pg. 1
1.
Login to the IP camera via iexplorer (not edge)
2.
Navigate to Configuration.
3.
Event - > Smart Event
4.
Line Cross Detection
• Enable Line Crossing Detection
• Enable Human and or Vehicle Detection & adjust sensitivity
• Press Save
Enabling AI Human Detection & Notifications
Knowledge Base
Text:
George Poulos
AI – Human Detection & Notifications
pg. 2
Setup Line Cross VCA
Step 2:
1. Click Draw line & on the image draw the line cross in the required area
2. Set Direction A->B or A<->B etc according to requirements
3. Press Save
- For more accurate Human Detection set the Max & Min size
(Max Size = Maximum size of human / Min Size = Minimum size of human)
pg. 3
Setting Max & Min sizes for Human detection
Step 3:
4. Click Max Size and draw a box according to the largest size of a human (you may want someone to stand in shot to do this)
5. Click Min Size and draw a box according to the largest size of a human (you may want someone to stand in shot to do this)
6. Press Save
pg. 4
Arming Schedule
Step 4:
7. Press on Arming Schedule
8. If the customer wants notifications all day you can leave as is (all blue)
9. Press Save
10. If customer wants customized time for notifications you can Delete All and colour in the times required.
11. Below Schedule will send notifications between 1800 -> 5am Mon -> Sunday
pg. 5
Setting Notification
Step 5:
12. Select Linkage Method
13. Tick “Notify Surveillance Centre”
14. Press Save
- Refer to LTS Connect quick guide on how to enable push notifications
- Youtube video push notifications: https://www.youtube.com/watch?v=d6KeExdo0z0
- We highly recommend temporarily enabling Audible warning for each camera and doing a walk through to
- make sure the function works according to requirements and adjusting settings accordingly. This will make
- the NVR beep when a human/vehicle detection is triggered. Make sure to turn off when finished.
