76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:30 PM Page 1
Sleeve Installation
The column, next to the sleeve part number, will help the rebuilder identify the cylinder that
is to be sleeved.
The column designation will also help the rebuilder to determine the proper installation procedure.
Column Code Explanations:
AC
- Original cylinder bore is alloy-chrome plated, Nikasil, or electrofused. The cylinder must be bored to
accept the new cylinder sleeve.
CS
- Original block has a cast-in sleeve liner in the cylinder. The cylinder must be bored out to accept the
new cylinder sleeve. The cast-in liner will be bored completely out of the cylinder. Do not try to push
out the cast-in liner, cylinder damage may be the result.
CI
- Original block has a cast-in liner in the cylinder. The cylinder must be bored to accept the new
cylinder sleeve. When using a CI style sleeve the cast-in liner will not be completely removed.
The sleeve is designed to insert into the iron lined cylinder.
RS
- Original block has a replacement sleeve. Heat the cylinder to remove the sleeve. Reheat the
cylinder to install the new cylinder sleeve.
CC - Original barrel is cast-iron. The cylinder must be bored to accept the new cylinder sleeve.
Technical Instructions
General Rules for Sleeve Installation:
These tips are intended to be a guide for installing sleeves into cylinders. There are always exceptions to
the rule and care must be taken on special applications.
ALWAYS WAIT UNTIL THE SLEEVE ARRIVES BEFORE BEGINNING ANY
MACHINE WORK. NEVER ASSUME THAT THE STATED MODEL AND YEAR OF
THE CYLINDER IS CORRECT. ALWAYS CHECK TO SEE IF THE SLEEVE PORTS
MATCH THE CYLINDER PORTS.
1. Interference fit for cylinder sleeve to aluminum bore is .004.
2. Interference fit for cylinder sleeve to a cast iron bore is .002 to .003.
3. Installation of flanged type sleeves follow the same rules, but the top of the cylinder must have a counter-
sink to the correct depth to accept the flanged sleeve. .000 to .001 interference fit on the flange diameter
is recommended.
4. Heating the cylinder for 45 minutes to one hour at 350 degrees to 450 degrees is preferable.
5. The sleeve should slide in very easily when the cylinder is properly heated. Freeze shrinking the sleeve
is not necessary. (Some machinists believe this assists installation of the sleeve.)
6. REMEMBER: Rap or press the sleeve down while the cylinder is cooling down. Use a hydraulic press
for this procedure.
7. Milling the top deck of the cylinder always adds a quality touch. A caution here, some cylinders may not
be able to have the top surface decked.
8. For two-stroke cylinders, blending or matching the aluminum cylinder to the sleeve ports is recommended
for proper fuel flow.
Centrifugal cast iron sleeves are made for
all popular makes and model MX, Street,
Dirt, ATVout-board3NOWMOBILEand
Watercraft engines.
Save your cylinder at
about half the cost of a
new cylinder.
Sleeves are made from an alloy of
carbon chrome, and molybdenum of
200 “Brinell” hardness for depend-
able long engine life.
Will not flake or peel.
Save expensive
ported cylinders!
BIG BORE Kits available.
“Horsepower is everything!”
MOTORCYCLE / ATV
SLEEVES FOR MOST
POPULAR MODELS.
PRE-PORTED RACE
SLEEVES will save your
damaged cylinder and still
maximize peak performance.
Each cylinder sleeve is
designed to best suit it’s
designated cylinder.
3./7-/"),%
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:30 PM Page 2
Order Toll Free 1-800-822-6005
i
O
O
The cast-in liner will be bored completely out of the cylinder. Do not try to push
o
O
The sleeve is designed to insert into the iron lined cylinder.
R
SLEEVE PORTS
M
Freeze shrinking the sleeve
i
Use a hydraulic press
f
W
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
Metric conversion: 1mm = .03937"
H
340 Jag, Lynx, Puma, Fan Cooled 339cc Twin AC
FL-1112
Cheetah, Bearcat, Panther
(
AG-34
)
60mm 2.362”
