

2. Briefly press the RESET button (C) so

that the hours setting starts to flash.

3. Use the thumb wheel to set the desired

number of hours.

4. Briefly press the RESET button so that the

minutes setting starts to flash.

5. Use the ring (B) to set the desired minutes.

6. Briefly press the RESET button to confirm

your setting.

7. Press the RESET button to activate the

timer.

After setting TIMER 1, toggle to TIMER 2.

Settings are made the same way as for TIMER 1.

Deactivating timer-started heating

Do as follows to manually switch off the heater

before the set time has elapsed:

1. Press the READ button (A).

2. Use the ring (B) to toggle to PARK HEAT

TIMER 1 (or 2). The text ON flashes.

3. Press the RESET button (C). The text OFF

is displayed with a steady glow and the

heater is switched off.

Direct start of heater

1. Use the ring (B) to toggle to DIRECT

START.

2. Press the RESET button (C) to make ON

and OFF selections available. Select ON.

The heater will now run for 60 minutes.

Heating of the passenger compartment will

begin as soon as the engine coolant has reached

an adequate temperature.

Deactivation of heater after direct start

1. Use the ring (B) to toggle to DIRECT

START.

2. Press the RESET button (C) to make ON

and OFF selections available. Select OFF.

B C

3602296d

Auxiliary heater (diesel)

(certain countries)

Extra heat from the additional heater may be

required in cold weather to reach the correct

temperature in the passenger compartment.

The additional heater starts automatically

when extra heat is required if the engine is run-

ning. It is switched off automatically when the

correct temperature is reached or when the

engine is switched off.

Interior

Front seats 66

Interior lighting 69

Storage compartments 70

Centre console storage compartments, Load curtain 71

Spare wheel, Warning triangle 72

Coat hanger, Cup holders in armrest 73

Long loads 74

Front seats

The drivers and passenger seats can be

adjusted to the optimum sitting and driving

positions.

1. Forward/rearward: Lift the handle to

adjust the distance to the steering wheel

and pedals. Check that the seat is locked

after changing position.

2. Raise/lower front edge of seat cushion:

pump up/down.*

3. Raise/lower seat: pump up/down.

4. Adjust lumbar support: turn the wheel.

5. Adjust backrest rake: turn the wheel.

6. Power seat control panel.

* The control panel (2) is not available with

certain upholstery alternatives.

WARNING!

 Adjust the position of drivers seat

before setting off, never while driving.

 Check that the seat is locked in position.

8504932m

8502027e

Adjust the head restraint vertically

Rear seat head restraints

The centre seating position head restraint is

adjusted vertically according to the height of

the passenger. Press the head restraint up or

down as necessary. To move the head restraint

up or down, you must press the release button

behind the left-hand support. See illustration.

If the integrated booster cushion is used, the

head restraint must be carefully positioned to

suit the child.

Folding the front passenger seat, Rear seat head restraints

8501727A

Folding the front passenger seat

The front passenger seat backrest can be folded to a horizontal position

to make room for a long load. Fold the backrest as follows:

· Move the seat as far back as possible.

· Adjust the backrest to the upright position.

· Lift the catches on the rear of the backrest.

· Fold the backrest forward.

· Slide the seat forward so that the head restraint is locked in place

under the glovebox.

Front seats

Power seat (option)

Preparations

The seat is usually adjusted with the ignition

key is in position I or II. It can also be adjusted

within 4.5 minutes of unlocking the door with

the key or remote control. If the door is closed

but the ignition key has not yet been inserted in

the ignition switch or is in position 0 in the

ignition switch, settings can be made within 40

seconds of closing the door.

Memory function in the remote control

(option)

If the setting of the seat is changed, the new

setting is saved in the remote control used to

lock the car. The next time the car is unlocked

using that remote control and the driver’s door

is opened within five minutes, the driver’s seats

and door mirrors assume the stored positions.

Seat adjustment

The switches can be used to make the following

adjustments:

1. Front edge of seat cushion up/down

2. Seat forward/rearward

3. Seat up/down

4. Backrest rake

The seat can be moved in one direction at a

time.

The power seats have an overload protector

that activates if a seat is blocked by an object.

If this occurs, switch off the ignition (posi-

tion 0) and wait 20 seconds before operating

the seat again.

Seat with memory function

(option)

5. Setting seat and door mirrors, program 1

6. Setting seat and door mirrors, program 2

7. Setting seat and door mirrors, program 3

8. Storing preset positions

Three positions can be stored. After adjusting

the seat, hold the MEM (8) button depressed

while pressing the button (5). Further seat and

door mirror settings can be stored using

memory buttons (6) and (7).

Setting preset positions

Press and hold one of the memory buttons (5),

(6) or (7) until the seat stops. If you release

the button, the seat stops immediately for

safety reasons.

Emergency stop

If the seat accidentally begins to move, press

one of the buttons to stop the seat.

WARNING!

 Ensure that there is nothing in front

of, behind or under the seat during

adjustment.

 Make sure that none of the backseat

passengers will be trapped.

 Make sure that children do not play

with the switches, to avoid the risk of

getting trapped.

8505020m

Interior lighting

Rear reading lampsGeneral lighting and front reading lamps

General lighting

General lighting lights up and goes out when you

press the button. General lighting comes on

automatically* and remains lit for 30 seconds:

· When you unlock the car from the outside

using the key or remote control.

· When you have stopped the engine and

turned the ignition key to position 0.

General lighting lights up and remains lit for

10 minutes:

· When one of the doors is open.

* The function is light-dependent and is only

activated when it is dark.

General lighting goes out:

· When the engine is started.

· When you lock the car from the outside

using the key or remote control.

General lighting can be switched off or on in all

situations by briefly pressing the button.

When you switch the light on, it remains lit for

10 minutes.

You can disconnect the automatic function by

pressing the button for more than 3 seconds.

When you then briefly press the button, the

automatic function reconnects.

The pre-programmed times of 30 seconds and

10 minutes can be changed. Contact an

authorised Volvo workshop.

3500887e

Vanity mirror in the sun visor

Front and rear reading lamps

Reading lamps in the front and rear seats can

be switched on or off by pressing the respective

button. Reading lamps are switched off

automatically after 10 minutes if not switched

off manually.

Vanity mirror

The lamps come on when you open the cover.

8504139

3501410r

Storage compartments

WARNING!

Make sure that no hard, sharp or heavy objects lie on or in

(or protrude from) the parcel shelf, map pocket or other

storage compartments where they might cause injury during

heavy braking. Always fasten large heavy objects with one of

the seat belts.

8505249e

Centre console storage compartments, Load curtain

Ashtray (option)

To empty the ashtrays:

Front seat: pull the ashtray straight upwards.

Rear seat: press the ashtray downwards and

remove.

Retaining strap in cargo

compartment (option)

The retaining strap can be used to secure lighter

objects, such as grocery bags or hand luggage.

Pull it out. It works like a seat belt and has a

locking function.

Pull the release tab to release the retaining strap

from its locked position and pull it out further.

The retaining strap can be fixed in two

positions. When securing the strap in position,

press until there is an audible click.

NOTE! If you have an extra plastic mat with

edges that go up along the sides of the cargo

compartment, you must cut a groove in the mat

so that the retaining strap can run freely.

8502003d

8501983E

Cup holder

(option)

Some models are

equipped with cup

holders for the front and rear seat occupants.

To open the cup holders in the front seats,

press the left-hand button in the centre console

to open the drivers cup holder and the cover

below to open the passenger-side cup holder.

To close the passenger-side holder after use,

the arms must be pressed inwards as indicated

by the arrows on the holder. You can also use

the storage compartment in the centre console

for cassette tapes and the like.

Spare wheel, Warning triangle

Warning triangle (certain countries)

Follow the regulations concerning warning triangles of the country you are

in. Carry out the following when the warning triangle is required for use:

· Turn both attachment screws to the vertical position.

· Carefully remove the warning triangle case.

· Remove the warning triangle from its case (A).

· Fold out the four support legs on the warning triangle.

· Fold out and secure the two remaining sides of the warning triangle.

· Place the warning triangle in a suitable position. Think about the

position of the car and the traffic.

After use:

· Pack everything in reverse order.

· Make sure the warning triangle and its case are properly secured in

the boot lid.

8901312d

Floor support

Warning triangle

Spare wheel, tools, jack

The spare wheel with the jack and tool kit can be found under the floor

of the cargo compartment. Carry out the following to remove the spare

wheel:

· Fold the floor inwards.

· Lift and remove the floor support that sits in the spare wheel moun-

ting. Cars with a Temporary Spare also have a floor support in the

rear left-hand corner of the cargo compartment. Pull the support

upwards to facilitate removing the spare wheel.

· Lift out the jack and tool kit.

· Unscrew the mounting and lift out the spare wheel.

· Return and secure everything in the reverse order. Make sure that the

spare wheel is fixed in place and that the jack and tool kit are

properly secured with the straps on the mounting.

Tool kit with

towing eye

Jack

Mounting

Spare wheel

Floor support

7700231d

Jack

Coat hanger

The coat hanger is only intended for light

garments.

8503126m

Coat hanger, Cup holders in armrest

8504929

Cup holders in the rear seat

armrest

Long loads

Tipping the backrests forward

One or both of the rear seat backrests can be

folded down from the cargo compartment for

transporting long objects. Pull the handle(s) in

the cargo compartment. The head restraints

must be in the upright position. Then tip the

backrest or backrests forward. The centre head

restraint may need to be adjusted.

When raising the backrests, ensure that they

are properly secured and locked.

Hatch for long objects

A hatch in the right-hand rear backrest allows

you to transport long objects such as skis and

planks.

Open the hatch as follows:

- Fold the left-hand backrest and centre

armrest forwards.

- Release the hatch by pushing the catch

upward while folding the hatch forward.

- Tip the backrest back into position with

the hatch open.

Use the seatbelt to secure the load.

8501931e

WARNING!

Always secure the load. During heavy

braking the load may otherwise shift,

causing personal injury. Cover sharp edges

with something soft. Turn off the engine

and apply the parking brake when loading

or unloading long objects! You may

accidentally knock the gear lever or gear

selector with the load and cause a gear to

engage and the car to move off.

8502002d

Always secure long loads!

8501909d

NOTE! If your Volvo is equipped with an

integrated booster cushion, you must fold

this out first.

The cover on the rear seat armrest/child seat

has no hinge. The cover must be removed

before the ski hatch is used.

When removing:

- Open the cover 30°

- pull straight up.

When fitting:

- move the cover back in the grooves behind

the upholstery

- close the cover

Long loads

Locks and Alarm

Immobilizer, remote control 78

Locking and unlocking 79

Replacing the battery 80

When it is dark, deadlocks 81

Child safety lock, Service locking 82

Alarm 83

8302187

Doors and locks

Keys - Immobilizer

Your car is delivered with two master keys and

one service key*. One of the master keys is

foldable and equipped with an integrated remote

control.

Master key

This key operates all locks

Service key*

For driver's door, ignition switch and

steering wheel lock only.

*: certain markets only

Remote control functions

1. Unlocking

Press button (1) to unlock all doors, the boot lid

and the fuel filler flap.

2. Boot lid

Press button (2) twice to unlock the boot lid

only.

3. Alarm function

The alarm function can be used to attract

attention during emergency situations. If the red

button (3) is held for at least 3 seconds or is

1. Unlock 2. Open boot lid

3. Alarm function 4. Approach lighting

5. Lock 6. Fold/open key

Loss of key

If you should lose one of your keys, bring the

remaining keys to an authorised Volvo

workshop. As a crime prevention measure, the

code for the lost key is erased from the system

and the other keys must be re-coded in the

system.

The key blades unique code is available at

authorised Volvo workshops, which can

produce new key blades.

A maximum of six remote controls/key blades

can be programmed and used for one single car.

Immobilizer

Each key has an integrated coded chip. The code

must be the same as the code in the ignition

switch receiver. The car can only be started if

the correct key with the correct code is used.

Ignition keys and electronic immobilizer

The ignition key must not hang with other keys

or metal objects on the same key ring. The

immobilizer could be inadvertently triggered,

preventing the car from being started.

8302498d

Locking and unlocking

Locking and unlocking the

car from the outside

Using the master key or its remote control, all

the doors and the boot lid can be locked or

unlocked from the outside at the same time.

When the vehicle is locked, the door locking

buttons and interior door handles are

disconnected.

Using the master key or its remote control, all

the doors and the boot lid can be unlocked from

the outside at the same time.

If the car is locked from the outside, the fuel

filler flap locks after a 10-minute delay.

8301290d

Locking and unlocking the

car from the inside

All doors and the boot lid can be locked and

unlocked at the same time using the switches in

the door panel (applies if the vehicle is opened

with the master key).

Additionally, each door can be locked with the

lock button and unlocked by opening the door

using the handle.

The above situation is valid, as long as you

haven’t locked the car from the outside!

8302186

pressed twice in succession during the same

amount of time, the direction indicators and horn

will be activated. The alarm is deactivated

automatically after 25 seconds or by pressing

any of the buttons on the remote control.

4. Approach lighting

Do the following when you approach the car:

Press the yellow button (4) on the remote

control.

The interior lighting, parking lamps, number-

plate lighting and the lamps in the door mirrors

(option) will switch on. If a trailer is attached to

the car, the trailer lights will also be switched

on. These lights will remain lit for 30, 60 or

90 seconds. An appropriate time setting for

your car can be performed at an authorised

Volvo workshop.

In order to switch off Approach lighting:

press the yellow button again.

5. Locking

Lock all doors, boot lid and fuel filler flap with

button 5. There is a delay of approx. 10 minutes

for the fuel filler flap.

6. Folding/opening key

The key can be folded by pressing button 6

while folding the key blade into the keypad.

The folding key will open automatically with

one press of the button.

Locking and unlocking, Replacing battery

Unlocking the boot lid with

the master key

Normally the boot lid is locked or unlocked

when you lock or unlock the car using the

master key in the driver’s door or the remote

control. The boot lid can be opened by slowly

pressing the button on the remote control twice

within three seconds, or by pressing the boot

lid opener. The master key should only be used

to unlock the boot lid in emergency situations

(if the remote control is broken or if the car is

without power). In such cases: insert the master

key into the upper or lower part of the plug

covering the lock. Twist the key upwards or

downwards and remove the plug. Then unlock

the boot lid.

Automatic locking

The doors lock automatically when vehicle

speed exceeds 7 km/h and remain locked until a

door is opened from the inside or are unlocked

using a central locking button.

Unlocking/locking the boot lid

with the remote control

Do as follows to unlock the boot lid only:

· Press the remote control button for the boot

lid two times. The boot lid is unlocked and

opens slightly.

If all doors are locked when you close the boot

lid, it locks automatically.

Replacing the battery

If the locks repeatedly fail to react to signals

from the remote control at a normal distance, the

battery should be replaced at the next service

interval or within the course of a couple of

weeks.

· Remove the cover by carefully prising up

the rear edge with a small screwdriver.

· Change the battery (type CR 2032, 3 volt),

the plus side should be up. Avoid touching

the battery and its contact surfaces with your

fingers.

· Refit the cover. Make sure the rubber seal is

properly fitted and free from damage to

prevent water form entering.

· Turn the old battery in to your Volvo

workshop so that it is disposed of in an

environmentally friendly way.

Automatic relocking

If none of the doors or the boot lid is opened

within two minutes of being unlocked with the

remote control from the outside, all locks

will be automatically relocked. This function

prevents you from inadvertently leaving the car

unlocked.

For cars with an alarm, see page 83.

NOTE! If the boot lid was opened with the

button on the remote control, it will not

automatically relock.

8302194

8302195m

When it is dark, deadlocks

Deadlocks*

Your car has a special deadlock position which

means that the doors cannot be opened from the

inside if they are locked. Deadlocks can only be

activated from the outside by the driver’s door

being locked with the key or remote control. All

doors must be closed before deadlocks can be

activated.

The doors then cannot be opened from the

inside. The car can only be unlocked from the

outside via the driver’s door or by using the

remote control (this only applies to cars that are

equipped with deadlocks). The car cannot be

opened by manipulating the door buttons from

the outside.

Deadlocks are engaged after a 25 second delay

once the doors have been closed.

WARNING!

Do not allow anyone to remain in the car

without deactivating the deadlock

Deactivating deadlocks

If someone wishes to remain in the car but you

still wish to lock the doors from the outside the

deadlocks can be disconnected. From the time

the key is turned from position II until you lock

the car, or as long as the centre console is

supplied with current, you can press the button.

The LED in the button then comes on and stays

on until you lock the car using the key or

remote control. A message is displayed as long

as the key remains in the ignition switch. The

deadlock is now disconnected. The deadlocks

will be re-activated the next time the ignition is

switched on.

3602415d

When it is dark

Approach lighting

Carry out the following when you approach

the car:

· Press the yellow button on the remote

control.

The interior lighting, parking lamps, number-

plate lighting and lamps in the door mirrors

now light (certain models).

* Certain countries

Child safety lock, Service locking

Control for child safety lock - left-hand rear

door.

Child safety lock controls - right-hand rear

door.

WARNING!

Remember that in the event of an

accident, rear seat passengers cannot

open the rear doors from the inside if the

child safety locks are activated.

Therefore, keep the doors unlocked

while driving! In the event of an

accident, rescue personnel will then be

able to enter the car from the outside

Mechanical child safety locks -

rear doors

The controls for the child safety locks are in

the rear edge of each rear door and are only

accessible when the door is open. Use a flat

metal object, such as a screwdriver, to turn the

control and thus activate or deactivate the child

safety lock.

A.Child-safe position - the doors cannot be

opened from inside; turn outwards.

B. Not child-safe position - the doors can be

opened from inside; turn inwards.

Service locking*, boot lid

This function is beneficial if the car is left for

service, with a hotel parking valet or the like.

The service key is left with the staff, who can

open and drive the car but do not have access to

the boot lid (or the glovebox if it is locked with

the master key).

To activate service locking:

· Turn the master key to position II.

· Press the button. An LED in the button

lights when the function is activated and a

message is shown on the display.

To deactivate service locking:

· Turn the master key to position II and

press the button again.

* Certain countries

8302518

Alarm

The alarm system (option)

When the alarm is connected, it continually monitors all alarm points. The

alarm is triggered if:

· the bonnet is opened.

· the boot lid is opened.

· a side door is opened.

· the ignition switch is turned with a non-approved key or subjected to

force.

· a movement is detected in the passenger compartment (if a movement

detector is installed - extra equipment).

· the car is lifted or towed away (if it is equipped with a tilt detector -

extra equipment).

· the battery cable is disconnected.

· anyone tries to disconnect the siren.

Activating the alarm

Press the LOCK button on the remote control. A long flash signal from

the car’s direction indicators confirms that the alarm is active and that all

doors are closed. In certain markets the key or the switch in the driver’s

door can be used to alarm the car.

Automatic arming of the alarm

In certain countries (Belgium, Israel etc.) the alarm is automatically armed

after a slight delay if the driver’s door is opened and closed but the car is

not locked.

Deactivating the alarm

Press the UNLOCK button on the remote control. Two short flash

signals from the direction indicators of the car confirm that the alarm is

deactivated. In certain markets, the key can be used to deactivate the

alarm.

Deactivating a triggered alarm

Press the UNLOCK button on the remote control if the alarm sounds and

you wish to deactivate it. Two short flashes of the direction indicators are

given as confirmation.

Alarm signals

The audio signal is given from a siren with a reserve battery. Each alarm

signal lasts 25 seconds.

If the alarm is triggered, all direction indicators flash for 5 minutes or until

you deactivate the alarm as described above.

Automatic alarm reset

If neither the side doors or rear door are opened within two minutes of

the alarm being disarmed, and the car is unlocked with the remote

control, the car automatically rearms the alarm. The car is simultaneously

locked. This function prevents you from accidentally leaving the car

unalarmed.

Alarm

Status indicator lamp on the dashboard

An indicator lamp (LED) at the top of the dashboard gives a description of

the alarm system status:

· Lamp not lit: Alarm is deactivated.

· Lamp flashes once every 2 seconds: alarm is armed.

· Lamp flashes quickly, after deactivating the alarm and until the ignition

is switched on: The alarm has been triggered.

· If a fault has occurred in the alarm system, a message is shown in

the display with instructions for appropriate measures.

IMPORTANT!

Do not attempt to repair or modify alarm system components. All such

attempts can affect terms of insurance.

3602415d

Temporary deactivation of detectors

To avoid triggering the alarm inadvertently, for example when leaving

a dog in the car or during a ferry crossing, the movement and tilt detectors

can be temporarily deactivated. The button can be pressed at any time

between the key being turned from position II to the car being locked, or

as long as the power to the centre console is on. The LED in the button

lights until you lock the car with your key or remote control.

A message is displayed as long as the key remains in the ignition lock.

The detectors will be reactivated the next time you switch on the ignition.

If your car is equipped with deadlocks, these will be simultaneously

activated. See page 81.

