Installation Guide
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Vehicle Application Guide...................................................................................................................................................
Installation (Wiring Diagrams & Vehicle Wiring Reference Charts)
Type 1.................................................................................................................................................................................
Type 2.................................................................................................................................................................................
Type 3.................................................................................................................................................................................
SmartStart/XL202 Installation Notes..................................................................................................................................
Programming
Module Programming.........................................................................................................................................................
Module Reset.....................................................................................................................................................................
Hard Reset.........................................................................................................................................................................
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Parking Light Error Codes..................................................................................................................................................
Limited One-Year Consumer Warranty...............................................................................................................................
Quick Reference Guide......................................................................................................................................................
02
03
06
09
12
13
15
15
16
16
17
19
20
21
Index
® Ford and Lincoln are registered trademarks and property of their respective companies.
Important!
ŸThis product is NOT compatible with vehicles equipped with a manual transmission.
ŸThis firmware does not control the OEM alarm. The installation of a hybrid system (remote starter
and alarm combo) is highly recommended to preserve vehicle security.
The remote start system will not work if:
Ÿ The ignition is on.
Ÿ The alarm system triggered.
Ÿ The hood is open.
Ÿ The transmission is not in park (P).
Ÿ The vehicle battery voltage is too low.
Ÿ The service engine soon light is on.
The following remote start features can be
configured via the information display:
Ÿ Climate control.
Ÿ Heated seats/steering wheel.
Ÿ Runtime.
Ÿ Remote start enable/disable.
The FORD12 firmware for DBALL2 is an all-in-one door lock and override module compatible with
specific Ford and Lincoln vehicles. This guide supports the installation of a DBALL2 in Remote Start
Ready (RSR) mode. This solution offers three (3) configuration options to control your system: 3x
OEM Lock Remote Start Activation, RF System or SmartStart (all sold separately).
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle
completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to
start the vehicle from a distance.
This module can only be flashed and configured using XpressVIP at www.directechs.com or
using the Directechs Mobile application for smartphones. Refer to the Module Programming
section on page 12 for more information.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Vehicle Application Guide
Page 2
The following table lists the vehicles and features which are compatible with this product. The number assigned to each
year allows you to determine which installation type should be used for your vehicle.
Vehicles
2016
2015
2014
2013
PK-Immobilizer Bypass-Data No Key Req'd
DL-Door Lock Control
DL-Door Unlock
FOB-Control of aftermarket alarm with OEM remote
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin
SS-Factory Alarm Trigger Monitoring
ST-Brake Status (foot brake)
ST-Door Locks Status
ST-E-Brake Status
ST-Ignition Status
Ford
Edge (Smart Key)
3 3 • • • D • • • • D • D • •
F150
2 2 • • • D • • • • D • D • •
F150 (Smart Key)
2 2 • • • D • • • • D • D • •
Fusion
1 1 1 1 • • • D • • • • D • D • •
Fusion (Smart Key)
1 1 1 1 • • • D • • • • D • D • •
Fusion Hybrid
1 1 1 1 • • • D • • • • D • D • •
Fusion Hybrid (Smart Key)
1 1 1 1 • • • D • • • • D • D • •
Lincoln
MKC (Smart Key)
1 1 • • • D • • • • D • D • •
MKZ (Smart Key)
1 1 1 1 • • • D • • • • D • D • •
MKZ Hybrid (Smart Key)
1 1 1 1 • • • D • • • • D • D • •
Legend:
PK: Transponder & Immobilizer Override
DL: OE Door Lock & Alarm Controls
FOB: Sync CAN Interface w/ FOB Remote
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 3
Installation Type 1 (with OEM Remote Start)
All connectors are displayed from the wire side (unless specified otherwise).