Testing the alarm system

Testing the movement detector for the passenger compartment:

1. Open all windows.

2. Activate the alarm. Alarm activation is confirmed by the LED flashing

slowly.

3. Wait 30 seconds.

4. Test the movement detector in the passenger compartment by lifting a

bag or similar from the seat. The alarm should now sound and flash.

5. Deactivate the alarm by unlocking with the remote control.

Testing the doors:

1. Activate the alarm.

2. Wait 30 seconds.

3. Unlock with the key on the driver’s side.

4. Open one of the doors. The alarm should now be triggered.

5. Repeat the test for the other door.

6. Deactivate the alarm by unlocking with the remote control.

Testing the bonnet:

1. Get into the car and deactivate the movement detector as described on

page 80.

2. Deactivate the alarm (remain in the car and lock the doors with the

button on the remote control).

3. Wait 30 seconds.

4. Open the bonnet with the handle under the dashboard. The alarm

should now sound and flash.

5. Deactivate the alarm by unlocking with the remote control.

Testing the boot lid:

1. Activate the alarm.

2. Wait 30 seconds.

3. Unlock with the key on the driver’s side.

4. Open the boot lid. The alarm should now sound and flash.

5. Deactivate the alarm by unlocking with the remote control.

If the alarm system does not work correctly, have the car examined by an

authorised Volvo workshop.

Alarm

Starting and driving

Starting the engine 88

Economical driving 89

Manual gearbox 91

Automatic gearbox 92

All-Wheel Drive (AWD) 94

Active chassis FOUR-C 95

Parking assistance 96

Towing 98

Jumpstarting 99

Driving with trailer 100

Towing bracket 102

Detachable towbar

104

Loading 106

Adjusting headlamp pattern 107

Brake system/ABS/EBD

110

Stability system 112

BLIS (Blind Spot Information System) 113

Starting the engine

Refuelling

The fuel cap is inside the fuel filler flap on the

right rear wing.

In high exterior temperatures there can be

overpressure in the fuel tank. Open the filler cap

slowly.

Do not overfill the fuel tank. A maximum of

one automatic cut out by the fuel pump

nozzle is recommended! Too much fuel at high

outside temperatures can cause the tank to

overflow!

After refuelling, replace the fuel cap and turn

until one or more clicks is heard.

Opening fuel tank

The fuel filler flap is unlocked and can be

opened when the car is unlocked.

2302129d

NOTE! When the car is locked from outside,

the fuel filler flap remains unlocked for a

further 10 minutes.

Start the engine as follows

(Petrol)

1 Apply the parking brake (handbrake).

2 Automatic gearbox: Gear selector in P or

N position.

Manual gearbox: Gear lever in neutral

and the clutch pedal completely depressed.

This is especially important in severe cold.

3 Turn the ignition key to the start position. If

the engine does not start within 5-10 seconds,

release the key and try again.

Refuelling

NOTE! Never add cleaning additives yourself

unless specifically recommended to do so by a

Volvo workshop.

Important!

Petrol-powered cars must always be refuelled

with unleaded petrol so as not to damage the

catalytic converter.

WARNING!

Always switch off your mobile telephone

during refuelling - the ring signal can cause

sparks which may ignite petrol fumes and

lead to fires or personal injury.

Start the engine as follows

(Diesel)

1 Apply the parking brake (handbrake).

2 Automatic gearbox: Gear selector in P or

N position.

Manual gearbox: Gear lever in neutral

and the clutch pedal completely depressed.

This is especially important in severe cold.

3 Turn the ignition key to the driving position.

A control symbol in the combined instru-

ment panel shows that the engine is pre-

heating. Turn the key to the start position

when the indicator symbol has gone out.

Refuelling with diesel oil

At low temperatures (–5 °C to –40 °C) the

diesel oil can precipitate paraffin, which makes

the engine difficult to start. Make sure that

special winter fuel is used during the cold

period of the year.

NOTE! Depending on the engine temperature

when starting, the idling speed with a cold start is

- for a short period - higher than normal for some

engine types.

The reason for this is Volvo's ambition to

minimise exhaust emissions by bringing up the

engine's exhaust purification system to its correct

working temperature as quick as possible.

Economical driving

Drive with anticipation

Economical driving results from driving gently

with anticipation and adapting your driving

style and speed to the situation.

Keep in mind the following:

· Drive the engine to operating temperature as

soon as possible! That is to say: do not let

the engine idle, but drive with a light load as

soon as you can.

· A cold engine consumes more fuel than a

warm one.

· Avoid driving short distances where the

engine never has time to reach operating

temperature.

· Drive gently! Avoid unnecessary quick

accelerations and heavy braking.

· Do not drive with unnecessary, heavy loads

in the car.

· Do not drive with winter tyres when the

roads are clear and dry.

· Remove the load carrier when it is not in use.

· Do not open side windows unnecessarily.

Your new car - slippery road

surfaces

Driving on a slipper road surface may feel

different depending on whether you have

chosen a car with manual gearbox or automatic

gearbox.

Practice handling skids under controlled

conditions so that you know how your new car

reacts.

Do not overload the battery

The electrical functions in the car load the

battery to varying degrees.

Avoid having the ignition key in position II

when the engine is off.

Use position I instead, as less power is

consumed. The 12-volt socket in the cargo

compartment supplies power even when the

ignition key is removed.

Examples of functions which consume a lot of

power:

· ventilation fan

· windscreen wipers

· audio system

· parking lamps.

Also take note of different accessories that load

the electrical system.

Do not use functions the consume a lot of

current when the engine is switched off.

A text is shown on the display in the combined

instrument panel if battery voltage is low.

The message in the display remains until the

engine has started.

The energy economy function shuts down

certain functions or reduces the load on the

battery, e.g. by lowering ventilation fan speed

and switching off the audio system.

Charge the battery by starting the engine.

Economical driving

Do not allow the engine and

cooling system to overheat

Under certain conditions, e.g. when driving in

hilly terrain and with a heavy load, especially in

warm weather, there is a risk of the engine and

cooling system overheating.

To prevent the cooling system from

overheating:

· Drive at low speeds if driving with a trailer

up a long incline.

· Switch off the air conditioning temporarily.

· Avoid letting the engine idle.

· Do not turn the engine off immediately you

stop, if the car has been driven hard.

· Remove any auxiliary lamps from in front

of the grille if driving in extremely high

temperatures.

To prevent the engine from overheating:

Do not exceed engine speeds of 4500 rpm

(diesel engine: 3500 rpm) if driving with a

trailer or caravan in hilly terrain. The oil

temperature can become too high.

Automatic gearbox

Adaptive system

The gearbox is controlled by what is known as

an adaptive system. The system continually

monitors how the gearbox is behaving

senses every gear change for optimum shift

quality.

Lock-up function

The gears have a lock-up function (locked

gears), which gives better engine braking and

lower fuel consumption.

Safety systems

Cars with automatic gearbox have special safety

systems:

Keylock

To remove the ignition key, the gear selector

must be in the P position.

The key is locked in all other positions.

Park position (P)

Stationary car with engine running:

Hold your foot on the brake pedal when

moving the gear selector to another position.

Shiftlock

Park position (P)

The brake pedal must be depressed to move the

gear selector from position P to other gear

positions when the ignition key is in position I

or II.

Neutral position (N position)

The brake pedal must be depressed to move the

gear selector from position N to other gear

positions when the ignition key is in position I

or II.

Cold start

When starting in cold temperatures, gear shifts

may feel harder.

This is due to the viscosity of the transmission

fluid at low temperatures.

To minimise engine emissions, the gearbox

shifts up later than normal if the engine has

been started at low temperatures.

When the engine is cold, the gearbox shifts

gears at higher revs.

This allows the catalytic converter to reach

normal operating temperature more quickly.

Kick-down

When the accelerator is pressed all the way to

the floor, beyond the position normally

regarded as full acceleration, a lower gear is

immediately engaged. This is known as kick-

down.

When maximum speed for this gear is reached,

or if the accelerator is released from the kick-

down position, the gearbox automatically

changes up.

Kick-down is used when maximum accelera-

tion is needed, such as for overtaking.

To prevent over-revving, the gearbox control

program has a protective downshift inhibitor.

The kick-down function cannot be used in

the manual* positions. Return to automatic

position D.

* Refers to Geartronic.

Manual gearbox

Gear positions, 5-speed

Depress the clutch pedal fully with each gear

change. Remove your foot from the clutch

pedal between gear changes! Follow the

appropriate shifting pattern.

For the best possible fuel economy, use the

highest gear possible as often as possible.

4302395n

M56

Reverse gear inhibitor

Only engage reverse gear when the car is

stationary.

To put the car in reverse, the gear lever must

first be moved to neutral (between 3rd and 4th

gear). Thus, reverse cannot be directly selected

from 5th gear due to the reverse gear inhibitor.

4301589e

M56

Automatic gearbox

Gear selector positions

parking brake when the car is stationary with

the gear lever in N.

D  Driving position

D is the normal driving position. The car

automatically shifts between the different

gearbox gears based on the level of acceleration

and speed. The car should be stationary when

selecting D from position R.

4  Low gear

Shifting up and down between the 1st, 2nd, 3rd,

and 4th occurs automatically.

The 5th gear will not be engaged.

Position 4 can be used:

· for mountain driving

· when driving with a trailer

· to increase engine braking

3  Low gear

Shifting up and down between 1st, 2nd and

3rd occurs automatically.

The 4th gear will not be engaged.

Position 3 can be used:

· for mountain driving

· when driving with a trailer

· to increase engine braking

L  Low gear position

Select L if you wish to drive in 1st or 2nd.

Position L gives the best engine braking for

mountain driving, etc.

P  Parking

Select this position when you wish to start the

engine or park the car.

The car should be stationary when you

select P!

In the P position the gearbox is mechanically

locked. Always apply the parking brake when

parking!

R  Reversing position

The car should be stationary when you

select R!

N  Neutral position

N is the neutral position. The engine can be

started, but no gear is selected. Apply the

W  Winter

The W button by the gear

selector engages and

disengages the winter

programme W. The

symbol W is shown in the

combined instrument panel

when the winter program-

me is activated. The Winter programme starts

the gearbox in 3rd gear to make it easier to pull

off on slippery roads. When the programme is

engaged, lower gears are activated only by kick-

down. The W programme can only be selected

in position D.

Automatic gearbox

Mechanical gear selector inhibitor

The gear selector can be moved freely between

N and D. Other positions are locked with a latch

that is released with the inhibitor button on the

gear selector.

Press the inhibitor button to move the lever

forward or back between the different gear

positions.

4302106d

4301647d

Manual positions, Geartronic

Move the gear selector to the right to shift from

automatic driving position D to manual mode.

To shift from the MAN position to automatic

driving position D, move the gear selector left

to position D.

3rd gear is the highest gear that can be used

when starting.

While driving

Gear selector, automatic gearbox Geartronic Gear selector, Geartronic

4302476e

The manual gearshift mode can be selected at

any time while driving. The engaged gear is

locked until you choose another gear. The car

will only shift down automatically if you slow

down to a very low speed.

If the gear selector is moved to - (minus) the car

changes down a gear and engine brakes at the

same time. If the gear selector is moved

to + (plus) the car changes up a gear.

The kick-down function cannot be used in

manual mode.

All Wheel Drive

All-Wheel Drive (AWD) (option)

All-wheel drive is always engaged.

All-wheel drive means that the vehicle is driven

by all four wheels at the same time.

The power is distributed automatically between

the front and rear wheels.

An electronically-controlled clutch system

distributes the power to the pair of wheels

which have the best grip in the road conditions.

This is to get the best possible grip and to avoid

wheelspin.

Under normal driving conditions, the majority

of power is transmitted to the front wheels.

The greater traction improves driving safety in

rain, snow and icy conditions.

Speed-dependent power

steering (option)

If the car is equipped with speed-dependent

power steering it is more easily steered at low

speeds to facilitate parking or the like.

When speed is increased, steering force is

adapted to provide the driver increased road

sensitivity.

Do not drive with an open boot

lid!

If you drive with the boot lid open, some of the

exhaust gases and poisonous carbon monoxide

can be sucked into the car through the cargo

compartment. If you must drive a short distance

with the boot lid open, do as follows:

· Close all windows.

· Distribute the air between the windscreen

and floor and while running the fan at high

speed.

Active chassis FOUR-C

(option)

The car is equipped with an extremely advanced

active chassis system - Continuously Control-

led Chassis Concept - that is regulated electro-

nically.

The FOUR-C control unit analyses data from

the sensors and performs the necessary shock

absorber setting adjustments up to 500 times

per second. This results in extremely fast and

accurate individual shock absorber control,

which contributes to variations in chassis

characteristics.

Chassis characteristics can be modified at any

time while driving, when the nature of the road

changes or when you desire a change in driving

style. This change occurs in a matter of

milliseconds.The effect produced by pressing

the accelerator is linked to your choice of

chassis characteristics.

Comfort

Comfort mode adjusts the

chassis setting so that the

body is insulated from

uneven sections of the road

surface, which allows for

better glide. Shock absorption

is softer and body movements are minimal.

This setting is recommended for long-distance

driving or driving on slippery road surfaces.

If the chassis is in Comfort mode when the

ignition is switched off, it will resume this

mode the next time it is started.

Sport

In Sport mode, steering responses are quicker

than in Comfort mode. Damping is harder and

the body follows the road surface to minimise

rolling during quick cornering. The car feels

sportier. If the chassis is in Sport mode when

the ignition is switched off, it will resume this

mode the next time it is started.

3603554m

Parking assistance

3603495m

3602947r

Parking assistance, front and rear

General

Parking assistance is used as an aid to parking.

A signal indicates the distance to an object.

The frequency of the signal increases a you

come closer to an object in front of or behind

the car. The tone becomes constant at a distance

of about 30 cm. If there are objects within this

distance both behind and in front of

the car, the

signal alternates between front and rear

speakers.

If the volume of another sound source from the

audio system is high, this is automatically

lowered.

The system is always activated when the car is

started.

*Provided that parking assistance is mounted

both front and rear.

WARNING!

Parking assistance does not relinquish the

driver’s own responsibility during parking.

The sensors have blind spots where objects

cannot be detected.

Be aware of children and animals near the car.

Front parking assistance

The measurement area straight in front of the

car is approx. 0.8 m.

The text message PARK ASSIST ACTIVE

appears in the audio display when the sensors

react to an obstacle in front of the car.

Auxiliary lamps cannot be installed together

with parking assistance because the sensors

will react to the auxiliary lamps.

Rear parking assistance

The measurement area straight behind the car is

approx. 1.5 m.

The text message PARK ASSIST ACTIVE

appears in the audio display when reverse gear

is engaged.

The system must be deactivated when driving

with a trailer, bike carrier on the towbar or the

like as this would trigger the sensors.

Rear parking assistance is deactivated automati-

cally when towing a trailer if a Volvo genuine

trailer cable is used.

Deactivating and reactivating parking

assistance

Parking assistance can be deactivated with the

button in the switch panel. The LED in the

switch goes out. Parking assistance is reacti-

vated when the switch is turned on and the

LED illuminates.

Front parking assistance

Front parking assistance is active at speeds of

below 15 km/h, even when reversing.

The signal comes from the front speakers.

3603503m

Parking assistance

Parking assistance sensors

Cleaning the sensors

The sensors must be cleaned regularly in order

for them to function properly. Clean them with

water and car shampoo.

The sensors may react if covered by ice and

snow.

Rear parking assistance

Rear parking assistance is activated when

reverse gear is engaged.

The signal comes from the rear speakers.

Fault indicator

The information symbol

shines with a steady glow

PARK ASSIST SERVICE

REQUIRED is shown in the

information display in the

centre of the combined

instrument panel together with

the symbol.

Towing

Towing eye, front Towing eye, rear

If you need to be towed

· Unlock the steering wheel lock so that the

car can be steered.

· Keep in mind the highest permitted legal

towing speed.

· Remember that the brake and power

steering servos do not function when the

engine is switched off! You must exert

approximately five times more pressure on

the brake pedal and steering is considerably

harder than usual.

· Drive gently. Keep the towline taut to avoid

unnecessary jerking.

Bump starting (tow starting)

the engine

If you bump start (tow start) a car with manual

gearbox, the catalytic converter may be

damaged. Cars with automatic gearbox cannot

be bump started (tow started). Use a booster

battery if the battery is flat.

Towing eye

The towing eye is located in the tool kit in the

cargo compartment. You must screw the towing

eye into place before towing. The sockets and

covers for the towing eye are located on the

right-hand side of each bumper.

Remove the cover as follows:

A. Loosen the bottom edge of the cover with a

coin.

B. Screw the towing eye securely into place up

to the flange (C). You can use a wheelbrace.

After use, unscrew the towing eye and refit the

cover.

Towing

NOTE! The towing eye may only be used for

towing on the road, not for salvage after driving

into a ditch or similar. Professional help should

be called for salvage towing.

8600307e

For automatic gearboxes

· The gear selector should be in position N.

· Maximum permitted speed for cars with an

automatic gearbox: 80 km/h (50 mph).

Maximum permitted distance: 80 km

(50 miles).

· Cars equipped with an automatic gearbox

must only be towed face forward.

· The engine cannot be towed to start (bump

started). See “Jumpstarting” on the next page.

Jumpstarting

Jumpstarting with a booster battery is as

follows:

If for some reason the battery in your car is discharged, you can “borrow”

current from a spare battery or another car’s battery to start the engine.

Always check that the clamps are secure so that there are no sparks

during the start attempt.

To avoid the risk of explosion, we recommend you do exactly as follows.

· Turn the ignition key to position 0.

· Ensure that the booster battery has 12 volt current.

· If the booster battery is in another car, stop the engine of that car and

make sure the cars are not touching.

· Connect the red cable to the booster battery’s positive terminal

(1+ in the illustration) and the connection in your cars engine

compartment (2+ in the illustration).

The clamp should be attached to the contact point located under a little

black cover with a plus sign on it. The cover is connected to the cover

of the fuse box.

3100088m

WARNING!

Remember that batteries, especially the booster battery, contain

oxyhydrogen which is highly explosive. A spark, which can be caused

if you incorrectly install the jump leads, is enough to cause the battery

to explode and both damage the car and injure you. The battery also

contains sulphuric acid, which can cause serious corrosive damage. If

the acid comes into contact with your eyes, skin or clothes, flush with

large quantities of water. If acid splashes into your eyes contact a

doctor immediately.

· Connect one end of the black cable to the booster battery’s negative

terminal (3– in the illustration).

· Connect the other end of the black cable to a grounding point on your

car (4– in the illustration).

· Start the engine of the “booster car”. Let the engine run a few minutes

at a speed slightly higher than idle, 1500 rpm.

· Start the engine of the car with the discharged battery.

· NOTE! Do not move the clamps during the start attempt (risk

of spark buildup).

· Remove the clamps in reverse order.

NOTE! If you need to help another car, connect the red cable as shown in

the illustration above. Connect the black cable between two grounding

points as also shown in the illustration. Do not connect the black cable

to the negative pole of another battery!

100

* Does not apply to ball hitch with vibration damper.

Driving with trailer

· The towing bracket on the car must be of an approved type. Your

Volvo dealer can advise you as to which towing bracket to use.

· Distribute the load in the trailer so that the weight on the towing

bracket is approximately 50 kg for trailer weights under 1200 kg and

approximately 75 kg for trailer weights over 1200 kg.

· Increase tyre pressure to correspond to the pressure for full load. See

the tyre pressure table!

· Clean the towing bracket regularly and grease the towball* and all

moving parts to prevent unnecessary wear.

· Do not drive with a heavy trailer when your car is brand new! Wait

until it has gone at least 1000 km (620 miles).

· The brakes are loaded much more than usual on long and steep

downhill slopes. Downshift to a lower gear and adjust your speed.

· If the car is driven with a heavy load in a hot climate, the engine and

gearbox may overheat. The temperature gauge in the combined

instrument panel goes into the red zone when the car overheats. Stop

and let the engine idle a few minutes.

· If the car overheats, the air conditioning system can be temporarily

switched off.

· The gearbox reacts with a built-in protection function if the car

overheats. See the message in the display!

· The engine is loaded more heavily than usual when driving with a

trailer.

· For reasons of safety, you should not drive faster than 80 km/h

(50 mph), even if the laws of certain countries permit higher speeds.

· The highest permissible trailer weight for a trailer without brakes is

750 kg.

· If you park with a trailer, always move the gear selector to the P

position (automatic transmission), or engage a gear (manual gearbox).

If you park on steep hills always put chocks under the wheels.

Driving with trailer

· Avoid driving with trailer weights above 1200 kg on inclines great

than 12%. You should not drive with a trailer on inclines above 15%.

Driving with trailer - automatic transmission

· When parking on a slope you should apply the parking brake before

moving the gear selector to the P position. When starting on a slope

you should first move the gear selector to the driving position and then

release the parking brake.

· Select an appropriate low gear position on the gearbox when driving

on steep slopes or if driving slowly. In doing so, you prevent the

gearbox from changing up if you have an automatic transmission. The

gearbox oil will be cooler.

· If you have a Geartronic transmission, do not use a higher manual gear

than what the engine can "handle". It is not always economical to drive

in high gears.

NOTE! Some models must be fitted with an oil cooler for the automatic

transmission when driving with a trailer. You should therefore check with

your closest Volvo dealer about just your car if a towbar has been fitted at

a later date.

101

0300171d

Driving with trailer

Level control

If your car is equipped with automatic level control, the rear end will

always have the right height while driving irrespective of the load. The

rear end drops when the car is at a standstill, which is quite normal. When

starting with a load, the level is pumped up after a certain distance.

The highest permitted trailer weight Recommended

for a trailer with brakes ball pressure

0-1200 kg.................................................... 50 kg

1201-1600 kg.............................................. 75 kg

1601-1800 kg.............................................. 75 kg

NOTE! The maximum permitted trailer weights stated are the ones

that the Volvo Car Corporation allows. Remember that national

vehicle regulations may further limit the trailer weight and speed.

The towbars can be certified for higher towing weights than what

the car may tow.

WARNING!

If you do not follow the given recommendations, the trailer and car

may be difficult to control during evasive manoeuvres and braking,

which can be dangerous to you and others on the road.

102

WARNING!

If your car is fitted with Volvo's detachable

towbar: Make sure that the towbar is locked

before you drive off.

· The red signal pin (see the arrow in the

illustration to the left) should not be visible!

· Use the key to lock it.

See the description on page 104.

Fixed towbar (A)

Always remember to fasten the trailer's safety

cable to the attachment. See the illustration.

Detachable towbar (B)

Always follow installation instructions

carefully.

Always remember to fasten the trailer's safety

cable to the attachment. See the illustration.

Always remember to clean and grease the

connector pin regularly. Use the recommen-

ded grease 8624203.

NOTE! Your car may have a towing bracket

with a 13-pin electrical connector, which you

need to connect to a trailer with a 7-pin

electrical connector. If this is the case, use only

an original Volvo Genuine adapter cable.

Ensure that the cable does not drag on the

ground.

3701780d

8901313d

Towing bracket

103

8902082d

Towing bracket

Distance A above:

Fixed: 1152 mm

Detachable: 1152 mm

Max. ball pressure: 75 kg

8902083d

Distance B above:

Fixed: 65 mm

Detachable: 65 mm

104

Remove the connector pin cover.

Detachable towbar - mounting the ball section

Hold the towball and turn the lever clockwise

to the locked position. Release the lever.

Grasp the towbar.

Push the part with the ball in until it locks.

NOTE! The lever changes position quickly.

Check that the signal pin (B) is pushed in.

Turn the key anticlockwise to the locked

position and remove it from the lock.

8902079M

OPEN

8902078M

LOCKED

8902076M

RED PIN (B)

NOT VISIBLE!

8902076M

PUSH

LOCK

8902075M

OPEN

8902074M

Insert the key and turn it clockwise to the

unlocked position.

105

Detachable towbar - removing the ball section

Insert the key into the detachable part and turn

it clockwise to the unlocked position.

Turn the lever clockwise to the locked position

and grip the towball.

Grasp the towbar. Pull the towball section from

the connector pin. Do not hold the lever.

IMPORTANT!

The lock on the towball can only be locked

when the red plastic pin is not visible

OPEN

8902078M

OPEN

8902074M

8902081M

Turn the key anticlockwise to the locked

position and remove it from the lock.

Refit the connector pin cover as in

the illustration.

LOCKED

8902077M

8902080M

106

Load carrier attachment points

General

Load capacity is affected by extra accessories

mounted on the car, such as a towbar, the load

on the towball (75 kg with trailer hitched), load

carriers and roof box, as well as the passengers’

combined weight. The load capacity of the car

is reduced by the number of passengers and

their weight.

WARNING!

The car’s driving characteristics change

depending on how heavily it is loaded and

how the load is distributed.

Fitting the load carrier

1. Make sure the load carrier is placed in the

right direction (see the marking on the decal

under the cover).

2. Fit the guide pins into the guide holes (1).

3. Carefully lower the bracket on the other side

to the roof.

4. Screw the knob up a bit.

Press the knob against the roof bracket and

catch the hook in the roof bracket under

the roof rail.

5. Screw the load carrier in place.

6. Fit the guide pins of the other brackets into

the guide holes.

7. Screw the load carrier in place.

8. Check that the hook is properly secured in

the roof bracket.

9. Tighten the knobs alternately until the

carrier feels secure.

10. Refit the cover.

11. Check the knobs regularly to see that

they are properly tightened.

If using load carriers

· To avoid damaging your car and to achieve

the best level of safety when driving, we

recommend that you only use load carriers

that Volvo has specially designed for your car.

· Check periodically that the load carriers

and load are properly secured. Lash the

load securely with retaining straps!

· Distribute the load evenly over the load

carriers. Do not load lopsidedly! Place the

heaviest items at the bottom.

· Keep in mind that the car’s wind resistance

and fuel consumption increase in proportion

to the size of the load.

· Drive gently. Avoid quick accelerations,

heavy braking and taking curves hard.

WARNING!

Load no more than 100 kg on the roof,

inclusive of the load carriers or roof box.

The car’s centre of gravity and driving

characteristics are altered by roof loads.

Floor mats

Volvo offers custom made floor mats for your

car. They must be properly placed and secured

in the mat clips so that they do not become

entangled in the pedals at the driver’s seat or get

caught at other seats.

8902060

107

3501716j

A. Headlamp pattern for left-hand traffic

B. Right-hand traffic

Correct light pattern for left or

right-hand traffic

So as not to dazzle oncoming drivers, the

headlamp beam pattern can be altered by

masking the headlamps. The quality of the

beam pattern may not be as good.

Headlamp masking

Copy the templates, which are reversed for

RHD variants, and transfer the pattern to a self-

adhesive, waterproof material such as opaque

tape or similar. The mask is positioned using

the rectangle in the headlamp lens. The

reference measurements (X, Y) are for obtain-

ing the distance from the rectangle to the corner

of the mask. After copying the templates, check

the measurements so that the reference measu-

rements cover enough of the beam pattern.

3501842m

3501841m

Fitting the mask to the headlamps. The upper illustration is for halogen headlamps and the lower

illustration is for Bi-Xenon headlamps.

Reference measurements for halogen

headlamps:

Template 1. (1) = 21 mm, (2) = 46 mm

Reference measurements to the rectangle in the

headlamp lens: (3) = 158 mm, (4) = 39 mm.

Template 2. (5) = 70 mm, (6) = 27 mm

Reference measurements to the rectangle in the

headlamp lens: (7) = 22 mm, (8) = 39 mm.

Reference measurements for Bi-Xenon

headlamps:

Template 3. (1) = 93 mm, (2) = 37 mm

Reference measurements to the rectangle in the

headlamp lens: (3) = 84 mm, (4) = 47 mm.

Template 4. (5) = 101 mm, (6) = 37 mm

Reference measurements to the rectangle in the

headlamp lens: (7) = 2 mm, (8) = 2 mm.

Adjusting headlamp pattern

108

Adjusting headlamp pattern

Masking templates for halogen headlamps

3501843

The templates are for LHD variants, and are reversed for RHD variants.

Template 1 is fitted to the left-hand headlamp for LHD variants and on the right-hand

headlamp for RHD variants.

Template 2 is fitted to the right-hand headlamp for LHD variants and on the left-hand

headlamp for RHD variants.

Copy templates 1 and 2. Check the measurements to ensure they are correct. Reverse the

templates for RHD variants. Transfer the template to a self-adhesive, waterproof material

and cut it out.

109

Adjusting headlamp pattern

Masking templates for Bi-Xenon headlamps

3501844m

The templates are for LHD variants, and are reversed for RHD variants.

Template 3 is fitted to the left-hand headlamp for LHD variants and on the right-hand headlamp for RHD variants.

Template 4 is fitted to the right-hand headlamp for LHD variants and on the left-hand headlamp for RHD variants.

Copy templates 3 and 4. Check the measurements to ensure they are correct. Reverse the templates for RHD variants. Transfer the template to a self-

adhesive, waterproof material and cut it out.

110

Brake system/ABS/EBD

If a brake circuit fails

If a fault should occur in one of the

circuits it is still possible to stop the car. Press

the pedal hard once - not repeatedly. The brake

pedal can be depressed further and feels a little

softer than usual. If also requires more pressure

on the pedal to achieve a normal braking effect.

The brake servo only works when the

engine is running

If the car is rolling or being towed with the

engine switched off you must apply approxima-

tely five times more pressure on the brake pedal

than when the engine is running.

The brake pedal feels rigid and hard.

Moisture on the brake discs and brake

lining alter braking characteristics!

The brake components become wet when the

car is driven in heavy rain, through pools of

water, or when the car is washed. This alters

brake pad friction characteristics so that there is

a delay before braking effect is noticed. Depress

the brake pedal lightly from time to time when

driving long distances in rain or slush or before

parking the car in such conditions. The brake

pads are thus able to warm up and dry out. You

should also do this when driving after washing

the car or when starting in very damp or cold

weather conditions.

If the brakes are heavily loaded

When driving in the Alps or other roads with

similar characteristics, the brakes are heavily

loaded even if you are not pressing the pedal

particularly hard. Because the speed is often

low the brakes are not cooled as effectively as

when driving on flat roads.

So as not to overload the brakes shift down

and use the same gear both uphill and downhill

instead of using the brake (manual transmis-

sion). In this way engine braking is used more

effectively and the brake is only required for

short periods.

Keep in mind that the brakes are even more

heavily loaded when driving with a trailer.

ABS - Anti-lock brakes

The ABS system (Anti-lock Braking System) is

designed so that the wheels do not lock when

braking. This retains the best possible steering

response when braking. This improves your

ability to swerve to avoid obstacles. The ABS

system does not increase your total braking

capacity. However, as the driver you have

increased ability to steer and thus better control

over the car, which in turn increases safety.

After the engine has started and reached a speed

of about 20 km/h (12 mph), a short self-test can

be both heard and felt. When the ABS system

functions, you can hear and feel pulses in the

brake pedal. This is completely normal.

NOTE! You must depress the brake pedal fully

to take maximum advantage of the ABS system.

Do not release the pedal when the ABS pulses

are felt and heard. Practice braking with the

ABS system in a suitable place.

The ABS symbol is lit and shines with a

constant glow:

· For approximately two seconds when you

start the car to test the system.

· If the ABS system has shut down due to a

fault.

111

Brake system/ABS/EBD

WARNING!

If both the BRAKE and ABS war-

ning symbols are lit, there is a risk that the

rear end will have a tendency to slide during

heavy braking.

If the level in the brake fluid reservoir is nor-

mal, drive carefully to the nearest authorised

Volvo workshop to have the brake system

checked.

If the level of brake fluid in the reservoir is below

the MIN mark, the car should not be driven until

the brake fluid has been topped up.

The reason for the loss of brake fluid must

be investigated.

Electronic Brakeforce

Distribution (EBD)

The EBD system (Electronic Brakeforce

Distribution) is an integrated part of the ABS

system. The EBD system controls the brake

force to the rear wheels so that the best possible

braking force is always available. Pulses in the

brake pedal can be felt and heard as the system

controls the brake force.

Emergency Brake Assistance (EBA)

The Emergency Brake Assistance function is

integrated in the DSTC system.

The system is designed to provide maximum

brake force immediately whenever rapid

braking is necessary. The system detects the

need for heavier braking by registering how

quickly the brake pedal is applied.

The EBA function is active at all speeds. For

safety reasons, it cannot be switched off.

When the EBA function is activated, the brake

pedal sinks while maximum braking force is

applied.

Continue braking without releasing the brake

pedal.

The EBA function disengages when the

pressure on the brake pedal is relieved.

112

Stability system

When the stability system is in action, it may

seem like the car does not respond normally to

acceleration. This is because the system detects

the amount of friction on the road surface and

allows the different stability system functions to

operate.

The car is equipped with either STC (Stability

and Traction Control) or DSTC (Dynamic

Stability and Traction Control).

Function/system STC DSTC*

TC X X

SC X X

AYC X

Traction Control (TC)

The Traction Control function transfers power

from the spinning drive wheel to the drive wheel

which has grip by braking the spinning drive

wheel. To increase forward traction in this

situation, it may be necessary to depress the

accelerator more than usual. A pulsing sound is

heard when Traction Control is working. This is

completely normal. The TC function is most

active at low speeds. It cannot be deactivated.

Spin Control (SC)

The Stability Control function prevents the drive

wheels from slipping during acceleration.

This improves road safety on slippery surfaces.

Under certain conditions, such as when driving

with snow chains or in deep snow or sand, it

may be beneficial to deactivate the SC function

to increase traction. This is done with the

STC/DSTC button.

Active Yaw Control (AYC)

The Active Yaw Control function automatically

brakes one or more wheels to stabilise the car in

the event of a skid. If the brake pedal were to be

depressed in this situation, it would feel more

rigid than usual and a pulsing sound would be

heard.

The AYC function is always active and cannot

be deactivated.

* Option on certain markets

WARNING!

The driving characteristics of the car may

change if the STC or DSTC is reduced. Al-

ways follow normal safety precautions for

cornering and driving on slippery surfaces.

113

BLIS (Blind Spot Information System)

1 - BLIS camera, 2 - Indicator lamp,

3 - BLIS symbol

“Blind spots” covered by BLIS

Distance A = approx. 9.5 m

Distance B = approx. 3 m

The system is designed to work most effective-

ly when driving in dense traffic on multi-lane

highways. BLIS is based on digital camera

technology. The cameras (1) are fitted under the

door mirrors.

When a camera has detected a vehicle inside the

blind spot zone then an indicator lamp is lit in

the door panel (2). The light comes on with a

constant glow to draw the driver’s attention to a

vehicle in the blind spot.

NOTE! The lamp comes on on the side of the

car where the system has detected the vehicle. If

the car is overtaken on both sides at the same

time then both lamps come on.

BLIS

BLIS is an information system which indicates

whether there is another vehicle moving in the

same direction in the so-called ”blind spot”.

WARNING!

BLIS also has an integrated function which

warns the driver if a fault should arise in the

system. If, for example, the system’s cameras

are obscured then the BLIS indicator lamp

flashes and a message is shown in the

dashboard display (see the table on page 115).

In such cases, check and clean the lenses. If

necessary, the system can be switched off

temporarily by pressing the BLIS button (see

page 114).

When BLIS operates

The system operates when the car is driven at a

speed above 10 km/h.

When you overtake another vehicle:

· The system reacts if you overtake another

vehicle at a speed of up to 10 km/h faster

than the other vehicle.

When you are overtaken by another vehicle:

· The system reacts if you are overtaken by a

vehicle travelling up to 70 km/h faster than

you are travelling.

WARNING!

· BLIS does not work in sharp bends.

· BLIS does not work when the car is

reversing.

· A wide trailer coupled to the car can

conceal other vehicles in adjacent lanes. It

can prevent the vehicle in the screened area

from being detected by BLIS.

3603686j

3603683r

The system is a supplement to, and not a

replacement for, the existing rearview

mirrors. It can never replace the awareness

and responsibility of the driver. The

responsibility for changing lanes safely rests

with the driver.

114

BLIS (Blind Spot Information System)

System function in daylight and

darkness

Daylight

In daylight the system reacts to the shape of the

surrounding vehicles. The system is designed

to detect motor vehicles such as cars, trucks,

buses and motorcycles

Darkness

In darkness the system reacts to the headlamps

of surrounding vehicles. If its headlamps are

not switched on then the system does not detect

the vehicle. This means for example that the

system does not react to a trailer without

headlamps which is towed behind a car or

truck.

Cleaning

In order to work most effectively the BLIS

camera lenses must be clean. The lenses can be

cleaned with a soft cloth or damp sponge. Clean

the lenses carefully so that they are not

scratched.

Important!

WARNING!

· The system does not react to bicycles or

mopeds.

· The BLIS cameras can be disrupted by

intensive light or when driving in the dark

when there are no light sources (e.g. street

lighting or other vehicles). The system may

then interpret the lack of light as if the

cameras have been blocked.

In both cases a message is shown in the

dashboard display.

When driving in such conditions the

system can be temporarily switched off

(see the information to the right).

When the text message has faded the

system returns to full functionality.

· The BLIS cameras have the same limita-

tions as the human eye, i.e. they ”see”

worse in heavy snowfall or thick fog for

example.

Deactivating and reactivating BLIS

· BLIS is activated automatically each time

the ignition is switched on. The indicator

lamps in the door panels flash three times

when the ignition is switched on.

· The system can be switched off by pressing

the BLIS button in the switch panel in the

centre console (see illustration above). The

LED in the button goes out when the

system is switched off and a text message is

shown in the dashboard display.

· BLIS can be reactivated by pressing the

button. An LED in the button then lights, a

new text message is shown in the display

and the indicator lamps in the door panels

flash three times. Press the READ button,

see page 37, to clear the text message.

3603682r

The lenses are electrically heated to melt ice

or snow. If necessary, brush snow away

from the lenses.

115

System status

BLIS system on

BLIS function

reduced

BLIS system messages

The messages above are only shown if the

ignition key is in position II (or if the engine is

running) and BLIS is active (i.e. if the driver

has not switched off the system).

BLIS (Blind Spot Information System)

BLIS system not

functioning

Right-hand

camera blocked

Left-hand camera

blocked

Both cameras

blocked

BLIS system off

Text in the display

BLIND-SPOT SYST

SERVICE REQUIRED

BLIND-SPOT SYST R

CAMERA BLOCKED

BLIND-SPOT SYST L

CAMERA BLOCKED

BLIND-SPOT SYST

CAMERAS BLOCKED

BLIND-SPOT INFO

SYSTEM OFF

BLIND-SPOT INFO

SYSTEM ON

BLIS FUNCTION

REDUCED

116

117

Wheels and tyres

General about wheels and tyres 118

Tyre pressures 120

Wear, Changing the tyres, Spare wheel 121

Changing wheels 122

118

General

New tyres

Bear in mind that tyres are perishable goods - after a

few years they begin to harden while their friction

properties deteriorate little by little. Try to use fresh

tyres when changing.

This is especially important for winter tyres. The week

and year of manufacture is indicated with 4 digits (e.g.

1502 indicates tyres manufactured week 15, 2002).

General wheels and tyres

All tyres have a dimension designation, such as 215/55R16 93W.

These tyre size designations, which are used by all tyre manufacturers,

can be interpreted as follows:

215 section width (mm)

55 relationship between the section height and breadth (%)

R means radial tyre

16 wheel rim diameter in inches (")

93 code digits for maximum permissible tyre load, in this

case 650 kg

W specifies that the tyre is manufactured for speeds up to

270 km/h (167 mph)

Your car is fully approved, which means that you may not deviate from

those dimensions and performance ratings indicated in the vehicle

registration. The only exception from these regulations concerns winter

tyres and studded tyres, which may have different dimensions and a

different speed rating than indicated in the registration. If you select tyres

with different dimensions, do not drive at speeds faster than those

permitted. The most common speed ratings are indicated in the following

table:

Note: maximum permissible speeds indicated.

Q 160 km/h, used most often with studded tyres

T 190 km/h

H 210 km/h

V 240 km/h

W 270 km/h

When you change tyres: be sure to use the same type (radial), dimension,

designation, and brand on all four wheels. Otherwise, there is a risk that

the handling characteristics of the car could change. Check with your

dealer regarding dimensions which are available for your car. Keep in

mind that the road surface can determine how fast you may drive, not the

tyre speed rating.

7700444d

Tyre age

All tyres older than six years should be checked by

an expert even if they seem undamaged. The reason

for this is that tyres age and decompose, even if

they are hardly ever or never used. The function can

therefore be affected due to the tyre’s constituent

materials being broken down, and it should then not

be used.

This also applies to spare tyres, winter tyres and

tyres saved for future use.

Examples of external signs which indicate that the

tyre is unsuitable for use are cracks or discoloura-

tion.

The age of the tyre can be determined by the

marking, see illustration.

119

Winter tyres

We recommend the use of winter tyres, size 195/65 R15 except for cars

with turbo engines. For these cars we recommend tyre size 205/55 R16.

Always use winter tyres on all four wheels!

NOTE! Always consult your Volvo dealer as to which wheel and tyre

type is appropriate for your car.

Studded winter tyres

Studded winter tyres should be run in for 500-1000 kilometres

(300-600 miles), softly and gently so that the studs sit in the tyre correctly.

This extends the service life of both the tyres and the studs while making

the drive a bit quieter. Ensure that the studded tyres have the same

direction of rotation throughout their lifetime. If you wish to shift wheels,

see to it that they remain on the same side as previously.

Please remember: The regulations for using studded tyres vary from

country to country.

Snow chains

Snow chains may only be used on the front wheels. This also applies to

all-wheel drive cars.

Avoid driving on bare surfaces unnecessarily as this generates much wear

on both the snow chains and the tyres.

Locking wheel bolts

Locking wheel bolts can be used on both aluminium and steel rims.