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
3
4 1
5 2
6
(-) Trunk Release:
Gray/Yellow, pin 6
Trunk
Release
Switch
Parking Light Interrupt:
Black/Violet or
Black/Blue, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray or Yellow,
pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
MS CAN High: Tan/Black: 3
MS CAN Low: Tan: 4
142
153
164
175
186
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue or Blue,
pin 20
MS CAN Low:
Violet/Orange
or Violet,
pin 22
MS CAN High:
Gray/Orange or Orange, pin 23
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
(+)12V: White/Red, pin 13
13
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 4
Installation Type 1 (without OEM Remote Start)
All connectors are displayed from the wire side (unless specified otherwise).
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
3
4 1
5 2
6
(-) Trunk Release:
Gray/Yellow, pin 6
Trunk
Release
Switch
Parking Light Interrupt:
Black/Violet or
Black/Blue, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray or Yellow,
pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
142
153
164
5
6
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue or Blue,
pin 20
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
(+)12V: White/Red, pin 13
13
17
18
HS CAN 1 High: Tan/Black: 3
HS CAN 1 Low: Tan: 4
HS CAN 1 Low:
Gray/Blue
or Gray, pin 17
HS CAN 1 High:
Green/Orange or Green,
pin 18
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 5
Type 1 - Vehicle Wiring Reference Chart
Function Color
Pin Polarity Location Color Pins
HS CAN 1 High (w/o
OEM Remote Start)
Green 18 Data C2431 connector at gateway module. Black 24-pin
HS CAN 1 Low (w/o
OEM Remote Start)
Gray 17 Data C2431 connector at gateway module. Black 24-pin
HS CAN 2 High White/Blue or Blue 20 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 2 Low White 19 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN High (w/ OEM
Remote Start)
Gray/Orange 23 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN Low (w/ OEM
Remote Start)
Violet/Orange 22 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
12V White/Red 13 (+) C2431 connector at gateway module on OBDII connector. Black 24-pin
Trunk Release Output Gray/Yellow 6 (-) C2610 connector at trunk release switch. Black 6-pin
Parking Lights Gray or Yellow 11 (-) Located at headlight switch. Black 16-pin
Parking Lights Interrupt Black/Blue 4 Cut Located at headlight switch. Black 16-pin
HS CAN 1 High (w/o
OEM Remote Start)
Green 18 Data C2431 connector at gateway module. Black 24-pin
HS CAN 1 Low (w/o
OEM Remote Start)
Gray 17 Data C2431 connector at gateway module. Black 24-pin
HS CAN 2 High White/Blue or Blue 20 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 2 Low White 19 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN High (w/ OEM
Remote Start)
Gray/Orange 23 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN Low (w/ OEM
Remote Start)
Violet/Orange 22 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
12V White/Red 13 (+) C2431 connector at gateway module on OBDII connector. Black 24-pin
Trunk Release Output Gray/Yellow 6 (-) C2610 connector at trunk release switch. Black 6-pin
Parking Lights Gray or Yellow 11 (-) Located at headlight switch. Black 16-pin
Parking Lights Interrupt Black/Blue 4 Cut Located at headlight switch. Black 16-pin
HS CAN 1 High (w/o
OEM Remote Start)
Green/Orange 18 Data C2431 connector at gateway module. Black 24-pin
HS CAN 1 Low (w/o
OEM Remote Start)
Gray/Blue 17 Data C2431 connector at gateway module. Black 24-pin
HS CAN 2 High White/Blue or Blue 20 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 2 Low White 19 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN High (w/ OEM
Remote Start)
Gray/Orange 23 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN Low (w/ OEM
Remote Start)
Violet/Orange 22 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
12V White/Red 13 (+) C2431 connector at gateway module on OBDII connector. Black 24-pin
Power Liftgate Gray/Yellow 6 (-) C2269 connector at power liftgate switch. Black 6-pin
Parking Lights Gray 11 (-) Located at headlight switch. Black 16-pin
Parking Lights Interrupt Black/Violet 4 Cut Located at headlight switch. Black 16-pin
Lincoln MKC (Smart Key) 2015-2016
Wire Information Connector Information
Ford Fusion (Key) / Ford Fusion (Smart Key) / Ford Fusion Hybrid (Smart Key) 2013-2016
Lincoln MKZ (Smart Key) & MKZ Hybrid (Smart Key) 2013-2016
Page 6
Installation Type 2 (with OEM Remote Start)
All connectors are displayed from the wire side (unless specified otherwise).