If steel rims with locking wheel bolts are used in combination with wheel

covers then the locking wheel bolts must be fitted furthest from the air

valve. Otherwise the wheel cover cannot be fitted on the rim.

General

Important!

Only Volvo-approved snow chains are permitted. Use of other snow

chains could damage your car.

Never drive faster than 50 km/h when snow chains are fitted!

Never use ”quick links” because the space between the disc brakes

and the wheels is too small.

120

Tyre pressures

WARNING!

The only Volvo approved “special wheel rims” are those tested by Volvo

and are Volvo Genuine accessories.

Driving characteristics and tyres

Tyres affect driving characteristics greatly. Tyre type, size and pressure are

important to how the car performs. When you change tyres, be sure to use

the same type, size and brand on all four wheels. Follow the recommenda-

tions regarding tyre pressure.

The tyre pressure is important!

Check the tyre pressure regularly. The correct pressure is listed in the

adjacent table and on the decal on the inside of the fuel filler flap.

If you drive with tyres at the wrong pressure, the car’s handling will

be markedly impaired and tyre wear will increase.

Note that the values in the table refer to cold tyres (outside temperature).

Tyres get warm and pressure increases after just a few kilometres driving.

This is normal, so do not let out air if you check the pressure when the

tyres are warm. However, you should increase pressure if it is too low.

Remember that tyre pressure can vary depending on exterior temperature.

Therefore check the tyres outdoors when the tyres are cold.

Tyre pressure table

The tyre pressure decal on the inside of the fuel filler flap shows what

pressure the tyres should have with different load and speed conditions.

8904041n

1:1

1:2

1. Other markets (not USA, Canada)

1:1. Volvo original tyre

1:2. Spare tyre

2. Australia

121

Wheels and tyres

Spare wheel “Temporary Spare” (certain variants

and markets)

The “Temporary Spare” should only be used for the short time it takes to

repair or replace the normal tyre.

By law it is only legal to temporarily use the spare wheel/tyre in

connection with tyre damage. A wheel/tyre of this type should

therefore be replaced by a normal wheel/tyre.

Bear in mind that this tyre combined with the other normal tyres may

cause different driving characteristics.

The maximum speed with a “Temporary Spare” is therefore

80 km/h (50 mph).

NOTE! Only use the car’s original spare wheel! Tyres of other dimen-

sions may damage your car. Only one spare wheel may be used at a time.

Tyres with tread wear

indicators

Tread wear indicators are narrow, raised areas

across the tread that have approximately

1.6 mm less tread depth than the remainder of

the tyre (the letters TWI are on the side of the

tyre). When this bar is visible, only 1.6 mm of

tread remains and the tyre should be replaced

immediately. Bear in mind that road grip and

the tyre's ability to push water out of the way is

already affected markedly when there is 3-4 mm

7700312m

of remaining tread.

Changing the tyres - summer/winter

When you change between summer and winter tyres; mark on the tyre

which side they were fitted: For example, L = left, R = right.

NOTE! Tyres should have the same direction of rotation throughout their

life. Tyres with tread designs that are made to roll only in one direction,

have the direction of rotation marked with an arrow on the tyre.

If the tyres are fitted incorrectly this will impair the car's braking characte-

ristics and the ability to disperse rain, snow and slush.

IMPORTANT!

Tyres with the greatest tread depth should always - irrespective of rear

or front wheel drive - be fitted at the rear.

Contact your closest Volvo dealer to check if you are unsure.

Storage

Wheels should be stored horizontally or suspended, not vertically.

122

The spare wheel is stored under the carpet in the cargo compartment.

Remember to set out the warning triangle.

· Apply the parking brake and put into first gear on cars with manual

transmission - position P on cars with automatic transmission.

Put chocks in front and behind of the wheels that are to remain on the

ground.

· Cars with steel wheel rims have removable wheel covers. Prise off

the wheel cover with a thick screwdriver or the like. If tools are not

available, the wheel cover can be prised off by hand. Use protective

gloves. When you reinstall the wheel covers: ensure that the wheel

cover valve hole is opposite the wheels air valve.

Changing wheels

· Cars with aluminum rims with a cover: remove the cover using the

socket wrench.

· Loosen the wheel nuts 1/2-1 with the socket wrench. The nuts are

loosened by turning anticlockwise.

There are two jacking points on each side of the car. The jacking points

are marked on the door sill trims.

770

Remove wheel studs

770

7700401r

123

· Hold the jack against the pin in the jacking point as illustrated and

wind down the jack foot so that it is pressed flat against the

ground.

· Check again that the jack is mounted correctly according to

illustration and that the foot is positioned vertically under

mounting.

· Lift the car so that the wheel is free.

· Remove the wheel studs and lift off the wheel.

WARNING!

· Never crawl under the car when it is raised on a jack!

· The car and the jack should be on a solid horizontal surface.

· The car original jack should be used for wheel changing.

All other work on the car should be carried out using workshop

jacks and axle stands under the part of the car which is raised.

· Apply the parking brake, put into 1st gear or back up (reverse)

on manual transmission and position P on the automatic

transmission.

· Put chocks in front of and behind the wheels to remain on the

ground.

· Use large wooden blocks or large stones.

· The jack screw should be kept well lubricated.

Fitting

· Clean the contract surfaces on the wheel and hub.

· Mount the wheel and tighten the wheel bolts.

· Lower the car so that the wheels cannot rotate. Tighten the wheel studs

crosswise and in torque steps. Tightening torques: 140 Nm

(14.0 kpm). It is important that they are tightened to the correct torque.

Tightening should be checked with a torque wrench.

· Fit the hub cap.

· Screw the jack together before returning it to the cargo compartment.

· Ensure that the jack and tool kit are properly secured and do not cause

any rattling.

Changing wheels

The jack should be located so

7700245d

7700244d

124

125

Fuses, bulb replacement

Fuses 126

Relay/fuse box in the engine compartment 127

Fuses in the passenger compartment at dashboard end on driver’s side 128

Fuses in the passenger compartment within the sound

barrier on the driver’s side 129

Fuses in the cargo compartment 130

Bulb replacement 131

126

3703474d

Fuses

All electrical functions and components are

protected with a number of fuses to protect

your car’s electrical system from damage by

short-circuits or overloads.

Fuses are housed in four different locations in

the car:

1. Relay/fuse box in the engine compartment.

2. Fuse box in the passenger compartment

within the sound barrier on the drivers

side.

3. Fuse box in the passenger compartment at

dashboard end on drivers side.

4. Fuse box in the cargo compartment.

If an electrical component or function does not

operate it may be because the component fuse

was temporarily overloaded and burned out.

Look in the fuse diagram to locate the affected

fuse. Pull out the fuse and look at it from the

side to see if the curved wire is burned out.

Replace with a new fuse of the same colour and

ampere designation.

There are a number of spare fuses in the cover

on the end of the dashboard. There are also

pliers to assist you in pulling out and replacing

the fuses.

If the same fuse burns out repeatedly, there is a

fault in the component, and you should visit

your Volvo workshop to have it checked.

127

Fuse pliers

Intact fuse

Blown fuse

Fuses in the engine compartment

12. Engine control module (ECM) (petrol),

injection valves, (petrol),

mass air flow sensor (petrol) ............... 15

mass air flow sensor (diesel) .................. 5

13. Electronic throttle module (ETM),

solenoid valve ....................................... 10

14. Lambda-sond (petrol) .......................... 20

15. Crankcase ventilation heater, solenoid

valves, glow plugs (diesel) coil............. 10

16. Dipped beam (left) ............................... 20

17. Dipped beam (right) ............................. 20

18. – .............................................................. –

19. Engine control module (ECM) supply

(petrol), engine relay .............................. 5

20. Position lamps ..................................... 15

21. – .............................................................. –

No Ampere rating

1. ABS ...................................................... 30

2. ABS ...................................................... 30

3. – .............................................................. –

4. Parking heater (option) ........................ 25

5. Auxiliary lamps (option) ..................... 20

6. Starter motor relay ............................... 35

7. Windscreen wipers .............................. 25

8. – .............................................................. –

9. Fuel pump ............................................ 15

10. Ignition coils (petrol), engine control

module (ECM), injection valves (diesel),

fuel pressure regulator .......................... 20

11. Accelerator pedal sensor (APM), AC

compressor, electronics box fan ........... 10

3703757m

Fuses in the engine compartment

This fuse box contains 24 fuse positions. Be

sure to replace a blown fuse with a new fuse of

the same colour and amperage. There are also a

number of spare fuses.

128

3701482D

This fuse box contains 38 fuse positions. Fuses

are located inside the access panel on the end

face of the dashboard. There are also a number

of spare fuses.

9. OBDII, light switch (LSM), Steering

Angle Sensor (SAS), Steering Wheel

Module (SWM) ...................................... 5

10. Audio .................................................... 20

11. Amplifier .............................................. 30

12. RTI display ........................................... 10

13. Telephone ................................................ 5

14 - 38 –. ......................................................... –

Fuses in the passenger compartment at dashboard end on drivers side

Decal located in the end box cover. Indicates

positions and amperages

No Ampere rating

1. Power driver’s seat ............................... 25

2. Power passenger seat ........................... 25

3. Climate control system fan ................... 30

4. Control module, right front door .......... 25

5. Control module, left front door ............ 25

6. General lighting, ceiling (RCM),

Upper Electronic Module (UEM) ........ 10

7. Sunroof ................................................. 15

8. Ignition switch, SRS system, Engine

Control Module (ECM), SRS

deactivation on passenger side

(PACOS), immobilizer (IMMO) ........ 7,5

129

3703457r

14 15

19 20

21 22 23

25 26

Fuses in the passenger compartment within the sound barrier on the drivers side

This fuse box contains 36 fuse positions. The

fuses are located within the sound barrier on the

left-hand side. Be sure to replace a blown fuse

with a new fuse of the same colour and

amperage. Several spare fuses are found here as

well.

No Ampere rating

1. Seat heating, right side.......................... 15

2. Seat heating, left side ............................ 15

3. Horn ..................................................... 15

4. – .............................................................. –

5. – .............................................................. –

6. Reserve ................................................... –

7. Reserve ................................................... –

8. Alarm siren ............................................. 5

9. Brake lamp switch feed .......................... 5

10. Combined instrument panel (DIM),

climate control (CCM), parking heater,

power driver’s seat ............................... 10

11. Front and rear seat socket ..................... 15

12. – .............................................................. –

13. Reserve ................................................... –

14. Headlamp wipers .................................. 15

15. ABS, STC/DSTC ................................... 5

16. Bi-fuel, Electronically Controlled Power

Steering (ECPS), Bi-Xenon, headlamp

levelling ................................................ 10

17. Fog lamp, front left .............................. 7,5

18. Fog lamp, front right ........................... 7,5

19. Reserve ................................................... –

20. Reserve ................................................... –

21. Transmission Control Module (TCM),

reverse gear inhibitor (M66) ................ 10

22. Main beam, left ..................................... 10

23. Main beam, right .................................. 10

24. – .............................................................. –

25. – .............................................................. –

26. Reserve ................................................... –

27. Reserve ................................................... –

28. Power passenger seat, audio .................. 5

29. Reserve ................................................... –

30. BLIS ....................................................... 5

31. Reserve ................................................... –

32. Reserve ................................................... –

33. Vacuum pump ...................................... 20

34. Washer pump, headlamp wipers........... 15

35. – .............................................................. –

36. – .............................................................. –

130

3703477d

101112

222021

3029

2524 26

18171516 19

32 36353433

Fuses in the cargo compartment

The fuses are located behind the upholstery on

the left-hand side. Be sure to replace a blown

fuse with a new fuse of the same colour and

amperage.

No Ampere rating

1. Reversing lamp ..................................... 10

2. Parking lamps, fog lamps, cargo

compartment lighting, numberplate

lighting, LEDs in brake lighting ........... 20

3. Accessories (AEM) .............................. 15

4. Reserve ................................................... –

5. REM electronics ................................... 10

6. CD changer, TV, RTI ........................... 7,5

7. Towing bracket wiring (30-feed).......... 15

8. Cargo compartment socket ................... 15

9. Rear right door: power window,

power window lock .............................. 20

10. Rear left door: power window, power

window lock ......................................... 20

11. Reserve ................................................... –

12. Reserve ................................................... –

13. Diesel filter heater ................................. 15

14. – .............................................................. –

15. Reserve ................................................... –

16. Reserve ................................................... –

17. Audio accessories ................................... 5

18. Reserve ................................................... –

19. Foldable head restraint .......................... 15

20. Towing bracket wiring (15-feed) ......... 20

21. Reserve ................................................... –

22. – .............................................................. –

23. AWD ................................................... 7,5

24. Four-C SUM ........................................ 15

25. – .............................................................. –

26. Parking assistance .................................. 5

27. Main fuse: towing bracket wiring,

Four-C, parking assistance ................... 30

28. Central locking system (PCL) .............. 15

29. Trailer lighting, left: parking lamp,

direction indicator ................................. 25

30. Trailer lighting, right: brake lamp, fog

lamp, direction indicator ....................... 25

31. Main fuse: Fuse 37, 38......................... 40

32. – .............................................................. –

33. – .............................................................. –

34. – .............................................................. –

35. – .............................................................. –

36. – .............................................................. –

37. Rear window defroster ......................... 20

38. Rear window defroster ......................... 20

131

Replacing bulbs

3500534d

General

All bulb specifications are found on page 166.

The following list contains bulbs and point-

source lamps that are specialised or unsuitable

for changing except by a workshop:

· General interior lighting in the ceiling

· Ceiling lighting

· Reading lamps

· Glovebox lighting

· Direction indicators in the door mirrors

· Approach lighting in the door mirrors

· High-level brake light

· Bi-Xenon headlamps

Important!

Never touch the bulb glass with your fing-

ers. Grease and oils from your fingers are

vaporised by the heat, coating and damaging

the reflector.

WARNING!

On cars with Bi-Xenon headlamps, all

work on the lights should be carried out by

an authorised Volvo workshop.

Bi-Xenon headlamps must be handled

with extreme care due to the high-voltage

unit.

132

3500903d

Front position/parking lamp*

· Switch off all lights and turn ignition key to

position 0.

· Remove the main headlight cover by

turning it anticlockwise.

· Pull out the bulb and its socket. Replace the

bulb.

· Press the bulb and its socket back into

place.

· Check that the new bulb lights.

· Screw the cover back into place; “TOP”

should be up!

Replacing bulbs

Dipped and main beam

Replace headlamp bulbs from the engine

compartment.

· Switch off all lights and turn ignition key

to position 0!

· Open the bonnet.

· Remove the cover by twisting

anticlockwise (1).

· Pull off the connector (2).

· Disconnect the spring clamp. First push to

the right so that the spring disconnects and

then out and down (3).

· Pull the bulb out and replace with a

new one (4).

· Replace the bulb (1). It can only be fitted

in one position.

3500535d

3500536d

TOP

· Press the clamp spring upwards and a little

to the left so that it secures in its catch (2).

· Press the connector back into place (3).

· Screw the cover back into place

; “TOP”

should be upwards (4)!

133

Replacing bulbs

Left-hand rear edge of car

Replacing bulbs in the rear

lamp cluster

All bulbs in the rear lamp cluster can be

replaced from inside the cargo compartment.

· Switch off all lights and turn ignition key to

position 0.

· Unlock and fold down the side panel

inwards to allow access to the bulbs. On the

right-hand side, it is easier to access the

bulbs if you first extend the load curtain as

much as possible.

The bulbs are located in a removable lamp

holder which is secured with two locking pins.

To replace bulbs in the lamp holder:

· Press the locking pins towards one another

in order to remove the lamp holder from the

lamp housing.

· Replace the bulb.

· Press back the lamp holder.

· Close and secure the side panel.

Location of bulbs in rear lamp

cluster

1. Position lamp

2. Position/Parking lamp/

Foglampbulb

3. Position

4. Reversing lamp

5. Position (side marker) light

NOTE! If the error message "LAMP

FAULT" / "CHECK BRAKE

LIGHT" remains after a faulty bulb

has been replace then an authorised

Volvo workshop needs to be consulted

to rectify the fault.

3501688d

NOTE! LED brake light bulbs should be

replaced at a Volvo workshop.

Replacing bulb in front corner

· Switch off all lights and turn ignition key to

position 0.

· Using a screw driver, press the guide lug

and pull out the entire lamp housing.

· Press down the spring clip and undo the

connector from the lamp housing.

· Twist the bulb holder anticlockwise and

remove it.

· Press the bulb inwards, turn it anticlockwise

and remove it from the bulb holder.

· Replace with a new bulb and refit the bulb

holder in the lamp housing.

· Press the connector back onto the lamp

holder.

· Switch on the ignition and check that the

new bulb lights.

· Press the lamp housing home and check that

it is seated securely.

3500893d

134

Replacing front fog lamp bulb

NOTE! Never touch the bulb glass with

your fingers.

· Switch off the lights and turn the ignition

key to position 0.

· Turn the bulb holder a little anticlockwise.

· Remove the bulb and replace with a new.

· Refit the bulb holder. (The profile on the

bulb holder aligns with the profile on the

base of the lamp).

· Replace the bulb holder by turning a little

clockwise. The marking "TOP" on the

headlamp cover should be upwards!

Replacing bulbs

3500894d

3500889d

3500903d

Replacing position/

parking lamp bulb

· Switch off all lights and turn ignition key

to position 0.

· Remove the main headlight cover by turning

it anticlockwise.

· Pull out the bulb and its socket. Replace

the bulb.

· Press the bulb and its socket back into

place.

· Check that the new bulb lights.

· Screw the cover back into place; “TOP”

should be up!

Replacing side

direction indicator bulb

· Open the front door halfway.

· Insert your hand behind the front wing and

press out the lamp. Allow the cables to

remain in the bulb holder.

· Twist the bulb holder 1/4 turn anticlockwise

and pull straight out.

· Pull the defective bulb straight out.

· Replace the bulb and press the lamp

straight in.

135

3500916d

Replacing numberplate

lighting bulb

· Switch off the lights and turn the ignition

key to position 0!

· Remove the screw with a screwdriver.

· Loosen the whole lamp housing carefully

and pull it out.

· Turn the connector anticlockwise and pull

out the bulb.

· Replace bulb.

· Reinstall the connector and turn it clockwise.

· Reinstall and screw the whole lamp housing

into place.

Replacing bulbs

Replacing courtesy lighting

bulb - front door

The courtesy lighting is under the dashboard

on the driver’s and passenger sides. Carry out

the following to replace:

· Insert a screwdriver and twist lightly so

that the lamp housing loosens.

· Remove the faulty bulb and install a new

bulb.

· Check that lamp lights and reinstall the

lamp housing.

3500871d

3500888D

Replacing courtesy lighting

bulb - rear door

· Insert a screwdriver and twist lightly so that

the lamp housing loosens.

· Undo the cable from the lamp housing and

then remove the glass from the lamp

housing by pressing the two side clips

outward.

· Pull out the old bulb and fit a new one.

· Refit in the reverse order.

136

Replacing bulbs

Replacing the make up-mirror

bulb

· Insert a screwdriver and gently turn so that

the glass loosens.

· Prise out the bulb and replace with a new

one.

· Press the lamp glass back into place and

make sure it is secured correctly.

3500891d

Replacing side marker bulb

· Press the entire lamp insert backwards and

remove.

· Try if possible to remove the lamp insert

with your fingers. Otherwise, use a plastic

or wooden tool so as not to damage the

paintwork.

· Turn the lamp holder anticlockwise and

remove.

· Install a new bulb.

· Insert the lamp holder and turn it clockwise.

· Refit the lamp insert by pressing it into

place in the body.

3501378m

Replacing cargo

compartment bulb

The lighting is to the left and right of the boot

lid. Carry out the following to replace:

· Insert a screwdriver and twist lightly so that

the lamp housing loosens.

· Remove the faulty bulb and install a new

bulb.

· Check that the lamp lights and reinstall the

lamp housing.

3500918d

Insert screwdriver and turn carefully

137

Car care and Service

Rustproofing 138

Checking and repairing paintwork damage 139

Washing 140

Volvo Service 143

Bonnet, Engine Compartment 145

Diesel 147

Engine oil 148

Coolant 150

Brake fluid, Power steering, Windscreen washer fluid 151

Battery care 152

Replacing wiper blades 154

138

Rustproofing

Rustproofing - check and repair

Your Volvo received a very thorough and complete rustproofing at the

factory. Areas that are extremely vulnerable, such as the underbody,

have been sprayed with a thick, wear-resistant anti-corrosion compound

on the outside. Members, cavities and enclosed sections are sprayed

internally with a thin, penetrating rust inhibitor.

The car’s rustproofing is maintained by doing the following:

· Keep the car clean! Wash chassis components*, the underbody,

and the inside and edges of wheel arches with a pressure washer.

When high pressure washing - hold the spray nozzle at least 30 cm

away from painted surfaces!

· Check and repair the rustproofing regularly.

* Trailing arms, link arms, spring mountings and spring strut seats.

The car’s rustproofing does not normally require treatment for approxima-

tely 8 years. After that time, it should be treated at three year intervals. If

your car requires treatment, consult your Volvo workshop.

Improving

If you want to repair the rustproofing yourself, make sure the area is clean

and dry. Hose down, wash and dry the car thoroughly. Use a rustproofing

agent in a spray can or one that is intended for brush application.

Two types of rustproofing agent are available:

a) thin (colourless), for visible places

b) thick, for areas prone to wear on the underbody and in the wheel

arches

Possible repair areas with these agents:

· Visible welds and sheet metal joints - thin fluid

· Underbody and wheel arches - thick fluid

· Door hinges - thin fluid

· Bonnet hinges and catch - thin fluid

When you have finished treatment, excess rustproofer can be wiped off

using a rag dampened with white spirit.

Parts of the engine and suspension strut mountings in the engine bay

are treated at the works with a wax-based colourless rustproofing agent.

This withstands normal detergents without dissolving and losing its

rustproofing ability. On the other hand, if you wash the engine using

aromatic solvents such as turpentine or white spirit (especially those

which do not contain emulsifiers), the protective wax should be renewed

after washing. Your Volvo dealer has such waxes in stock.

139

Repairing paintwork damage

8100503A

Mask if necessary

Paint

Paint is an important part of the car’s rustproo-

fing and should therefore be checked regularly.

Repair paintwork damage immediately so that it

does not start to rust. The most common types

of paintwork damage that you can repair

yourself are:

· minor stone chips and scratches

· damage to wing edges and sills

When repairing paintwork, the car should

be clean and dry with a temperature above

+ 15 °C.

Colour code

Make sure you have the right colour.

The colour code number is on the data plate in

the engine compartment.

0300048A

2. KG

VOLVO CAR CORP.

MADE IN

SWEDEN

Minor stone chips and

scratches

Material:

· Primer in a can

· Paint in a can or a touch-up pen

· Brush

· Masking tape

· If the stone chip has not gone down to the

bare metal and an unpainted colour coat

remains, you can add paint immediately

after removing dirt.

Do as follows if the stone chip went down to

the bare metal:

· Fasten a piece of masking tape over the

damaged surface. Then remove the tape,

removing any paint residue (illustration 1).

· Stir the primer thoroughly and apply using

a fine brush or matchstick (illustration 2).

· When the primer is dry, apply the surface

coat with a brush.

· Ensure that the paint is well stirred and

apply several thin coats allowing it to dry

between coats.

· The procedure is the same for scratches, but

masking tape can be used to protect

undamaged paintwork (illustration 3).

· Wait a day or so and then finish the repair

by polishing. Use a soft rag and apply

lapping paste sparingly.

Remove any paint residue with tape

Colour code

140

WARNING!

After washing: always test the braking so that damp and corrosion do

not affect the brake pads and impair the brakes! Depress the brake pedal

lightly now and again when driving longer distances in the rain or slushy

snow to warm up and dry the brake discs and pads. You should also do

this when starting in very damp or cold weather conditions.

Washing

Wash the car frequently!

Wash the car as soon as it becomes dirty, especially in the winter when

road salt and moisture can lead to corrosion.

Wash the car as follows:

· Thoroughly hose off the dirt on the car underbody (wheel arches,

wing edges, etc.).

· Rinse the entire car to remove loose dirt.

· When using high pressure hose:

Ensure that the high pressure hose nozzle does not come nearer

than 30 cm from the bodywork. Do not spray directly at the locks.

· Wash with a sponge using a lot of water with or without detergent.

· You can use lukewarm (maximum 35 °C) but not hot water.

· If the dirt is ingrained, you can wash the car with cold degreasing

agent, but then be sure that there is a drain separator where you are

washing the car. When using cold degreasing agent, ensure that the

car is not in direct sunlight or that the paint is warm from sunlight

or a warm engine. Sunlight and heat can cause permanent damage.

Consult your Volvo workshop.

· Dry the car with a clean, soft chamois.

· Clean the wiper blades with a lukewarm soap solution.

Suitable detergent:

Car shampoo.

Keep in mind the following:

Always wash off bird droppings from the paintwork as fast as

possible.

Bird droppings contain chemicals that affect and discolour paintwork

quickly. The discoloration cannot be polished off.

WARNING!

Do not wash the engine when it is still warm. Fire risk!

Exterior plastic parts

A special cleaning agent, available from Volvo dealers, is recommended

for cleaning exterior plastic parts. Never use strong stain removers.

141

Washing

Cleaning the interior

Treating spots on fabric upholstery

A special cleaning agent, available from Volvo dealers, is recommended

for cleaning the fabric upholstery. Other chemicals can impair the fire

retardant qualities of the upholstery.

Automatic car wash

An automatic car wash is a simple and fast way of washing the car.

Remember that an automatic car wash can never replace a proper

handwash.

The brushes of an automatic car wash do not reach all areas.

During the first months of the car’s life it is recommended that you only

handwash the car.

Polishing and waxing

Polish and wax the car when you feel the paintwork is matte and when

you wish to give the paintwork extra protection, such as before winter.

The car does not usually need polishing until after one year. It can be

waxed earlier.

Wash and dry the car thoroughly before you begin polishing and/or

waxing. Clean away asphalt or tar splashes with Volvo asphalt remover

or white spirit.

Stubborn marks can be removed with fine rubbing paste for car paint-

work. First polish and then wax with liquid or solid wax. Carefully

follow the instructions on the package. Many preparations contain both

polish and wax.

Do not wax or polish in direct sunlight.

Treating spots on leather upholstery

A special cleaning agent, available from Volvo dealers, is recommended

when cleaning leather upholstery. Treat the leather upholstery once or

twice a year using Volvo’s leather care kit. Never use strong solvents.

Such products may damage fabric, vinyl and leather upholstery.

Treating spots on interior plastic parts and surfaces

A special cleaning agent, available from Volvo dealers, is recommended

for cleaning interior plastic parts and surfaces. Do not scrape or rub spots.

Never use strong stain removers.

Cleaning seat belts

Use water and synthetic detergent. Special upholstery detergent is

available from your Volvo dealer. Make sure the seat belt is dry before

allowing it to retract.

IMPORTANT!

Sharp objects and Velcro may damage the textile upholstery.

142

Cleaning door mirrors and front side

windows with water-repellent coating (option)

Never use products such as car wax, degreaser or similar on mirror/glass

surfaces as this could ruin their water-repellent properties.

Take care when cleaning so as not to damage the glass surface.

To avoid damaging glass surfaces when removing ice, only use plastic ice

scrapers.

There is natural wear of the water-repellent coating.

NOTE! Treatment with a special finishing agent available from Volvo

dealers is recommended in order to maintain the water-repellent proper-

ties. This should be used first after three years and then each year.

Washing

143

Volvo Service

Before the car left the factory, it was thoroughly test driven. It was

checked again in accordance with Volvo Car Corporation regulations

before it was handed over to you.

Volvo service programme

In order for you to keep your Volvo at the highest level of traffic safety,

driving safety and reliability you should follow the Volvo service

programme which is specified in the Warranty and Service schedule.

We advise you always to let a Volvo workshop carry out the servicing

and repair work. Your Volvo workshop has the personnel, the special

tools and the service literature which guarantees you the highest quality

of service. Your Volvo workshop always uses Volvo Genuine parts.

The Volvo Service schedule is developed for the normal motorist.

Important!

For the Volvo warranty to apply, check and follow the instructions in

the Service and Warranty Manual.

Volvo Service

Service or installation of accessories

Service or installation of accessories that affect the car’s electrical system

can only be carried out using electronic equipment specially developed

for the car. It is therefore important that you always contact your Volvo

workshop before beginning or carrying out service work that affects the

electrical system.

Recording vehicle data

One or more computers in your Volvo car can record detailed information.

This information is intended for research purposes in order to further

develop safety and to diagnose faults in certain systems. It can included

data such as seat belt usage by the driver and front passenger, information

on the function of different systems and modules in the car and informa-

tion on the status of the engine, throttle control, steering, brake and other

systems.

This information can contain data on the driver’s driving style.

Such data can contain information including, but not limited to, vehicle

speed, use of the brake or accelerator pedal and steering wheel manoeuv-

res. The latter data can be stored for a limited time while the car is driven

and during the course of a collision or a near miss.

Volvo Car Corporation will not distribute this stored information without

permission. Volvo Car Corporation may, however, be forced to provide

this information if required by national legislation.

In general, Volvo Car Corporation and authorised workshops may read

and use the information.

144

WARNING!

The car ignition system has very high voltage!

The voltage in the ignition system is dangerous!

Do not touch spark plugs, ignition cables or the ignition coil when

the engine is running or the ignition is switched on!

The ignition should be switched off when:

· Conducting engine tests.

· Replacing parts in the ignition system, such as spark plugs,

ignition coil, distributor, ignition cables, etc.

Volvo Service

7700243d

Note the following before you begin

working on your car:

Battery

· Ensure that the battery cables are correctly connected and tightened.

· Never disconnect the battery when the engine is running (e.g. when

replacing the battery).

· Never use a fast charger to charge the battery. The battery cables

should be disconnected when recharging.

Environmental care

The battery contains acid that is both corrosive and poisonous.

It is important that the battery is handled in an environmentally friendly

way. Let your Volvo dealer assist you.

Lifting the car

If the car is lifted with a workshop jack, it should sit with the front edge

on the engine support arm. Do not damage the splashguard under the

engine. Ensure that the jack is positioned so that the car cannot slide off

the jack. Always use axle stands or the like.

If you lift the car using a two pillar workshop lift, ensure that the front and

rear lift arms are fixed under the lifting points on the door sill.

See the illustration.

145

Bonnet, Engine compartment - left-hand drive

WARNING!

Check that the bonnet lock properly when

you close it!

Opening the bonnet

Pull the handle on the far left under the

dashboard. You hear when the lock releases.

Insert the hand in the centre of the front edge

of the bonnet and press up the safety catch

handle. Open the bonnet.

...press up and open

Pull the handle..

8200092d

Engine compartment

1 Expansion tank, cooling system

2 Engine oil filler pipe

3 Engine oil dipstick

4 Clutch/brake fluid reservoir

5 Battery (in cargo compartment)

6 Data plate

7 Radiator

8 Power steering fluid reservoir

9 Air filter

10 Washer fluid reservoir

11 Main fuse box

12 Integrated relay/fuse box

WARNING!

Electric engine cooling fan:

Cooling fan may continue running and can

start itself after the engine is switched off!

2000305d

146

Bonnet, Engine compartment - right-hand drive

WARNING!

Electric engine cooling fan:

Cooling fan may continue running

and can start itself after the engine

is switched off!

WARNING!

Check that the bonnet locks properly

when you close it!

Opening the bonnet

Pull the handle on the far right under the

dashboard. You hear when the lock releases.

Insert the hand in the centre of the front edge of

the bonnet and press up the safety catch handle.

Open the bonnet.

..press up and open

Pull the handle...

8200095d

Engine compartment

1 Expansion tank, cooling system

2 Engine oil filler pipe

3 Engine oil dipstick

4 Clutch/brake fluid reservoir

5 Battery (in cargo compartment)

6 Data plate

7 Radiator

8 Power steering fluid reservoir

9 Air filter

10 Washer fluid reservoir

11 Main fuse box

12 Integrated relay/fuse box

2000306d

147

Diesel

Fuel system

Only use diesel fuel from a well-known oil company that fulfils the

requirements for recommended fuel grade as described on page 164.

Never use diesel of doubtful quality. Special diesel fuel for winter use is

available from large oil companies. This fuel is less viscous at low

temperatures and reduces the risk of wax building up in the fuel system.

Keeping the tank well filled reduces the risk of condensation in the tank.

During filling you should check that the area around the filler pipe is

clean. If you do the refuelling from a tank of your own, you should

filter the fuel.

Avoid spilling onto the paintwork. Wash off any spills with detergent

and water.

Empty tank

No special procedures are required if the tank runs dry. The fuel system

is bled automatically if the ignition switch is kept in position II for

approx. 60 seconds before the start attempt.

Draining condensation water from fuel filter

The fuel filter removes condensation, which could otherwise affect engine

function, from the fuel. The fuel filter should be drained as specified in the

Service and Warranty Book, and when you suspect that the car has been

filled with contaminated fuel.

Important!

Diesel type fuels which must not be used:

special additives, Marine Diesel Fuel, fuel

oil, RME (Rape Methyl Ester), vegetable

oil.

These fuels do not fulfil the requirements

of Volvo’s recommendation and generate

increased wear and engine damage that is

not covered by the Volvo warranty.

148

Checking and changing the

engine oil and oil filter

Using oil of a higher grade is permitted. Volvo

recommends using an oil of a higher grade than

that specified on the decal for adverse driving

conditions. See page 161.

Adverse driving conditions

Check the oil level more frequently for long

journeys:

· towing a caravan or trailer

· in mountainous regions

· at high speeds

· in temperatures colder than -30 °C or hotter

than +40 °C

· shorter driving distances (shorter than

10 km) at low temperatures (under 5 °C).

This may result in abnormally high oil

temperature or oil consumption.

Change the oil and oil filter in accordance with

the intervals specified in the Service and

Warranty Booklet. When filling oil to top up a

low oil level, the oil being filled must be of the

same grade and viscosity as the oil in the

engine.

Checking the oil level in a new car is especially

important before the first scheduled oil change.

The Service and Warranty Booklet specifies the

odometer readings for oil changes.

Volvo recommends checking the oil level every

2500 km. The most accurate measurements are

made on a cold engine before starting. The

measurement will be inaccurate if taken

immediately after the engine is switched off.

The dipstick will indicate that the level is too

low because the oil has not had time to flow

down into the oil sump.

Important!

Always use oil of the prescribed grade, see

engine compartment decal.

Check the oil level frequently and change

the oil regularly.

The engine will be damaged if a lower than

specified grade of oil is used or if the car is

driven with the oil level too low.

2200315d

Engine oil

149

IMG-203460

Engine oil

Checking the oil in a cold engine:

• Wipe the dipstick clean before checking the

level.

• Check the oil level using the dipstick. The

oil level must be between the MIN and

MAX marks.

• If the level is close to the MIN mark, start

by topping up with 0.5 litres of oil. Top up

until the oil level is nearer the MAX than

the MIN mark on the dipstick. See page

161-162 for volumes.

Checking the oil in a warm engine:

• Park the car on a level surface, switch off

the engine and wait 10-15 minutes to give

the oil time to run back down to the sump.

• Wipe the dipstick clean before checking the

level.

• Check the oil level using the dipstick. The

oil level must be between the MIN and

MAX marks.

• If the level is close to the MIN mark, start

by topping up with 0.5 litres of oil. Top up

until the oil level is nearer the MAX than

the MIN mark on the dipstick. See 161-162

for volumes.

The oil level must be within the area

marked on the dipstick.

WARNING!

Do not spill oil onto the hot exhaust manifold

due to the risk of fire.

Important!

Never fill above the MAX mark. Oil

consumption may increase if too much oil

is poured into the engine.

150

Coolant

Checking and topping up coolant

Follow the instructions on the packaging when topping up coolant.

It is important that the mixture of coolant concentrate and water is correct

for the prevailing weather conditions.Never top up with water only.

The risk of freezing increases with both too little and too much coolant

concentrate.

See capacities and recommended grade for fluids and oils on page 160.

Important!

Always use coolant with anti-corrosion agent as recommended by

Volvo.

New cars are filled with coolant that can withstand temperatures

down to approximately -35 °C.

Check the coolant regularly

The level should lie between the MIN and MAX marks on the

expansion tank.

Top up with fluid when the level has fallen to the MIN mark.

Important!

The engine must only be run with a well-filled cooling system.

High temperatures can occur, causing a risk of damage (cracks) to the

cylinder head.

WARNING!

The coolant may be very hot. If the coolant requires topping up

when the engine is at operating temperature, unscrew the expansion

tank cap slowly to gently release the overpressure.

151

Brake fluid, Power steering, Windscreen washer fluid

Washer fluid reservoir

The wipers for the windscreen and headlamps

share the same fluid reservoir.See capacities and

recommended grade for fluids and oils on

page 160.

Use washer fluid during the winter so that the

fluid does not freeze in the pump, reservoir

and hoses.

Tip: clean the wiper blades when topping up

washer fluid.

3601948d

Washer fluid reservoir

Clutch and brake fluid reservoir

The brake and clutch fluid have a common

reservoir

. The fluid level must be between the

MIN and MAX marks. Check the level

regularly. Change the brake fluid every other

year or at every other regular service.

See capacities and recommended grade for

fluids and oils on page 160.

NOTE! The fluid should be changed annually

on cars which drive in conditions requiring

hard and frequent braking, driving in mountains

or tropical climates with high humidity.

Location dependent on whether car is left or

right-hand drive.

5200678d

ADD

FULL

Power steering fluid reservoir

Check the level at every service. It is not

necessary to change the fluid. The level should

lie between the ADD and FULL marks.

See capacities and recommended grade for

fluids and oils on page 160.

NOTE! If a fault occurs in the power steering

(or if the car has no power and is to be towed)

the car can still be steered. Remember that the

steering will be much heavier than normal and

more strength is required to turn the steering

wheel.

Power steering fluid reservoir

Clutch and brake fluid

reservoir

WARNING!

If the level of brake fluid in the reser-

voir is below the MIN mark, the car

should not be driven until the brake flu-

id has been topped up. The reason for

the loss of brake fluid must be investi-

gated.

152

Battery care

· Check all battery cells. Use a screwdriver to

remove the caps. Each cell has its own max-

imum level mark.

· If necessary, top up with distilled water to

the battery’s maximum mark.

· Never fill above the maximum mark (A).

Important!

Always use distilled or deionised water

(battery).

· Tighten the caps properly.

NOTE! The life of the battery is shortened if it

Battery care

The service life and function of the battery is

influenced by factors such as the number of

starts, discharging, driving style, driving

conditions and climatic conditions.

Repeated use of the parking heater and other

great power consumers in combination with

short trips can lead to battery discharge and

thereby difficulty starting.

For the battery to function satisfactorily,

consider the following:

· Regularly check that the battery fluid level

is correct (A).

becomes discharged repeatedly.

WARNING!

Batteries can generate oxyhydrogen gas,

which is highly explosive.

One spark, which can be generated if you

connect the jump leads incorrectly, is suf-

ficient to make the battery explode.

The battery contains sulphuric acid, which

can cause serious burns.

If the acid comes into contact with eyes,

skin or clothing, flush with large quanti-

ties of water.

If acid splashes into the eyes, seek medical

attention immediately.

3100063d

Symbols:

Use protective goggles.

Further information in the

owner’s manual.

Store the battery out of the

reach of children.

The battery contains

corrosive acid.

Avoid sparks and open

flames.

Risk of explosion.

153

3100181

Battery care

A. Battery without cover

B. Battery with cover

Replacing the battery

Removing the battery:

· Switch off the ignition and remove the key.

· Wait at least 5 minutes before touching any

electrical terminals. This allows time for the

information in the car’s electrical system to

be stored in the control modules.

· Undo the screws from the lock brace over

the battery and remove the brace.

· Bend up the plastic cover over the negative

battery terminal or unscrew the cover from

the battery.

· Disconnect the negative battery cable.

· Detach the lower console holding the

battery.

· Bend aside the plastic cover and disconnect

the positive cable.

· Remove the battery.

Fitting the battery:

· Position the lower console and screw it in

place.

· Position the lower console and screw it in

place.

· Connect the positive cable, press in and fold

· Connect the negative cable, fold down the

plastic cover.

· Fit the plastic cover or the cover over the

battery.

· Make sure the evacuation hose is correctly

connected to both the battery and the outlet

in the bodywork.

· Fit the lock brace over the battery and

tighten the screws.

WARNING!

Batteries can generate oxyhydrogen gas,

which is very dangerous. One spark,

which can be generated if you connect

the jump leads incorrectly, is sufficient to

make the battery explode. The battery

contains sulphuric acid, which can cause

serious burns. If the acid comes into

contact with eyes, skin or clothing, flush

with large quantities of water. If acid

splashes into the eyes, seek medical

attention immediately.

154

Replacing wiper blades

Replacing windscreen wiper

blades

• Fold out the wiper arm and hold the wiper

blade.

• Push in the ribbed locking springs on the

wiper blade while lifting it from the arm ex-

tension.

• Install the new blade following the instruc-

tions in reverse order and check that the

blade is properly secured.

NOTE! Keep in mind that the wiper blade on

the driver's side is longer than the blade on the

passenger side.

3603056d

155

Specifications

Type designation 156

Dimensions and weights 157

Engine specifications 158

Capacities 160

Fuel 163

Catalytic converter and suspension 165

Electrical system 166

156

Specifications

Type designation

Whenever contacting your Volvo dealer and

when ordering spare parts and accessories for

your car, it makes things easier if you know

your cars type designation, vehicle

identification number and engine number.