(-) Tailgate Release:
Brown/Yellow, pin 1
1
2
Tailgate
Release
Switch
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
Parking Light Interrupt:
Black/Violet, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray, pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
MS CAN High: Tan/Black: 3
MS CAN Low: Tan: 4
142
153
164
175
186
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue, pin 20
MS CAN Low:
Violet/Orange,
pin 22
MS CAN High:
Gray/Orange, pin 23
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
(+)12V: White/Red, pin 13
13
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 7
Installation Type 2 (without OEM Remote Start)
All connectors are displayed from the wire side (unless specified otherwise).
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
Parking Light Interrupt:
Black/Violet or
Black/Blue, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray or Yellow,
pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
142
153
164
5
6
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue, pin 20
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
(+)12V: White/Red, pin 13
13
17
18
HS CAN 1 High: Tan/Black: 3
HS CAN 1 Low: Tan: 4
HS CAN 1 Low:
Gray/Blue , pin 17
HS CAN 1 High:
Green/Orange,
pin 18
(-) Tailgate Release:
Brown/Yellow, pin 1
1
2
Tailgate
Release
Switch
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 8
Type 2 - Vehicle Wiring Reference Chart
Function Color
Pin Polarity Location Color Pins
HS CAN 1 High (w/o
OEM Remote Start)
Green/Orange 18 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 1 Low (w/o
OEM Remote Start)
Gray/Blue 17 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 2 High White/Blue 20 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
HS CAN 2 Low White 19 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN High (w/ OEM
Remote Start)
Gray/Orange 23 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
MS CAN Low (w/ OEM
Remote Start)
Violet/Orange 22 Data C2431 connector at gateway module on OBDII connector. Black 24-pin
12V White/Red 13 (+) C2431 connector at gateway module on OBDII connector. Black 24-pin
Tailgate Release Output Brown/Yellow 1 (-) C4499 connector at tailgate release switch. Black 2-pin
Parking Lights Gray 11 (-) Located at headlight switch. Black 16-pin
Parking Light Interrupt Black/Violet 4 Cut Located at headlight switch. Black 16-pin
Ford F-150 (Key) / Ford F-150 (Smart Key) 2015-2016
Wire Information Connector Information
Page 9
Installation Type 3 (with OEM Remote Start)
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
3
4 1
5 2
6
(-) Trunk Release:
Gray/Yellow, pin 6
Trunk
Release
Switch
Parking Light Interrupt:
Black/Violet or
Black/Blue, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray or Yellow,
pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
MS CAN High: Tan/Black: 3
MS CAN Low: Tan: 4
142
153
164
175
186
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue or Blue,
pin 20
MS CAN Low:
Violet/Orange
or Violet,
pin 22
MS CAN High:
Gray/Orange or Orange, pin 23
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
13
(+) 12V:
Green/Red,
pin 16
(-) Ground:
Black/Gray,
pin 4
1 8
169
OBDII
Diagnostic Conn.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 10
Installation Type 3 (without OEM Remote Start)
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
10
RF
Prog. Button
LED
4
14 12
2
DBALL2
(-) Ground: Black: 14
(+) 12V: Red: 13
(-) Parking Lights Output: Brown/Red: : 12
Parking Lights Interrupt (conn. side): Orange/Red: 10
Parking Lights Interrupt (vehicle side): Yellow/Red: 11
HS CAN 2 High: Orange/Green: 5
HS CAN 2 Low: Orange/Brown: 6
(-) Trunk Release Output: Black/White: 1
3
4 1
5 2
6
(-) Trunk Release:
Gray/Yellow, pin 6
Trunk
Release
Switch
Parking Light Interrupt:
Black/Violet or
Black/Blue, pin 4
CUT
19
210
311
412
513
614
715
8
16
(-) Parking Lights:
Gray or Yellow,
pin 11
Headlight Switch
(located at headlight switch)
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
6: White/Black: (-) Hood
Note: hood pin only required on
vehicles not equipped with a
factory hood pin.