1. Decal for parking heater.

2. Type and model year designation, and

vehicle identification number.

3. Engine type designation, component and

serial number.

4. Engine oil decal* specifies oil grade and

viscosity.

5. Gearbox type designation and serial

number

a: Manual gearbox

b: Automatic gearbox AW.

Type designation, vehicle identification

number, maximum permissible weights, codes

for colour and upholstery and type approval

number.

* Certain engine variants

AISIN

SERIALNO

MADE

INJAPAN

LTD

P1208632

T100001 3,77

M56L

YV1LS5502N2000327

1234567

Ohtk jdtr

Ehdfjljl ncy

Mgdh ytegf

BFDRYOIHV

HFGJJFFOI

HFGDOIHV

Gfdr urtvb

Seyj tu

Fkfu

Seyj tu

0300387d

VOLVOCARCORP.

SWEDEN

MADEIN

50-42LE

B5254S

157

0300047A

KG2.

VOLVO CAR CORP.

SWEDEN

MADE IN

Weights

The kerb weight includes the driver, the fuel tank 90% full and all fluids.

The weight of passengers and accessories, such as a towbar, towball load

(when a trailer is hitched, see table), load carriers, and roof box, affect

load capacity and must not be included in the kerb weight.

Permitted weight (in addition to driver) = Gross vehicle weight - Kerb

weight. For the location of the decal, see page 156.

1. Max. total weight

2. Max. train weight (car+trailer)

3. Max. front axle load

4. Max rear axle load

Max load: see registration papers

Max roof load: 100 kg

Maximum trailer weight: 1800 kg

Warning!

The driving characteristics of the car change depending on how

heavily it is loaded and how the load is distributed.

Dimensions and weights

Measurements

Length ................................................................ 482 cm

Width ................................................................. 183 cm

Height ................................................................ 145 cm

Wheelbase .......................................................... 279 cm

Front track ......................................................... 158 cm

Rear track ........................................................... 156 cm

158

Engine specifications

2.0T BIFUEL 2.4 2.4 2.5T 2.4T

CNG

Engine variant B5204T5 B5244SG B5244S B5244S2 B5254T2 B5244T4

Output* (kW/rps) 132/92 103/97 125/98 103/75 154/83 162/83

AWD - - - - - -

(hp/rpm) 180/5500 140/5800 170/6000 140/4500 210/5000 220/5000

AWD - - - - - -

Torque* (Nm/rps) 240/30-83 192/75 225/75 220/55 320/25-75 285/33-83

AWD - - - - - -

(kpm/rpm) 24.5/1850-5000 19.6/4500 23.0/4500 22.5/3300 32.6/1500-4500 35.7/2100-4000

AWD - - - - - -

No. of cylinders 5 5 5 5 5 5

Bore (mm) 81 83 83 83 83 83

Stroke (mm) 77 90 90 90 93,2 90

Cylinder displacement (dm

(l)) 1.98 2.44 2.44 2.44 2.52 2.44

Compression ratio 9.5:1 10.3:1 10.3:1 10.3:1 9.0:1 8.5:1

Spark plugs:

Electrode gap (mm) 0.7 1.2 1.2 1.2 0.7 0.7

Tightening torque (Nm) 28 30 30 30 30 28

Thailand, Malaysia

* Output and torque as per test standard EU 80/1269. For petrol engines, 98 octane is always used for this test.

To verify the type of engine in the car - see the type designation stamped into the engine compartment (Type designations - page 156, point 3).

159

Engine specifications

T6 2.9 D5 2.4D

Engine variant B6294T B6294S2 D5244T D5244T2

Output* (kW/rps) 200/87 144/87 120/67 96/67

AWD - - - -

(hp/rpm) 272/5200 196/5200 163/4000 130/4000

AWD - - - -

Torque (Nm/rps) 380/30-83 280/65 340/29-50 280/29-50

AWD - - - -

(kpm/rpm) 38.8/1800-5000 28.6/3900 34.7/1750-3000 28.6/1750-3000

AWD - - - -

No. of cylinders 6 6 5 5

Bore (mm) 83 83 81 81

Stroke (mm) 90 90 93.2 93.2

Cylinder displacement (dm

(l)) 2.92 2.92 2.40 2.40

Compression ratio 8.5:1 10.3:1 18.0:1 18.0:1

Spark plugs:

Electrode gap (mm) 0.7 3x1.2 - -

Tightening torque (Nm) 30 25 - -

* Output and torque as per test standard EU 80/1269. For petrol engines, 98 octane is always used for this test.

To verify the type of engine in the car - see the type designation stamped into the engine compartment (Type designations - page 156, point 3).

160

Capacities

System Volume Recommended grade

Transmission fluid Manual, 5-speed (M56/M58) 2.1 litres Transmission fluid

: MTF 97309

Manual, 6-speed (M66) 2.0 litres

Automatic gearbox (AW55-51) 7.2 litres Transmission fluid

: JWS 3309

12.7 litres

Coolant Petrol engines without turbo 8.0 litres Coolant with corrosion protection mixed with water, see packaging.

Petrol engines with turbo 9.0 litres The thermostat starts opening at 90 ºC in petrol engines and at 82 ºC

Diesel engines 12.5 litres diesel engines.

Air conditioning Compressor oil 180-200 gram

PAG

Refrigerant 500-600 gram

R134a (HFC134a)

Brake fluid 0.6 litres DOT 4+

Power steering System: 0.9 litres Power steering fluid: WSS M2C204-A or equivalent product with

same of which reservoir 0.2 litres specifications.

Washer fluid reservoir Variant with headlamp wipers 4.5 litres Use a washer anti-freeze recommended by Volvo mixed with water

high pressure wash 6.4 litres at temperatures below freezing.

Fuel tank For tank volume, see Fuel section on page 163.

The recommended transmission fluid must be used to prevent damage to the gearbox. Do not mix with any other transmission fluid. If the

transmission is topped up with a different fluid, contact an authorised Volvo workshop for servicing.

Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the exact information.

Other fluids and lubricants

Fluid

Automatic gearbox (GM4T65)

Transmission fluid

Dexron III G

161

Capacities

Important!

Always use the prescribed oil grade and

viscosity.

If an oil other than that prescribed has been

used, contact the local authorised Volvo

workshop immediately for service.

Do not use extra oil additives. They could

damage the engine.

2200293v

Viscosity chart

Engine oil

Adverse driving conditions

Check the oil level more frequently for long

journeys:

· towing a caravan or trailer

· in mountainous regions

· at high speeds

· in temperatures colder than -30 °C or hotter

than +40 °C.

· shorter driving distances (shorter than

10 km) at low temperatures (under 5 °C)

This may result in abnormally high oil

temperature or oil consumption.

Choose a fully synthetic engine oil for adverse

driving conditions. It provides extra protection

for the engine.

Volvo recommends oil products.

162

Capacities

Engine oil

Including filter change

Thailand, Malaysia

Including filter change

The following applies when the above-

mentioned decal is fitted in the cars engine

compartment. For location, see page 156

Oil grade: ACEA A1/B1

Viscosity: SAE 5W-30

When driving under adverse conditions, use

ACEA A5/B5 SAE 0W-30.

The following applies when the above-

mentioned decal is fitted in the car’s engine

compartment. For location, see page 156

Oil grade: ACEA A5/B5

Viscosity: SAE 0W-30

Oil decal Oil decal

1.2

Engine variant Volume between Volume

/ litre

MIN y MAX

5.5

BIFUEL B5244SG 1.2 5.5

T6 B6294T 1.5 6.6

2.9 B6294S2

Engine variant Volume between Volume

/ litre

MIN y MAX

Including filter change

2.4D D5244T2 2.0 6.5

D5 D5244T

Engine variant Volume between Volume

/ litre

MIN y MAX

The following applies when the above-

mentioned decal is fitted in the cars engine

compartment. For location, see page 156

Oil grade: ACEA A3/B3/B4

Viscosity: SAE 5W-30

Oil decal

2.0T

2.4

2.4T

2.5T

B5204T5

B5244S

B5244S2

B5244T4

B5254T2

163

Fuel

Emission values are affected by fuel quality and may therefore differ from those specified if fuel of a different standard than that

recommended by Volvo is used.

Certain countries.

Fuel tank.

Engine variant Gearbox Consumption Carbon dioxide Tank volume

(litres/100 km)

emissions (g/km) (litres)

2.4 B5244S2 Manual 5-speed (M56) 8.9 212 70

Automatic gearbox (AW55-51) 9.6 229

2.4 B5244S Manual 5-speed (M56) 9.0 214 70

Automatic gearbox (AW55-51) 9.7 232

2.0T B5204T5 Manual 5-speed (M56) 9.0 214 80

Automatic gearbox (AW55-51) 9.8 234

2.5T B5254T2 Manual 5-speed (M56) 9.2 219 80

Automatic gearbox (AW55-51) 10.0 239

AW D Automatic gearbox (AW55-51) 10.5 252 72

2.4 B5244SG Bi-Fuel Manual 5-speed (M56) 9.2 220 30

Automatic gearbox (AW55-50) 9.9 242

D5 D5244T Manual 5-speed (M56) 6.5 172 70

Automatic gearbox (AW55-50) 7.7 204 70

2.4D D5244T2 Manual 5-speed (M56) 6.5 171 70

Automatic gearbox (AW55-50) 7.7 204

T6 B6294T Geartronic 11.1 268 80

4-speed (GM4T65)

2.9 B6294S2 Geartronic 10.6 255 80

4-speed (GM4T65)

2.4T B5244T4

Automatic gearbox (AW55-51) - - 70

Fuel consumption, emissions and volume

164

Fuel

Specified fuel consumption

Official fuel consumption figures are based on

a standard driving cycle in accordance with EU

Directive 80/1268 comb.

Fuel consumption figures may be altered if the

car is equipped with extra equipment that

affects the car’s weight. The manner in which

the car is driven and other non-technical factors

can also affect fuel consumption.

Consumption is higher and power output lower

when driving using fuel with an octane rating

of 91 RON.

Important!

Refuel with correct petrol!

Your car has a catalytic converter. Only drive

with unleaded petrol so as not to damage the

catalytic converter.

Recommended fuel grade

Petrol

The engine can be run with octane ratings of

91, 95 and 98 RON.

When driving in temperatures above +38 ºC,

use of fuel with the highest possible octane

rating is recommended for optimum performan-

ce and fuel economy.

· 98 RON is recommended for maximum

effect and minimum fuel consumption.

· 95 RON can be used for normal driving.

· 91 RON must not be used in 4-cylinder

engines and, in general, should only be used

as an exception. However, the engine will

not be damaged by this fuel grade.

Petrol: Standard EN 228

Important!

Diesel fuels not to be used: special additives,

Marine Diesel Fuel, fuel oil, RME (Rape

Methyl Ester), vegetable oil.

These fuels do not fulfil the requirements of

EM 590 and generate increased wear and

engine damage that is not covered by the

Volvo warranty.

Diesel

Diesel: Standard EN 590

JIS K2204 or similar

165

Catalytic converter and suspension

Catalytic converter

The purpose of the catalytic converter is to

purify exhaust.

It is located in the exhaust flow near the engine

to quickly reach operating temperature.

The catalytic converter consists of a monolith

(ceramic or metal) with channels. The channel

walls are coated with a thin layer of platinum,

rhodium and palladium.The metals act as

catalysts, i.e. they accelerate the chemical

process without being used up themselves.

2501523

Lambda-sond

Heated oxygen sensor

The lambda sensor is part of a management

system intended to reduce emissions and

improve fuel economy.

An oxygen sensor monitors the oxygen content

of the exhaust gases leaving the engine. These

values are fed into an electronic system that

continuously controls the injectors. The ratio of

air to fuel is continuously adjusted.

These adjustments create optimal conditions for

efficient combustion, and together with the three-

way catalytic converter reduce harmful emis-

sions (hydrocarbons, carbon monoxide and

nitrous oxides).

Wheel suspension, springing

Front end

McPherson type spring strut. Unitary construc-

tion of shock absorbers and spring. Rack and

pinion steering. Safety type steering shaft. The

values apply to an unladen car with full tank,

coolant and spare wheel.

Rear suspension

Independent suspension with individually

sprung wheels with shock absorbers. The

suspension consists of rear-facing trailer arms,

upper and lower control arms, track rods and

anti-roll bar.

166

Electrical system

General

12-volt system with voltage regulated alterna-

ting current generator. Single pole system in

which the chassis and engine block are used as

conductors.The negative pole is connected to

the chassis. The car is equipped with an extra

ground lead to reduce the magnetic fields.

Battery

Voltage 12 V 12 V 12V

Cold start capacity 520 A 600 A 800 A*

(CCA)

Reserve capacity (RC) 100 120 170

min min min

* Cars equipped with diesel and parking heater.

If the battery is changed, replace it with a

battery of the same cold start capacity and

reserve capacity as the original

(see the decal on the battery).

Generator max current 140 A

Starter motor, power 1,4/1,7/2,2 kW

Bulbs

Bulbs Type (LL) Socket

3501808d

1234 5

67 9810

1. Main beam /

dipped beam H7 55W

2. Bi-Xenon D2R35W

3. Front fog lamp H1 55W

4. Parking lamp (front),

side marker lamp

(rear) W5W W2.1x9.5d

4. Side marker lamp

(front)* W3W W2.1x9.5d

5. Direction

indicator (front) PY21W BAU 15s

6. Direction

indicator (side) WY5W W2.1x9.5d

7. Reversing lamp,

direction indicator

(rear) P21W BA15s

8. Rear fog lamp,

parking lamp (rear) P21/4W BAZ15d

9. Rear parking lamp R5W BA15s

10. Numberplate

lighting, courtesy

lighting (front) cargo

compartment lighting C5W SV8.5

11. Vanity mirror 1.2W SV5.5

4. Courtesy lighting

(rear) W5W W2.1x9.5d

*S80 Graphite Edition (white lens): WY5W

(yellow lamp), W2.1x9.5d.

167

Audio

Overview, Stereo HU-450 168

Overview, Stereo HU-650 169

Overview, Stereo HU-850 170

Audio functions 171

Radio functions 173

Cassette player 180

CD player 181

Dolby Surround Pro Logic II 184

Technical data - Audio 186

168

Stereo HU-450

7. Navigation buttons -

CD/radio - seek/change station or

track Cassette - Fast forward/rewind,

select next/previous track

8. Display

9. FM - Shortcut

10. AM - Shortcut

11. TAPE - Shortcut

12. AUTO - Automatic preset of radio stations

13. BASS - Press out and turn

TREBLE - Press out, pull and turn

14. Cassette - Direction select

CD changer

(option) - Random

15. Cassette opening

16. Cassette opening

1. POWER (Off/On) - Press Volume -

Turn

2. PRESET/ CD PUSH MENU -

Stored radio stations

CD changer (option)

3. SOURCE PUSH MENU -

Open the main menu -

Press Turn to select: Radio -

FM, AM Cassette

CD changer (option)

4. FADER - Press out and turn

BALANCE - Press out, pull and turn

5. SCAN - Automatic station search

6. EXIT - Scroll back in the menu

HU-450

3905005d

169

Stereo HU-650

1. POWER (Off/On) - PressVolume - Turn

2. PRESET/ CD PUSH MENU -

Stored radio stations

CD changer (option)

3. SOURCE PUSH MENU - Open the

main menu - Press Turn to select:

Radio - FM, AM

Cassette

CD changer (option)

4. FADER - Press out and turn

BALANCE - Press out, pull and turn

5. EXIT - Scroll back in the menu

6. SCAN - Automatic station search

7. Navigation buttons - seek/change

station or track

3905004d

HU-650

DIGITALAUDIO

COMPACT

8. CD eject

9. CD slot

10. CD random

11. FM - Shortcut

12. AM - Shortcut

13. CD - Shortcut

14. AUTO - Automatic preset of radiostations

15. BASS - Press out and turn

TREBLE - Press out, pull and turn

16. Cassette - Direction select

CD changer (option) - Random

17. Cassette opening

18. Cassette eject

170

Stereo HU-850

1. POWER (Off/On) - Press

VOLUME - Turn

2. BASS - Press out and turn

TREBLE - Press out, pull and turn

3. FADER - Press out and turn

BALANCE - Press out, pull and turn

4. Centre volume - Press out and turn

Output level - Press out, pull and turn

5. PRESET/ CD PUSH MENU -

Stored radio stations

CD changer (option)

6. SOURCE PUSH MENU -

Open the main menu - Press

Turn to select:

Radio - FM, AM

CD changer (option)

7. EXIT - Scroll back in the menu

8. SCAN - Automatic station search

9. Navigation buttons - seek/change station

or track

10. CD eject

11. Dolby Pro Logic II

12. 2-channel stereo

13. 3-channel stereo

14. CD slot

15. CD random

16. AM - Shortcut

17. FM - Shortcut

18. CD - Shortcut

19. AUTO - Automatic preset of radio

stations

20. Display

HU-850

DIGITALAUDIO

COMPACT

3905006d

171

Audio functions HU-450/650/850

3902418d

Bass

Set the bass by pressing out the button and

turning to right or left. In the centre position the

volume is “normalised”. Press the button back

to original position after setting.

Treble

Set the treble by pressing out the button, pull it

further out and turn it left or right. In the centre

position the volume is “normalised”. Press the

button back to original position after setting.

3901856d

On/Off switch

Press button to switch the radio on or off.

Volume control

Turn the knob clockwise to increase volume.

Volume control is electronic and does not have

an end stop. If you have a keypad in the

steering wheel, increase or decrease volume

with the + or - buttons.

Volume control - TP/PTY/

NEWS

If a cassette or a CD is playing when the radio

receives traffic information, news, or a selected

programme type, the function is interrupted,

and the message will be heard

at the pre-set volume for traffic information,

news or programme type. Volume is adjusted

with the volume control.

The unit will thereafter return to the previously

set volume and continue playing the cassette or

the CD.

172

3901858d

Audio functions HU-450/650/850

Fader  Balance front/rear

Set a suitable balance between the front and rear

loudspeakers by pressing out the button and

then turning it to the right (sound to front) or to

the left (sound to the rear). Centre position

means that the balance is “normalised”. Press

the button back to its original position after

setting.

3905008m

3905063m

3905009m

Balance  Balance right/left

Set the balance by pressing, pulling out the

button and turning to right or left. In the centre

position the volume is “normalised”. Press the

button back to its original position after setting.

Selection of sound source

There are two ways to select sound source:

Either with the shortcut keys (AM, FM

CD (HU-650/850), TAPE (HU-450)) or with

the SOURCE knob.

Turn the SOURCE knob to select FM or AM.

This knob can also be used to select

cassette (HU-450/650), CD (HU-650/850) or

CD changer (option) if connected.

The selected sound source is shown in the

display.

173

Radio functions HU-450/650/850

Steering wheel keypad

If you have a keypad in the steering wheel,

press the right or left arrow to select preset

stations.

NOTE! If the car is equipped with an

integrated telephone, the steering wheel

keypad can only be used for telephone

functions when the telephone is activated.

When in active mode, telephone information

is always shown in the display. Deactivate

the telephone by pressing

Switch off the telephone if you do not have an

SIM card. See page 190.

3901873d

Station search

Press or to seek lower or higher

frequencies. The radio searches for the next

audible station and then stops.

Press the button again to continue the search.

Manual tuning

Press and hold or . MAN is shown on the

display. The radio slowly scrolls in the desired

direction, increasing its tempo after a few

seconds. Release the button when the desired

frequency shows in the display.

The frequency can then be adjusted by briefly

pressing one of the arrow keys

or .

Manual adjustment mode stays in effect five

seconds after the last press.

Scanning

Press the SCAN button to start the search.

When the radio finds a station, it stops scanning

for a 10 seconds. It then resumes scanning.

To listen to the station, press the SCAN or

EXIT button.

3905010m

174

Radio functions HU-450/650/850

Programming stations

1. Set the desired frequency.

2. Briefly press the PRESET/CD knob.

Select a number by turning forwards or

backwards. Press again to store the desired

frequency and station.

Preset

To select a preset radio programme, turn the

PRESET/CD to the stored number. The set

programme is displayed.

3905009m

3905007d

Autostoring stations

This function automatically seeks and stores up

to 10 strong AM or FM stations in a separate

memory. The function is especially useful in

areas in which you are unfamiliar with the radio

stations or their frequencies.

1. Select radio mode using the AM or FM

button.

2. Start the search by pressing and holding

AUTO (more than 2 seconds).

3 AUTO is shown on the display and a

number of strong stations (max. 10) from

the set frequency band are saved in the

autostore memory.

If there are no stations with sufficient signal

strength, NO STATION is displayed.

4. Briefly press the AUTO button or one of

the arrows of the steering wheel keypad to

scroll to another of the automatically preset

stations.

AUTO is shown on the display when the radio

is in autostore mode.

The text disappears when you return to

ordinary radio mode.

Return to ordinary radio mode by pressing

FM, AM or EXIT or by turning the

PRESET/CD-knob.

Returning to autostore mode:

Briefly press AUTO.

3901873d

175

Radio functions HU-450/650/850

Radio Data System - RDS

RDS is a system that links specific network

transmitters. It is used, for example, to tune the

correct frequency of a station irrespective of the

transmitter or the active sound source

(e.g. CD). The system can also be used for

receiving traffic information and for finding

broadcasts of a specific type.

Radio text is also a component of RDS. A radio

station can transmit information about the radio

programme currently being broadcast.

Some radio stations do not use RDS or only

use a limited range of its features.

PI search (automatic station

search)

When listening to an RDS transmitter, various

information, such as traffic information, is

stored in the radio.

When a preset RDS transmitter is later selected,

the radio updates the transmitter’s RDS

information. If the radio is at the boundary or

just outside of the transmitter’s range, the radio

automatically seeks the strongest possible

transmitter of that channel.

If there is no audible transmitter, the radio

quiets and the PI SEEK appears on the display

until the station is found.

Traffic information - TP

Station

Traffic information from RDS stations

interrupts other sound sources. The message is

heard at the volume set for this specific feature.

As soon as the message ends, the audio system

returns to the previous sound source and

volume setting.

Activating traffic information:

1. Select radio mode using the FM button and

press SOURCE.

2. Select TP and press SOURCE.

3. Turn SOURCE, select TP ON (flashing

text) and press SOURCE.

4. Press EXIT.

Deactivating TP

1. Select radio mode using the FM button and

press SOURCE.

2. Select TP and press SOURCE.

3. Turn SOURCE, select TP OFF (flashing

text) and press SOURCE.

4. Press EXIT.

TP is shown on the display when the function

is activated.

Press EXIT if you do not wish to listen to a

traffic bulletin.

The TP function remains active and the radio

waits for the next traffic bulletin.

Activate traffic information from a special

channel:

1. Select radio mode using the FM button.

2. Activate the station from which traffic

information is to be received.

3. Press SOURCE.

4. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

5. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

6. Turn SOURCE, select TP STATION and

press SOURCE.

7. Turn SOURCE, select SET CURRENT and

press SOURCE.

8. Press EXIT.

Deactivating TP Station

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

4. Turn SOURCE, select TP STATION and

press SOURCE.

5. Turn SOURCE, select TP STATION OFF

and press SOURCE.

6. Press EXIT.

176

Activating News:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select NEWS and press

SOURCE.

3. Turn SOURCE, select NEWS ON (flashing

text) and press SOURCE.

4. Press EXIT.

NEWS appears on the display.

To deactivate News:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select NEWS and press

SOURCE.

3. Turn SOURCE, select NEWS OFF

(flashing text) and press SOURCE.

4. Press EXIT.

NEWS disappears from the display.

Press EXIT if you do not wish to listen to a

news broadcast.

The News function remains active and the radio

waits for the next news programme.

TP search

This function allows you to listen to traffic

information when travelling between different

areas and countries without selecting a station.

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

4. Turn SOURCE, select TP SEARCH and

press SOURCE.

5. Turn SOURCE, select TP SEARCH ON or

TP SEARCH OFF (flashing text) and press

SOURCE.

6. Press EXIT.

News

Messages with a programme code (such as

news from RDS stations) will interrupt other

sound sources at the volume set for this specific

feature. As soon as the news broadcast is

finished, the audio system returns to the

previous sound source and volume setting.

Setting the current station as news source:

1. Select radio mode using the FM button.

2. Activate the station from which traffic

information is to be received.

3. Press SOURCE.

4. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

5. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

6. Turn SOURCE, select NEWS STATION

and press SOURCE.

7. Turn SOURCE, select SET CURRENT and

press SOURCE.

8. Press EXIT.

To deactivate News Station:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

4. Turn SOURCE, select NEWS STATION

and press SOURCE.

5. Turn SOURCE, select NEWS STN OFF

and press SOURCE.

6. Press EXIT.

Radio functions HU-450/650/850

177

Programme types Displayed

OFF PTY OFF

New features News

Current affairs Current

Information Info

Sport Sport

Education Educ

Theatre Theater

Culture and Art Culture

Science Science

Entertainment Enterta

Pop music Pop

Rock music Rock

Easy listening Easy list

Light classical L Class

Classical music Classical

Other music Other M

Weather Weather

Economy Economy

For children For children

Social questions Social

Spiritual questions Spiritual

Telephone watch Telephone

Travel and holiday Travel

Leisure and hobby Leisure

Jazz music Jazz

Country music Country

National music Nation M

Golden oldies “Oldies”

Folk music Folk

Documentary Document

Radio functions HU-450/650/850

Programme type - PTY

Use the PTY function to select between the

various programme types

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select PTY and press

SOURCE.

3. Turn SOURCE, select PTY in the menu and

press SOURCE.

4. The radio begins searching for the selected

programme type.

5. If you do not wish to listen to the station

found by the radio, continue the search

using the left or right arrow key.

6. If the radio does not find a station with the

selected programme type, it returns to the

previous frequency.

Not all radio stations have a PTY designation

PTY standby

PTY mode is then in standby until the selected

programme type is broadcast. When this

happens, the radio automatically switches to the

station broadcasting the selected programme

type.

Deactivating:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select PTY and press

SOURCE.

3. Turn SOURCE, select PTY OFF and press

SOURCE.

4. Press EXIT.

The PTY symbol disappears from the display

and the radio resumes normal mode.

PTY - language

The PTY function can be used to select the

language used in the radio display (English,

German, French or Swedish).

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

and press SOURCE.

4. Turn SOURCE, select PTY LANGUAGE

and press SOURCE.

5. Turn SOURCE, select language and press

SOURCE.

6. Press EXIT.

178

Automatic frequency

updating

The AF function is normally activate and

ensures that the radio tunes to the strongest

available transmitter.

Activating AF:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select AF ON (flashing

text) and press SOURCE.

5. Press EXIT.

Deactivating AF:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select AF OFF (flashing

text) and press SOURCE.

5. Press EXIT.

EON - Local/Distant

(Enhanced Other Networks)

When EON is activated, the radio programme is

interrupted for traffic bulletins, news broadcasts

or the like from other channels.

The function has two levels:

Local - only interrupts if the signal is

strong.

Distant - also interrupts with weaker

signals.

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select EON (flashing text)

and press SOURCE.

5. Turn SOURCE, select Local or Distant and

press SOURCE.

6. Press EXIT.

Regional radio programmes

The regional function is normally deactivated.

When the function is activated you can continue

listening to a regional broadcast even if the

signal is weak.

Activating REG:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select REG LOCK

(flashing text) and press SOURCE.

5.Press EXIT.

REG appears on the display.

Deactivating REG:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RADIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select REG SWITCH

(flashing text) and press SOURCE

5. Press EXIT.

Radio functions HU-450/650/850

179

Radio functions HU-450/650/850

Resetting RDS functions

Resets all radio settings to the original factory

settings.

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select RESET TO DE-

FAULT and press SOURCE.

4. Press EXIT.

ASC (Active Sound Control)

The ASC function automatically adapts the

volume of the radio to vehicle speed.

Activating ASC:

1. Select radio mode using the FM button and

press SOURCE.

2. Turn SOURCE, select ADVANCED

MENU and press SOURCE.

3. Turn SOURCE, select AUDIO SETTINGS

MENU and press SOURCE.

4. Turn SOURCE, select ASC LEVEL and

press SOURCE.

5. Turn SOURCE select LOW, MEDIUM,

HIGH or Off and press SOURCE.

Radio text

Some RDS stations broadcast information,

such as about programme content and artists.

Hold the FM button depressed a few seconds

to access any transmitted radio text, which then

appears on the display.

After the text is shown twice, the radio once

again displays the station/frequency.

A brief press on EXIT ends the radio text

display.

180

Cassette player HU-450/650

Cassette eject

If you press the button, the tape stops and the

cassette is ejected. Turn the SOURCE knob to

select a new programme source. The cassette

can be inserted or ejected even if the system is

switched off.

Dolby B Noise Reduction

This function is preset. Do as follows to switch

it off: hold the REV button depressed until the

Dolby symbol

in the display goes out. Press

the same button again to reactivate the Dolby

function.

Scanning

Scan plays the first ten seconds of each track.

Press the SCAN or EXIT button when you

find a song or track you wish to listen to.

Fast forward/rewind

The tape is fast forwarded by pressing and

holding the

button and is rewound with the

button

. ”FF” (fast forward) or ”REW”

(rewind) is shown in the display during this

time. Fast forward/rewind is interrupted if you

press the button again.

Next track, Previous track

If you press the button, the cassette will

automatically fast forward to the next song.

If you press the button,

the cassette will

automatically rewind to the previous

song.There must be a five second break

between each track for this function to work. If

you have a keypad in the steering wheel, you

can use the arrows.

Cassette opening

Slide cassette into the cassette opening with the

tape to the right. TAPE Side A is shown in the

display. When one side has finished playing the

system will automatically begin playing the

other side (auto reverse). To play a cassette that

is already in the player, turn the SOURCE knob

or press the TAPE shortcut key (HU-450).

Changing tape direction

Press the REV button to if you wish to play

the other side of the tape. The display shows

which side is being played.

3901876d

3901857d

DOLBYBNR

3901873d

3905010m

181

CD player HU- 650

CD player

Insert a CD. If there is already a CD in the

player, activate it by turning the SOURCE knob

or pressing the CD shortcut key.

CD eject

If you press this button the CD stops playing

and the disc is ejected. (See illustration above)

NOTE! For reasons of traffic safety, you have

twelve seconds to handle the ejected disc.

Otherwise, the CD is drawn back into the player

and resumes with the most recently played

track.

Random

Press RND to connect the random function.

The unit plays tracks from the disc in random

order. “RND” (random) is displayed as long as

the function is activated.

NOTE! If the quality of the CD does not comply

with the standard EN60908, or if it has been

recorded using poor equipment, sound quality

may be poor or playback interrupted.

Fast forward/reverse and

change track

Press and hold down the right or left-hand

arrow key to fast forward/reverse a track or the

whole disc. Fast forward/reversing cannot be

done using the steering wheel keypad.

Briefly press the left or right-hand arrow key to

go to the previous or next track. The steering

wheel keypad can also be used for this. Track

numbers are shown in the display.

Scanning

Scan plays the first ten seconds of each track.

Press the SCAN or EXIT button when you

find a song or track you wish to listen to.

IMPORTANT!

Use only standard 12 cm CDs - no smaller.

Do not use CDs with a sticker label.

Heat from the CD player could cause the

label to let loose from the disc, possibly

damaging the CD player.

3901862d

3905010m

182

External CD changer

CD changer

The external CD changer (option) is mounted

behind the panel on the rear left side of the

cargo compartment.

Turn the SOURCE knob to activate CD

changer mode. The CD changer resumes

playing the disc and track that was playing last.

If the CD changer magazine is empty

“LOAD CARTRIDGE” is displayed.

Loading discs in the CD changer:

1. Slide open the CD changer cover.

2. Press the cartridge eject button on the

changer.

3. Pull out the CD cartridge and insert the

discs.

4. Reinsert the cartridge in the CD changer.

Selecting disc number

Turn the PRESET/CD knob. The numbers of

the disc and the track are shown in the display.

Fast forward/reverse and

change track

Press and hold down the right or left-hand

arrow key to fast forward/reverse a track or the

whole disc. Fast forward/reversing cannot be

done using the steering wheel keypad.

Briefly press the left or right-hand arrow key to

go to the previous or next track. The steering

wheel keypad can also be used for this. Track

numbers are shown in the display.

Scanning

Scan plays the first ten seconds of each track.

Press the SCAN or EXIT button when you find

a song or track you wish to listen to.

IMPORTANT!

Use only standard 12 cm CDs - no smaller.

Do not use CDs with a sticker label.

Heat from the CD player could cause the

label to let loose from the disc,

possibly damaging the CD player.

Random

Press RND (for HU-650 and 850) to activate

the Random function. If you have audio system

HU-450, use the REV button. A randomly

selected track is chosen from a randomly

selected disc. Then a new track is selected in the

same way. “RND” (random) is displayed as

long as the function is activated.

NOTE! If the quality of the CD does not comply

with the standard EN60908, or if it has been

recorded using poor equipment, sound quality

may be poor or playback interrupted.

3903125m

3905010m

183

Internal CD changer HU-850

Selecting disc number

Turn the PRESET/CD knob. The disc and track

numbers are shown on the display.

Fast forward/reverse and

change track

Press and hold down the right or left-hand

arrow key to fast forward/reverse a track or

the whole disc. Fast forward/reversing cannot

be done using the steering wheel keypad.

Briefly press the left or right-hand arrow key

to go to the previous or next track. The

steering wheel keypad can also be used for

this. Track numbers are shown in the display.

Scanning

Scan plays the first ten seconds of each track.

Press the SCAN or EXIT button when you

find a song or track you wish to listen to.

Random

Press RND to connect the random function.

A randomly selected track is chosen from a

randomly selected disc. Then a new track is

selected in the same way. “RND” (random) is

displayed as long as the function is activated.

NOTE! If the quality of the CD does not comply

with the standard EN60908, or if it has been

recorded using poor equipment, sound quality

may be poor or playback interrupted.

Internal CD changer

HU-850 contains an internal 6-disc CD

changer.

Press the CD shortcut key or turn the SOUR-

CE knob to activate the CD player. The CD

player resumes with the most recently played

track of the most recently played CD. Up to 6

discs can be inserted in the CD player. An

empty slot in the player must be selected when

inserting a disc.This is done by turning the

PRESET/CD knob. Make sure ”LOAD DISC”

is displayed before inserting a new disc.

CD eject

If you press this button the CD stops and the

disc that was playing is ejected.

NOTE! For traffic safety reasons you have

twelve seconds to handle the ejected CD.

Otherwise, the CD is drawn back into the

player and resumes with the most recently

played track.

IMPORTANT!

Use only standard 12 cm CDs - no smaller.

Do not use CDs with a sticker label.

Heat from the CD player could cause the

label to let loose from the disc,

possibly damaging the CD player.

3901862d

3905010m

184

Dolby Surround Pro Logic II HU-850

Dolby Surround Pro Logic II

Mode

To select Dolby Surround Pro Logic II Mode,

press “

PL II”. “PL II” is shown on the

display. “Dolby Pro Logic” is displayed. Press

OFF to return to 2-channel stereo.

Dolby Surround Pro Logic II

Dolby Surround Pro Logic II is a further refi-

nement of the previous system and provides a

significantly improved sound experience. This

improvement is especially noticeable to rear

seat passengers.

Dolby Surround Pro Logic II together with a

centre speaker in the dashboard offers a sound

experience very close to being there.

The normal left-right stereo channels are

divided into left-centre-right. In addition,

surround sound is produced by the rear

speakers. Dolby Surround Pro Logic II works

in CD mode. 3-channel stereo (3-CH) is

recommended for AM and FM radio transmis-

sions.

3-channel stereo

To select 3-channel stereo press “3-CH”.

“3-CH” is displayed. Press OFF to return

to 2-channel stereo.

3901877d

3905088d

185

Centre loudspeaker volume

Set the centre loudspeaker volume by pressing

out the button and turning it left or right. In

the centre position the volume is “normalised”

Press the button back after setting.

Rear loudspeaker output

level (surround sound)

Set the power output of the rear channels by

pressing out the button, pulling it further out

and turning it left or right. In the centre position

the power output is “normalised”. Press the

button back after setting. The control regulates

the surround sound level when listening in

Dolby Surround Pro Logic II mode.

Dolby Surround Pro Logic II HU-850

3902419d

186

Technical data - Audio

Alarm

“Alarm!” is shown in the radio display when an alarm message is

transmitted. The function is used to warn the driver of serious

accidents or catastrophes, such as collapsed bridges, earthquakes or

nuclear accidents.

Dolby Noise Reduction is manufactured under license of Dolby

Laboratories Licensing Corporation. Dolby and the double D

symbol

are trademarks of Dolby Laboratories Licensing

Corporation.

HU-450

Output: 4 x 25 W

Impedance: 4 Ohm

Voltage required: 12 V, negative ground

Radio

Frequency: U (FM) 87.5 - 108 MHz

M (AM) 522 - 1611 kHz

L (AM) 153 - 279 kHz

HU-650

Output: 4 x 25 W

Impedance: 4 Ohm

Voltage required: 12 V, negative ground

External amplifier: 4 x 50 W or 4 x 75 W (option)

Radio

Frequency: U (FM) 87.5 - 108 MHz

M (AM) 522 - 1611 kHz

L (AM) 153 - 279 kHz

Bass speaker

Built-in amplifier: 150 W

HU-850

Output: 1 x 25 W (Centre speaker)

Impedance: 4 Ohm

Voltage required: 12 V, negative ground

External amplifier: 4 x 50 W or 4 x 75 W (option)

HU-850 must be connected to an external amplifier.

Radio

Frequency: U (FM) 87.5 - 108 MHz

M (AM) 522 - 1611 kHz

L (AM) 153 - 279 kHz

Dolby Surround Pro Logic II is a registered trademark of Dolby

Laboratories Licensing Corporation. Manufacturing rights for Dolby

Pro Logic Surround System are licensed from Dolby Laboratories

Licensing Corporation.

Low battery voltage

If battery voltage is low, a text appears in the combined instrument

panel display. The energy economy function of the car may switch off

the radio.Charge the battery by starting the engine.

187

Telephone (option)

Telephone system 188

Operating 190

Call options 191

Memory functions 194

Menu functions 195

Miscellaneous information 199

188

Telephone

General rules

· Put traffic safety first! If you as the

driver must use the privacy handset

in the armrest, park the car in a safe

place.

· Switch off the telephone when

refuelling.

· Switch off the telephone in areas

where blasting work is being carried

out.

· Only allow authorised personnel

service your telephone.

5. SIM card

All telephone functions can be controlled via

the keypad in the centre console. The majority

of telephone functions can be controlled via the

steering wheel keypad. The SIM card is

inserted below the keypad in the centre console.

Switch off the telephone whenever a SIM card

is not in use. Otherwise, messages from other

functions cannot be shown on the display.

6. Microphone

The microphone is built into the rearview

mirror.

7. Speaker

The speaker is integrated in the driver’s seat

head restraint.

8. Antenna

The antenna is mounted against the windscreen

in front of the rearview mirror.

1. Keypad in centre console

All telephones system functions can be

controlled from the keypad in the centre

console.

2. Steering wheel keypad

The keypad in the steering wheel can be used

for most telephones system functions.

When the telephone is activated, the keypad in

the steering wheel can only be used for telephone

functions. When in active mode, telephone

information is always shown in the display.

To use the buttons for radio settings, the

telephone has to be deactivated, see page 190.

3. Display

The display shows menu functions, messages,

telephone numbers, etc.

4. Privacy handset

The privacy handset can be used for private

conversations when you do not wish to be

disturbed.

Emergency calls

Emergency calls to emergency services

can be made without the ignition key or

the SIM card.

· Press the ON/OFF button.

· Ring the emergency number that

applies to your region

(within EU: 112).

· Press the green button

Telephone system

189

Telephone

3903012m

190

Telephone

Active mode

The telephone must be in active mode to use its

functions (does not apply to receiving calls).

Activate the telephone by pressing

on the

centre console keypad or the keypad in the

steering wheel.

When in active mode, telephone information is

always shown in the display.

Press

to deactivate the telephone.

Switching the telephone on and off

To switch the telephone on: turn the ignition key

to position I. Press the button marked in the

illustration

To switch the telephone off: press the same

button for approx. 3 seconds. If you switch off

the car while the telephone is on, it will be on

the next time you switch on the ignition.

Telephone calls cannot be received if the

telephone is switched off.

Operating

3903019m

3903022

SIM card

The telephone can only be used in conjunction

with a valid SIM card (Suscriber Identity

Module). Obtain the card from your service

provider.

Always insert the SIM card to use the

telephone. The name of your service provider

will then be displayed.

Switch off the telephone whenever a SIM card

is not in use. Otherwise, message from other

functions cannot be shown on the display and

the keypad cannot be used to control the radio.

3902219d

191

Telephone

Making and receiving calls

To place a call: enter the number and press

on the steering wheel or centre console keypad

(or lift up the handset).

To receive an incoming call: Press the button

(or lift the privacy handset). You can also use

Automatic answer, see menu function 4.3.

The audio system is automatically muted during

conversation. See menu alternative 5.6.5

regarding audio system volume.

Ending a call

To conclude a call, press on the steering

wheel or centre console keypad or put the

handset back in place. The audio system will

resume its previous activity.

Call options

Display

The display shows the current function, such as

menu alternative, message, telephone number,

or setting.

3800670d

3902219d

3902220d

192

Telephone

Privacy handset

If you wish to talk undisturbed, use the privacy

handset.

1. Pick up the handset. Enter the chosen

number on the centre console keypad.

Press to place a call. Adjust the

volume by using the knob on the side of

the handset.

2. The call is terminated when you replace

the handset in its holder. If you wish to

change to handsfree without ending the call:

press

and select Handsfree. Press

and put down the handset, see the following

page.