142
153
164
5
6
219
197
22
10
208
2311
2412
1
HS CAN 2 High:
White/Blue or Blue,
pin 20
HS CAN 2 Low:
White, pin 19
C2431
(Black conn. at Gateway
Module on OBDII conn.)
13
17
18
HS CAN 1 High: Tan/Black: 3
HS CAN 1 Low: Tan: 4
HS CAN 1 Low:
Gray/Blue
or Gray, pin 17
HS CAN 1 High:
Green/Orange or Green,
pin 18
(+) 12V:
Green/Red,
pin 16
(-) Ground:
Black/Gray,
pin 4
1 8
169
OBDII
Diagnostic Conn.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 11
Type 3 - Vehicle Wiring Reference Chart
Function Color
Pin Polarity Location Color Pins
HS CAN 1 High (w/o
OEM Remote Start)
Green/Orange 18 Data C2431 connector at gateway module. Black 24-pin
HS CAN 1 Low (w/o
OEM Remote Start)
Gray/Blue 17 Data C2431 connector at gateway module. Black 24-pin
HS CAN 2 High White/Blue or Blue 20 Data C2431 connector at gateway module. Black 24-pin
HS CAN 2 Low White 19 Data C2431 connector at gateway module. Black 24-pin
MS CAN High (w/ OEM
Remote Start)
Gray/Orange or
Orange
23 Data C2431 connector at gateway module. Black 24-pin
MS CAN Low (w/ OEM
Remote Start)
Violet/Orange or
Violet
22 Data C2431 connector at gateway module. Black 24-pin
Trunk Release Output Gray/Yellow 6 (-) C2610 connector at trunk release switch. Black 6-pin
12V Green/Red 16 (+) OBDII connector. Black 16-pin
Ground Black/Gray 4 (-) OBDII connector. Black 16-pin
Parking Lights Gray 11 (-) Located at headlight switch. Black 16-pin
Parking Lights Interrupt Black/Blue 4 Cut Located at headlight switch. Black 16-pin
Wire Information Connector Information
Ford Edge(Smart Key) 2015-2016
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
The optional XL202 and antenna are not included and MUST be purchased separately.
Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information.
4
4
XL202
Antenna
XOVER
SmartStart is optional and not included. It MUST be purchased separately.
SmartStart is optional and not included. It MUST be purchased separately.
Configuration Wires (Gray & White)
Connect Gray wire to (-) Ground
5 pins
D2D (4 pins, white)
4 pins
2 pins,
not used
CABLE
CABLE
The modules must be connected in a specific order. Refer to the Module Programming section for more information.
1. Use the D2D Crossover (XOVER) cable that is provided with XL202, and NOT the one in the DBALL package.
2. The modules must be connected in a specific order. Refer to the Module Programming section for more information.
The modules must be connected in a specific order. Refer to the Module Programming section for more information.
SmartStart/XL202 Installation Notes
SmartStart Revision B
RF Kit
RF Kit & PKE Combination
Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information.
RF Kit, PKE & SmartStart BT Combination
SmartStart Revision A
DBALL2
DBALL2
DBALL2
LED
Prog.
Button
D2D (4 pins, white)
4 pins
2 pins,
not used
OR
SmartStart
Configuration Wires (White & Brown or Blue)
Cut Brown or Blue Loop
LED
THIS SIDE UP
LED
The DBALL Remote Start Ready (RSR) solution offers three (3) configuration options to control your system; 3x OEM Lock
Remote Start Activation, RF Kits or SmartStart (all sold separately). This section provides specific installation information for
SmartStart and XL202.
Page 12
You have successfully completed the module programming sequence.
Module Programming
Page 13
3
Turn the ignition OFF.