Speed dial

Storing speed dial numbers

A number stored in the telephone book can be

linked to a speed dial button (0-9) as follows:

1. Go into active mode. Scroll with

to Edit

memory (Menu 3) and press .

2. Scroll to Speed dial (Menu 3.4) and

press

3. Choose the digit that is to be the speed dial

number. Press

to confirm.

4. Find the desired name or telephone number

in the memory and press

to select it.

Using speed dial

Press the desired speed dial button for about

2 seconds to make a call.

NOTE! When you turn on the telephone, wait

a moment before using the speed dial function.

To enter a speed dial number, Menu 4.5 must

be activated, see page 196.

Call options (cont.)

3902215d

Last number called

The telephone automatically stores the last

telephone numbers/names called.

1. Press

on the steering wheel or centre

console keypad.

2. Use the arrows to scroll forward

backward through the last numbers

called.

3. Press

(or lift the privacy handset) to

make the call.

3902219d

193

Telephone

Functions during a call

The following functions are available during

a call (scroll with arrows):

Secret mode/ Secret mode

Secret mode off

Hold/No hold Choose if the present

call is to be parked, i.e.

put on hold

Handset/

Handsfree Use the handset or

handsfree

Memory Show stored numbers

The following functions are available when you

have a current call and a parked call (scroll

with arrows):

Secret mode/ Secret mode

Secret mode off

Handset/

Handsfree Use the handset or

handsfree

Memory Show stored numbers

Three-way calling Speak with both parties

simultaneously

(conference call)

Switch Switch between the two

calls

Volume

Increase volume by pressing on the (+) button

on the steering wheel keypad. Reduce volume

by pressing on the (-) button.

When the telephone has been activated, the

steering wheel keypad can only be used for

telephone functions.

To use this keypad for radio settings the

telephone has to be deactivated, see page 190.

The following functions are available during

three-way calling (scroll with arrows):

Secret mode/ Secret mode

Secret mode off

Handset/

Handsfree Use the handset or

handsfree

Memory Show stored numbers

Call waiting

If you hear a beep in your receiver followed

immediately by two beeps (double beep) during

a phone call, someone else is calling.

The double beep is then repeated until you

either answer or the caller hangs up.

In this mode, you can choose to either take the

call or ignore it.

If you do not wish to take the call, press

or do nothing.

If you do wish to take the call, press

Your current call will be put in “park mode”.

If you press

, both calls will be terminated.

SMS

A double beep informs you that a SMS-

message has been received.

3902223d

194

Telephone

Calling from the memory

1. Press .

2. Choose from the following alternatives:

· Press and scroll with the arrows

until you find the desired name.

· Press the key of the first letter in the

name (or enter the name) and press

3. Press

to call the selected number.

Memory functions

Telephone numbers and names can be stored

in either the telephone memory or the SIM card

memory.

If the number of the person calling is in the

memory, their name is shown in the display.

Up to 255 names can be stored in the telephone

memory.

Storing telephone

numbers with names

1. Press and scroll to Edit memory

(Menu 3) and press

2. Scroll to Enter item in memory (Menu 3.1)

and press

3. Enter a number and press

4. Enter a name and press

5. Choose in which memory to save with

and press .

space 1- ? ! , . : ’ ( )

a b c 2 ä å à á â æ ç

d e f 3 è é ë ê

g h i 4 ì í î ï

j k l 5

m n o 6 ñ ö ò ó Ø

p q r s 7 ß

t u v 8 ü ù ú û

w x y z 9

if you enter two letters in a row from

the same button, press * between them

or wait a few seconds

+ 0 @ * # & $ £ / %

change between capital and lower case

letters

delete the last letter or number entered.

If you press the button for a long time,

the entered number or text is deleted.

Enter a name (or message)

Press the button with the desired character:

once for the first character, twice for the

second, etc. Press 1 to enter a space.

3902221d

195

Telephone

Menu functions

The menu function is used to check and alter

settings and programme new functions in your

system. The different menus are shown in the

display.

Menu function

Go into active mode. Press to come to the

menu function.

The following applies in the menu function:

· A long press on means you exit the

menu function.

· A short press on means that you retract,

cancel or reject an alternative.

· A press on means that you confirm or

select, or that you scroll from a submenu

to the next submenu.

· The right arrow leads to the next side

menu. The left arrow

leads to the

previous side menu.

Traffic safety

For reasons of safety, the menu system cannot

be accessed at speeds in excess of 8 km/h

(5 mph). You may only complete activities in

the menu system that have already been started.

The speed limiter can be disconnected using

menu function 5.7.

Shortcuts

When you use the right arrow to enter the

menu system, you can use numbers instead of

the arrows and the green button

to select the

right menu on the main menu level (1, 2, 3,

etc.), first submenu level (1.1, 2.1, 3.1, etc.)

and the second submenu level (1.1.1, 2.1.1,

etc.). The numbers are shown in the display

together with the menu alternative.

3902222d

196

Telephone

Main menus/submenus

1. Call register

1.1 Missed calls

1.2 Received calls

1.3 Dialled calls

1.4 Erase list

1.4.1 All

1.4.2 Missed

1.4.3 Received

1.4.4 Dialled

1.5 Call duration

1.5.1 Last call

1.5.2 Number of calls

1.5.3 Total time

1.5.4 Clear

2. Messages

2.1 Read

2.2 Write

2.3 Voice message

2.4 Settings

2.4.1 SMSC number

2.4.2 Validity

2.4.3 Type

3. Edit memory

3.1 Enter item

3.2 Search

3.2.1 Edit

3.2.2 Erase

3.2.3 Copy

3.2.4 Move

3.3 Copy all

3.3.1 SIM to phone

3.3.2 Phone to SIM

3.4 Speed dial

3.5 Empty SIM

3.6 Empty memory

3.7 Status

4. Call options

4.1 Transmit numbers

4.2 Call waiting

4.3 Automatic answer

4.4 Automatic dial

4.5 Speed dial

4.6 Call divert service

4.6.1 All calls

4.6.2 When busy

4.6.3 When not answered

4.6.4 If unreachable

4.6.5 Fax calls

4.6.6 Computer calls

4.6.7 Cancel all diverts

5. Settings

5.1 Factory settings

5.2 Network selection

5.3 Language

5.3.1 English UK

5.3.2 English US

5.3.3 Svenska

5.3.4 Dansk

5.3.5 Suomi

5.3.6 Deutsch

5.3.7 Nederlands

5.3.8 Français FR

5.3.9 Français CAN

5.3.10 Italiano

5.3.11 Español

5.3.12 Português P

5.3.13 Português BR

5.4 SIM security

5.4.1 On

5.4.2 Off

5.4.3 AUTO

5.5 Change codes

5.5.1 PIN code

5.5.2 Telephone code

5.6 Volume

5.6.1 Ringer volume

5.6.2 Ringer tone

5.6.3 Button click

5.6.4 Speed volume

5.6.5 Radio Auto Suppression

5.7 Traffic safety

197

Telephone

Menu 1. Call register

1.1 Missed calls: A list of missed calls is

shown here. You can choose to call, erase or

store the number in the telephone or SIM card

memory for later use.

1.2 Received calls: A list of received calls is

shown here. You can choose to call, erase, or

store the number in the telephone or SIM card

memory for later use.

1.3 Dialled calls: A list of dialled numbers is

shown here. You can choose to call, erase, or

store the number in the telephone or SIM card

memory for later use.

1.4 Erase list: This option can be used to

erase the list of menus 1.1, 1.2 and 1.3 as

follows.

1.4.1 All

1.4.2 Missed

1.4.3 Received

1.4.4 Dialled

1.5 Call duration: Here you can see the

duration of all your calls or the most recent.

You can also choose to see the number of calls

and clear the call timer.

1.5.1 Last call

1.5.2 Number

1.5.3 Total time

1.5.4 Clear timer

The telephone code is needed to clear the call

timer (see Menu 5.5).

Menu 3. Edit memory

3.1 Enter item: You can store names and

telephone numbers in the telephone or SIM

card memory. See the section on memory

functions for more information.

3.2 Search: Changes in the memory can be

made here.

3.2.1 Edit: Change data in the different

memories.

3.2.2 Erase: Remove a saved name.

3.2.3 Copy: Copy a saved name.

3.2.4 Move: Transfer information between

the memory of the telephone and the SIM

card.

3.3 Copy all: Copy the telephone numbers and

names on the SIM card to the telephone's

memory.

3.3.1 From SIM to telephone memory

3.3.2 From Telephone to SIM memory

3.4 Speed dial: A number stored in the

telephone book can be stored as a speed dial

number.

3.5 Empty SIM: The entire memory of the

SIM card can be erased.

3.6 Empty memory: The entire memory of the

phone can be erased.

3.7 Status: See how many places in the SIM

card or telephone memory are occupied by

names and numbers.

Menu 2. Messages

2.1 Read: Here you can read received text

messages. You can then choose to erase the

last message, forward it, change or save the

entire message or parts of it.

2.2 Write: Using the keypad, you can write a

text message. Then choose to save or send it.

2.3 Voice massage: Listen to received

messages.

2.4 Settings: Enter the number (SMSC

number) of the message centre you wish to

have transfer your messages. Specify also how

the message is to reach the addressee and how

long it is to be stored in the message centre.

2.4.1 SMSC number

2.4.2 Validity

2.4.3 Type

Contact your service provider for information

about these settings and the SMSC number.

198

Telephone

Menu 4. Call options

4.1 Transmit number: Choose whether or not

to display your number to the person you call.

Contact your service provider for a permanently

concealed number.

4.2 Call waiting: Choose whether or not you

want to be alerted during a phone call that there

is another call coming in.

4.3 Automatic answer: Chose to answer

without using the keypad.

4.4 Automatic redial: Choose to call a

previously dialled number that was busy.

4.5 Speed dial: Here you set whether or not

speed dial is to be activated. In order to use

speed dial, the function must be activated

4.6 Call divert service: Here you can choose

when and what type of calls are to be diverted

to a specified telephone number.

4.6.1 All calls (this setting only applies

during the current call).

4.6.2 When busy

4.6.3 When not answered

4.6.4 If unreachable

4.6.5 Fax calls

4.6.6 Computer calls

4.6.7 Cancel all diverts

Menu 5. Settings

5.1 Factory settings: Function to return to

the system’s factory settings.

5.2 Network selection: Choose a network

automatically or manually.

5.2.1 Auto

5.2.2 Manual

5.3 Language: Here you can choose which

language the telephone is to display.

5.3.1 English UK

5.3.2 English US

5.3.3 Svenska

5.3.4 Dansk

5.3.5 Suomi

5.3.6 Deutsch

5.3.7 Nederlands

5.3.8 Français FR

5.3.9 Français CAN

5.3.10 Italiano

5.3.11 Español

5.3.12 Português P

5.3.13 Português BR

5.4 SIM security: Choose if the PIN code is to

be on, off, or automatic.

5.4.1 On

5.4.2 Off

5.4.3 Auto

5.5 Change codes: Change the PIN code or

telephone code.

5.5.1 PIN code

5.5.2 Telephone code (use 1234 before

you change to a personal code).

The telephone code is used to clear

the call timer.

NOTE! Make a note of the code and store it in

a safe place.

5.6 Volume

5.6.1 Ringer volume: Here you can

choose the volume of the ringer for

incoming calls.

5.6.2 Ringer tone: There are eight

different ringer tones to choose

from.

5.6.3 Button click: On or off

5.6.4 Speed volume: Choose whether the

volume should be adjusted

according to speed.

5.6.5 Radio Auto Suppression: Here you

choose whether the volume of the

radio should remain the same during

telephone calls.

5.6.6 New SMS: Choose whether you

want the telephone to signal an

incoming SMS or not.

5.7 Traffic safety: Here you can choose to

disengage the speed limiter for the menu

system, i.e. choose to use the menu system

even while driving.

199

Telephone

Specifications

Output 2W

SIM card small

Memory positions 255*

SMS (Short Message Service) Yes

Computer/Fax No

Dual band Yes

(900/1800)

* 255 memory positions in the telephone

memory. The number of memory positions on

the SIM card varies depending on your

subscription.

IMEI number

To block the telephone, inform the service

provider of the telephone IMEI number. This is

a 15 digit serial number programmed in the

telephone. Dial *#06# to display this number.

Write down the number and store it in a safe

place.

Double SIM card

Many service providers offer double SIM cards,

one for the car and a second one for another

telephone. Double SIM cards give you the

same number for two separate telephones. Ask

your service provider about the possibilities and

offers available regarding double SIM cards.

Radio - Telephone

The four lowest buttons in the steering wheel

keypad are for both radio and telephone.

If you wish to control telephone functions with

these buttons, you must first activate the

telephone; see page 188. If you wish to adjust

the radio settings with these buttons, exit the

telephone active mode. Press

Miscellaneous information

3903022

3902239d

200

201

BLIS (Blind Spot Information

System) ................................................113

Bonnet .................................................145

Booster battery ......................................99

Booster cushion .................................... 28

Brake fluid ..........................................151

Brake system .............................. 110, 111

Bulbs ...................................................166

Call options.........................................191

Car washes ...........................................141

Cargo compartment .............................. 71

Cassette player ....................................180

CD changer .........................................182

CD player ................................... 181, 183

Changing bulbs ..................................131

Changing wheels ................................122

Children in the car -

seating locations ................................... 27

Cigarette lighter socket ........................ 47

Cleaning the seat belts .......................141

Cleaning the upholstery .....................141

Climate control with

air conditioning (AC) ............................ 60

Coat hanger ........................................... 73

Colour code ......................................... 139

Combined instrument panel .................. 32

Cruise control........................................41

Current fuel consumption..................... 40

ABS .....................................................110

AC.......................................................... 60

Activating the alarm .............................. 83

Active mode ........................................ 190

Actual temperature - ECC ...................... 55

Air distribution ................................. 54, 61

Air quality sensor .................................. 57

Air vents ................................................ 54

Alarm .............................................. 83, 186

Anti-lock brakes (ABS) ....................... 111

Audio system ...................................... 167

AUTO DOWN ....................................... 48

AUTO UP .............................................. 48

AUTO ..................................................... 57

AUTO (climate control ECC) ............... 58

AUTOUP/DOWN (power windows)...... 48

Autodim ................................................ 49

Automatic gearbox ......................... 92, 93

Automatic gearbox with manual

positions (Geartronic) .....................94, 95

Automatic relocking ............................. 80

Average fuel consumption.................... 40

Axle load .............................................157

Battery (jump start) ............................... 99

Battery care ................................ 152, 153

Battery .................................................144

Bird droppings ....................................140

D Drive .................................................. 92

Dashboard - LHD .................................... 2

Dashboard - RHD .................................... 3

Deactivating deadlocks ........................ 81

Deactivating the alarm .........................83

Deadlocks.............................................. 81

Defroster ..........................................58, 61

Diesel fuel filter ..................................147

Diesel ...................................... 45, 88, 147

Dimensions and weights .....................157

Direct start of heater .............................. 63

Direction indicators .............................. 43

Dolby Pro Logic Surround Sound ......184

Door mirror defroster ............................ 46

Double SIM card .................................199

Drive position ....................................... 45

Driving with trailer ..................... 100-103

DSTC ..................................................... 35

ECC ....................................................... 58

Electric cooling fan ................... 145, 146

Electric socket....................................... 47

Electronic Climate Control (ECC) ....... 56

Emergency calls ..................................188

Emergency stop (power seat) ................ 68

Engine - Specifications.............. 158, 159

Engine compartment ................. 145, 146

Index

202

Manual child safety locks .................... 82

Manual climate control with

air conditioning (AC) .....................53, 60

Manual gearbox .................................... 91

Master key ............................................. 78

Mechanical child safety locks .............82

Minor stone chips and scratches ........139

Mirrors ................................................... 49

Misting on window interiors ................ 55

Mounting ..............................................72

Multifilter.............................................. 57

N Neutral ............................................... 92

Oil pressure ...........................................36

Open boot lid ........................................ 94

Opening the fuel filler flap ................... 88

P Parking ............................................... 92

Paintwork damage ..............................139

Paintwork ............................................139

Parking brake engaged ......................... 36

Parking brake ........................................ 47

Petrol ...................................................164

Polishing and waxing .........................141

Engine oil ................................... 148, 149

Engine type designation ....................156

Environmental care ...................... 55, 144

Exterior.................................................... 6

Fan .........................................................60

Fault in emission control system..........36

Fault in SRS .......................................... 36

FIX NEXT SERVICE ............................ 37

Floor support ......................................... 72

Follow-me-home lighting..................... 81

Frequency update ...............................178

Front seats ............................................. 66

Fuel filler flap........................................88

Fuel gauge ............................................. 32

Function selector .................................. 61

Gearbox type designation ..................156

Geartronic .............................................. 93

General lighting .................................... 69

Generator not charging .........................36

Handbrake ............................................. 47

Hazard warning flashers........................ 46

Headlamp washer ..................................44

Head restraints, rear ............................... 67

Heated front seats .................................. 46

Heating/Cooling ................................... 60

HU-403 ................................................167

HU-603 ................................................169

HU-803 ................................................170

Ignition switch and steering

wheel lock ............................................. 45

Immobilizer .....................................78, 90

Indicator and warning lamps .......... 33-36

Interior - LHD .......................................... 4

Interior - RHD.......................................... 5

Interior lighting .................................... 69

Jack ............................................... 72, 123

Jumpstarting .......................................... 99

Keys ....................................................... 78

Kick-down ............................................. 90

L Low gear ............................................ 92

Lifting the car......................................144

Load carrier .........................................106

Load curtain in cargo compartment ..... 71

Location of children in the car ............. 27

Locking and unlocking ........................ 79

Long load .............................................. 74

Lowering the backrest, rear .................. 74

Lowering the front passenger seat ........ 67

Index

203

Pollen filter ........................................... 55

Power seat .............................................. 68

Power steering .....................................151

Power sunroof........................................50

Power windows ..................................... 48

R Reverse .............................................. 92

Radio ...................................................167

Range to empty fuel tank ..................... 40

Reading lamps, front and rear .............. 69

Rear fog lamp ........................................36

Rear seat head restraints ....................... 67

Rear window defroster .......................... 46

Rearview and door mirrors ................... 49

Rearview mirror .................................... 49

Recirculation ........................................ 59

Recovery ............................................... 98

Refuelling ............................................. 88

Remote control ..................................... 68

Replacing remote control batteries ...... 80

Roof load.............................................157

Rustproofing .......................................138

Seat belts .........................................10, 11

Seat setting ............................................ 66

SEE MANUAL ...................................... 37

Service key ............................................ 78

SERVICE REQUIRED .......................... 37

SERVICE URGENT .............................. 37

SIM card ..............................................190

Ski hatch ...............................................74

Slippery road surfaces ........................... 89

Spare wheel .................................. 72, 121

Spare wheel ”Temporary Spare” .........121

SRS (airbags) ................................... 12-17

Start position ......................................... 45

Starting the engine................................ 88

Steering wheel adjustment ................... 43

Stone chips ..........................................139

STOP SAFELY ASAP ............................ 37

Storage compartments in the

centre console ....................................... 71

Storage................................................... 70

Suitable detergent ...............................140

Sun blind ............................................... 51

Sunroof .................................................. 50

Switches in the centre console ............. 38

Symbols ...............................................152

Telephone system ...............................188

Temperature selector .......................58, 70

Temperature........................................... 58

Temporary puncture repair .................121

”Temporary Spare”..............................121

Tool kit with towing eye ...................... 72

Tools ...................................................... 72

Total weight ........................................157

Towbar .................................................102

Towbar - detachable (mounting) ........104

Towbar - detachable (removal) ...........105

Towing equipment ..................... 102, 103

Towing................................................... 98

Traffic safety .......................................195

Trailer indicator lamp ...........................36

Trailer weight ......................................157

Trailer ..................................................101

Train weight ........................................157

Trip computer........................................40

Type designations ...............................156

Tyres .................................................... 118

Tyre dimensions ..................................118

Tyre, direction of rotation...................121

Tyre, driving characteristics ...............120

Tyre, fitting .........................................123

Tyre, air pressure .................................120

Tyre, removing .................................... 122

Tyre, tread wear indicators..................121

Unlocking boot lid with master key ....80

Vanity mirror ......................................... 69

Ventilation ............................................ 53

Index

204

VIN ......................................................156

Volvo integrated booster cushion ......... 28

Volvo Service Programme .................... 143

Warning - fault in ABS system .............34

Warning - fault in brake system ............ 34

Warning symbol in centre of

dashboard .............................................. 33

Warning triangle .......................... 72, 122

Washer fluid ........................................151

Washing ...............................................140

Wheels and tyres .................................118

WHIPS .............................................21, 22

Windscreen washer ................................ 44

Windscreen wipers ................................44

Winter tyres .........................................119

Wiper blades, replacement ..................154

Index

205

206

207

208

209

210

2006

VOLVO

OWNERS MANUAL S80

TP 7809 (English). AT 0520. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2005