For Key-type vehicles
2
Turn the ignition ON. The LED will turn ON solid green for 3 seconds,
then will turn OFF.
START
Key OUT
ON
OFF
& &
Key IN
OFF
START
I
GN
Solid green
x 3 secs
OFF
Important
10-pin
D2D
XL202
10-pin
D2D
SmartStart
OR
The DBALL module must be disconnected from any power source before SmartStart can
be connected to it. Failing to do so could damage DBALL.
a. To ensure that the D2D communication between SmartStart and DBALL works properly, the
Gray wire must be connected to a ground source (Rev B SmartStart), and the Brown or Blue
loop must be cut (Rev A SmartStart).
b. Do NOT connect the 2-pin harness (on SmartStart). Power and ground will be provided by
the DBALL D2D connector.
Connect SmartStart to DBALL using the D2D port.
SmartStart Installation
Connect XL202 to DBALL using the D2D port.
XL202 Installation
Refer to the LED Diagnostics section on page 17 for more information and for troubleshooting purposes.
Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to
ensure everything is correct prior to moving onto the next step.
Note: Before connecting either the XL202 or SmartStart module to DBALL, it is important to ensure that the proper feature and
function programming is selected using XpressVIP (version 4.5 or higher). Visit www.directechs.com to download the latest
version of the application.
Warning! To take advantage of advanced features, you must use XpressVIP 4.5 (and higher) or the Directechs Mobile app.
When the flashing operation is successful, you can proceed with the programming instructions below.
Flashing a module using your computer:
1. Connect the interface module to your computer using the
XKLoader2.
2. Go to www.directechs.com using Internet Explorer, and
select the Config for RSR button.
3. Follow the instructions to select your vehicle, installation
type, and configure your options.
4. Once you have configured the firmware options, click on the
FLASH button.
Flashing a module using your smartphone or tablet
1. Connect the interface module to your XKLoader3.
2. Launch the Directechs Mobile app on your smartphone or
tablet.
3. Select FLASH YOUR MODULE and follow the on screen
instructions.
1
10-pin
D2D
st
1
12-pin
14-pin
nd
2
rd
3
&
Solid
Connect the 10-pin, 12-pin and 14-pin harnesses to
DBALL, then wait until the LED turns ON solid red.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
You have successfully completed the module programming sequence.
2
Press the Push-to-Start (PTS) button once to turn the ignition ON. The
LED will remain ON solid green for 3 seconds, then will turn OFF.
Solid green
x 3 secs
Press x 1
ENGINE
START
STOP
&
OFF
&
For Push-to-Start (PTS) vehicles
3
Press x1
ENGINE
START
STOP
Turn the ignition OFF by pressing once on the PTS button.
Page 14
1
10-pin
D2D
st
1
12-pin
14-pin
nd
2
rd
3
&
Solid
Connect the 10-pin, 12-pin and 14-pin harnesses to
DBALL, then wait until the LED turns ON solid red.
2
Solid
&
Solid
Flashes
&
Release
3
Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds
until the LED starts to flash orange and red.
Release the programming button. The LED turns ON solid red.
Warning Against Executing a Hard Reset!
A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such
as RFTD and D2D options) may have to be reconfigured. See the Feature & Option List section of this guide.
1
OR
If required for your installation, connect the 10-pin, 12-pin &
14-pin harnesses to the module. Press and hold the
programming button, then connect the 4-pin D2D harness.
D2D Installation
If required for your installation, connect the 10-pin & 12-pin
harnesses to the module. Press and hold the programming
button, then connect the 14-pin harness to the module.
W2W Installation
10-pin
D2D
st
1
12-pin
14-pin
nd
2
th
4
rd
3
10-pin
D2D
st
1
th
5
12-pin
14-pin
nd
2
rd
3
th
4
Module Reset
Hard Reset
2
& &
Solid Solid
Release
Wait 3 seconds until the LED turns ON solid orange then release the
programming button. The LED then turns ON solid red.
A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed
to the module using the web config tool will not be affected.
Page 15
1
OR
If required for your installation, connect the 10-pin, 12-pin &
14-pin harnesses to the module. Press and hold the
programming button, then connect the 4-pin D2D harness.
D2D Installation
If required for your installation, connect the 10-pin & 12-pin
harnesses to the module. Press and hold the programming
button, then connect the 14-pin harness to the module.
W2W Installation
10-pin
D2D
st
1
12-pin
14-pin
nd
2
th
4
rd
3
10-pin
D2D
st
1
th
5
12-pin
14-pin
nd
2
rd
3
th
4
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 16
Feature & Option List
* Default Option
Feat. Operation Flashes/Options Description
1. No RF Output*
Module is connected to a remote starter using a standard installation.
2. RFTD Output
Module is connected to an XL202 using an RSR or RXT installation (when available).
3. SmartStart Module is connected to SmartStart using an RSR or RXT installation (when available).
1. Disabled*
The OEM alarm can only be controlled with the OEM remote. The aftermarket system cannot
disable the OEM alarm if it is triggered.
2. Enabled
The OEM alarm will never be armed, even when arming with the OEM remote. When locking with
the OEM remote, the vehicle will lock 1 second after the command was received. An aftermarket
alarm/hybrid system is recomm ended.
1. Without OEM
Remote Starter*
The vehicle is equipped with a OEM Remote Start System.
2. With OEM
Remote Started
The vehicle is NOT equipped with a OEM Remote Start System.
RFTD Output
Type
1
2
OEM Alarm
Override
3
OEM Remote
Starter
Equipped
It is recommended to configure all the features and options listed below using the configuration tool found on the module
flashing page on www.directechs.com. The web offers more options such as RSR; however, manual configuration of the
features is possible using the information on this page.
To enter feature programming routine
-
Turn the ignition ON, then OFF.
-
Within 5 seconds, press and HOLD the programming button until the LED turns ON orange (after 3 seconds). Release the
Programming button.
-
The LED will flash green once slowly to indicate the feature number is 1. After a short delay, the LED flashes red rapidly to indicate
the current option of feature 1 (i.e. 1x green followed by 1x red indicates feature 1 is set to option 1). The flashing sequence will
repeat until a new command is entered.
Changing feature options
-
Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When installing the
DBALL in RSR using 3x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press lock/unlock to
change the options of the selected feature. Tapping the green or blue lock/unlock wires on the black 10-pin harness to ground will
change the option for the selected feature.
- The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green slowly
the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered.
Accessing another feature
-
Press and release the programming button a number of times to advance from the current feature to the next desired feature.
-
The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly to
indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered.
When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option.
Once a feature is programmed
-
Other features can be programmed.
-
The feature programming can be exited.
Exiting feature programming
-
No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming
sequence.
OR
-
Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the
end of the programming sequence.
Feature Programming
Programming
Button
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Page 17
LED Diagnostics & Troubleshooting
LED Description Troubleshooting
Module has no power.
Make sure the D2D harness is connected or that the 12
Volt is present between the red and black wires. If the
12 Volt is present, the module may be defective.
Waiting to begin the programming sequence.
Ensure the correct programming procedure is being
followed.
Initialization failed.
Reset the module and complete the programming again.
If the issue persists, please contact Technical Support.
Transponder functions were skipped.
(If compatible) when RXT mode is not desired or
convenience features are needed, please reset and
reprogram the module.
All required CAN networks has been detected. Normal operation.
1 of 2 CAN networks has been detected. Normal operation
Key2GO initiated.
Please follow the steps indicated in “Module
programming” to complete the Key2GO programming.
Module was successfully programmed with all functions. Normal operation
Module was successfully programmed without
transponder functions.
Normal operation.
CAN2 not detected.
Check the CAN2 Orange/Green and Orange/Brown wire
connections. Wake up the data bus by turning the
ignition on and try again. If your installation does not
require this connection, skip this step by pressing the
programming button 5 times.
J1850 not detected.
Check the J1850 wire connection. Wake up the data bus
by turning the ignition on and try again.
CAN1 not detected.
Check the CAN1 Tan and Tan/Black wire connections.
Wake up the data bus by turning the ignition on and try
again. If your installation does not require this
connection, skip this step by pressing the programming
button 5 times.
Bypass data not detected.
Check the bypass line connection. If more than one wire
is used, make sure they are not inverted. Ensure the
vehicle still operates correctly using the factory key.
Bypass processing error.
The bypass calculation failed. Reset the module and try
again. If the condition persists, please contact Technical
Support.
ISO 1 not detected.
The Yellow/Black wire did not detect the expected
signal. Refer to "Installation (wiring diagrams & vehicle
wiring reference charts)" to check the connections.
ISO 2 not detected.
The Orange/Black wire did not detect the expected
signal. Refer to "Installation (wiring diagrams & vehicle
wiring reference charts)" to check the connections.
MUX not detected.
The Violet/Green or Violet/Brown wire did not detect the
expected voltage value. Refer to "Installation (wiring
diagrams & vehicle wiring reference charts)" to check
the connections.
Module Programming
Module Programming - Error Codes
Solid red
Flashes red
x 1
Flashes red
x 1
Flashes red
x 2
Flashes red
x 3
Flashes red
x 4
Flashes red
x 5
Flashes red
x 6
Flashes red
x 7
Solid green
x 3 secs
Flashes
green
Solid orange
Flashes red
& green
Off
Flashes
orange
Flashes
orange
slowly
Solid orange
x 3 secs
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
LED Diagnostics & Troubleshooting
Page 18
LED Description Troubleshooting
OBDII feature is not supported.
The diagnostic data bus was not detected, therefore the
SmartStart features will be limited.
Ground When Running (Status) command received. The module has initialized the remote start sequence.
Ignition ON command received.
The module has received the Ignition ON command and
is processing the remote start sequence.
Start ON command received.
The module has received the Start ON command and is
processing the remote start sequence.
PTS shutdown error.
The PTS output from the module was not activated due
to safety protection.
CAN bus incorrectly detected.
Verify the CAN1 and CAN2 connections. Refer to
“Installation (wiring diagrams & vehicle wiring reference
charts)” to check the connections.
LOCK command received.
UNLOCK command received.
TRUNK command received.
AUX1 command received.
AUX2 command received.
AUX3 command received.
Takeover successful. Normal operation.
Runsafe was not disabled.
No UNLOCK command was received prior to opening the
door, or the 45 second timer expired in takeover mode.
Brake was not detected.
The brakes were not detected, which prevents the
system from shutting down the vehicle.
Smart key was not detected.
The smart key was not detected, which prevents the
system from shutting down the vehicle.
Speed was detected.
The vehicle was detected as moving, which prevents the
system from shutting it down.
3x OEM Lock Remote Start Activation was attempted
when RFTD feature is disabled.
Activated from Web automatically when using RSR flash
tool or can be done manually. Refer to feature
programing section for more information.
Feature error.
An RSR feature file mismatch was detected. Please
contact Technical Support.
RSR codes
External module synchronization
Commands
Activation Ground When Running (Status)
If the bypass module fails to flash, it did not receive the
signal. Commands can come from RF or D2D.
Shutdown codes
(Flashes red,
red then
orange) x 10
Flashes red
& orange
Flashes red
x 21
Flashes red
x 2
Flashes red
x 4
Flashes red
x 7
Flashes red
x 9
Flashes red
x 10
Flashes red
x 1
Flashes red
x 3
Flashes
green
Flashes
green
quickly
Flashes
green x 1
Flashes
orange x 1
Flashes
orange x 2
Flashes
orange x 3
Flashes
orange x 5
Flashes
orange x 4
Flashes
orange x 6
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Flashes Diagnostic
1 Runtime expired.
2 Over-rev shutdown.
3 Low/No RPM.
4 Transmitter shutdown.
5 Brake shutdown.
6 Hood shutdown/Remote start safety override switch is ON*.
7 Remote start safety override switch is ON*.
The parking lights on your vehicle will flash a specific number of times 3 seconds following an unscheduled shutdown or
failure to start. Each flashing pattern is described below.
* If the vehicle hood status is supported through data, it will also report a 7 flash safety override code.
Parking Light Error Codes
Page 19
For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed
Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the
security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material
under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer;
and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the
following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete
product and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its
intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or
other causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING
BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY,
FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL
PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY
PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS
PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF
THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR
INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS,
AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION,
LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING
DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF
CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE
DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED
TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE
RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL
DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL
LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE
MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE
PART AS DESCRIBED ABOVE.
This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of
America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has
not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s
website at: www.directed.com
920-10012-01 2013-07
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select
vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no
circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any
consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor
will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data
bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this
product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes
any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876
B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1;
7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent:
2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European
Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.
Limited One Year Consumer Warranty
Page 20
Rev.: 20161110
Platform: DBALL2
Firmware: FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown or failure to start. Each flashing pattern is
described below.
Flashes Diagnostic
1 Runtime expired.
2 Over-rev shutdown.
3 Low/No RPM.
4 Transmitter shutdown.
5 Brake shutdown.
6 Hood shutdown/Remote start safety override switch is ON*.
7 Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, it will also report a 7 flash
safety override code.
Vehicle Takeover
4
3
1
Press the remote start button on the transmitter to
start the vehicle.*
2
Press the brake pedal, put the car
in gear and drive off.
Enter the vehicle while making sure the
factory remote is inside with you.
Press the Push-to-Start (PTS) button once.
Press the Unlock button on the factory
or aftermarket remote.*
Ready to
drive off
Press
remote start
button*
Press Unlock
button on
either remote*
OR
* Your aftermarket remote may differ from the model shown in the illustrations.
2x
2x
2x
2x
Enter vehicle
with Smart Key
1X
ENGINE
START
STOP
PUSH
Pit stop/idle mode
The vehicle pit stop/idle mode feature is not available in this firmware.
3x OEM Lock Remote Start Activation
This solution includes the option to remote start your vehicle by pressing the Lock
button 3 times consecutively. If your vehicle allows the OEM remote to remain
active while the engine is running, you may shut down your remote starter by
pressing the Lock button 3 times once more.
Note: The range offered by OEM remotes is limited and typically requires you to be
within eyesight of the vehicle to control it.
Remote Start Ready (RSR)
Remote Start Ready (RSR) is a function that enables the interface
module to remote start the vehicle completely on its own.
Consequently, there is no need for an aftermarket or an OEM remote
starter in order to start the vehicle from a distance.
Quick Reference Guide
DBALL2-FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press once, then to activate the
rear hatch/tail glass release (optional).*
Press 3 times, then to activate
the panic mode.
Press once, then to reset the
remote starter runtime.
List of Available Commands
x1 +
x3 +
x1 +
* This output is configurable. see your authorized installation center for more
information.
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
SmartStart Compatible
This system is compatible with Directed SmartStart 3.0. For
a complete list of supported features, please visit
www.mysmartstart.com.
What is SmartStart?
Now you can remote start, lock and unlock your car just by pushing a button on
your smartphone; using the SmartStart App from Directed, the leader in vehicle
security and remote start. The simple graphical interface gives you control over the
following features of your installed remote start or security with remote start system:
Ÿ Lock/Arm
Ÿ Unlock/Disarm
Ÿ Remote Car Starter
Ÿ Trunk Release
Ÿ Panic
Ÿ Aux Channels
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart!
But, this is only the beginning! SmartStart is loaded with additional features
including GPS tracking, SmartSchedule, vehicle status, roadside assistance, home
control, parked car finder and more.
3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new
level of 2-way interaction with your vehicle. Connectivity is managed through the
Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Notes
Quick Reference Guide
DBALL2-FORD12 Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