Z 370 1999-07 Fan Cooled 367cc Twin AC
FL-1245
2454M06000 SK1386
60.00 Std.
Z 370ES 2000-03 60mm 2.362”
Z 370LX 2004-07
Panther 370 2001, 2004-08
440 El Tigre 4000 Fan Cooled 431cc Twin AC
FL-1138
2300M06500
65.00 Std. 7001DA
65mm 2.559”
Trail Cat 4000 1980 Fan Cooled 431cc Twin AC
FL-1120
440 Panther
(
AK-44
)
1980-81, 1989-02
65mm 2.559”
440 Bearcat 1996-2000
440 Jag, SuperJag, AFS 1987-99
Z 440 1995-98
Z 440 1999-02 Fan Cooled 431cc Twin AC
FL-1246
Z 440ES 2000-02
65mm 2.559”
Z 440ESR 2003
Z 440LX 2004-06
El Tigre 5000 1985-88 Liquid Cooled 436cc Twin AC
FL-1096
2268M06800 SK1000
68.00 Std. 7002DA
Pantera 440 1985-88
68mm 2.677”
Pantera 440
(
AJ-44
)
1990-93 Liq.Cooled 436cc Twin AC
FL-1173
2332M06800 SK1085
68.00 Std.
Prowler 440
(
AJ-44
)
1990-92
68mm 2.677”
Prowler 440 Special 1991 Liquid Cooled 436cc Twin AC
FL-1241
68mm 2.677”
1991-92
Prowler 440 Special 1992-93 Liq. Cooled 436cc Twin AC
FL-1188
68mm 2.677”
Prowler 440 1993-94 Liquid Cooled 436cc Twin AC
FL-1195
68mm 2.677”
Cougar 440
(
AL-44
)
1994 Liquid Cooled 436cc Twin AC
FL-1173
68mm 2.677”
Jag 440 1996 Liquid Cooled 436cc Twin AC
FL-1217
Panther 440 1996-98
68mm 2.677”
ZL 440 1997-2000 Liquid Cooled 436cc Twin AC
FL-1217
68mm 2.677”
ZR 440
(
AN-49
)
1994-95 Liquid Cooled 436cc Twin AC
FL-1201
68mm 2.677”
ZR 440 1996-98 Liquid Cooled 438cc Twin AC
FL-1218
2390M06650 SK1260
66.50 Std.
66.5mm 2.618”
ZR 440 Snow-Pro 1999 Liquid Cooled 438cc Twin AC
FL-1270
2418M06650 SK1308
66.50 Std.
66.5mm 2.618”
’99-01
1999-01
ZR 440 Snow-Pro 2000-02 438cc Twin AC
FL-1265
2439M06650 SK1331
66.50 Std.
Liquid Cooled 66.5mm 2.618”
2002
ZR 440 Sno Pro 2003-04 Liq. Cooled 438cc Twin AC
FL-1287
(95B1)
66.5mm 2.618”
ZR 440 Sno Pro 2006 Liq. Cooled 438cc Twin AC
FL-1305
(95B5)
Oval Exhaust 66.5mm 2.618”
ZR 4000 LXR, RR 2015-16 Liq. Cooled 499cc Twin AC
FL-1272
2438M07100 SK1330
71.00 Std.
71mm 2.796”
5000 Series 1976-77 Free Air 500cc Twin AC
FL-1063
2286M07000
70.00 Std.
70mm 2.755”
5000 Series 1976-78 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
5000 Series 1978-80 Free Air 500cc Twin AC
FL-1095
(
6 Port
)
70mm 2.755”
Cougar 5000 1985 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
Cougar 5000 1986-90 Fan Cooled 500cc Twin AC
FL-1159
Cheetah 5000 1986-90
(
6 Port
)
7
0mm 2.755”
Panther 5000 1986-88 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
ARCTIC CAT
(SUZUKI)
-3--3-
L.A. SLeeve Co., InC.
562-945-7578
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:30 PM Page 3
Order Toll Free 1-800-822-6005
i
O
O
The cast-in liner will be bored completely out of the cylinder. Do not try to push
o
O
The sleeve is designed to insert into the iron lined cylinder.
R
SLEEVE PORTS
M
Freeze shrinking the sleeve
i
Use a hydraulic press
f
W
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
Metric conversion: 1mm = .03937"
H
340 Jag, Lynx, Puma, Fan Cooled 339cc Twin AC
FL-1112
Cheetah, Bearcat, Panther
(
AG-34
)
60mm 2.362”
Z 370 1999-07 Fan Cooled 367cc Twin AC
FL-1245
2454M06000 SK1386
60.00 Std.
Z 370ES 2000-03 60mm 2.362”
Z 370LX 2004-07
Panther 370 2001, 2004-08
440 El Tigre 4000 Fan Cooled 431cc Twin AC
FL-1138
2300M06500
65.00 Std. 7001DA
65mm 2.559”
Trail Cat 4000 1980 Fan Cooled 431cc Twin AC
FL-1120
440 Panther
(
AK-44
)
1980-81, 1989-02
65mm 2.559”
440 Bearcat 1996-2000
440 Jag, SuperJag, AFS 1987-99
Z 440 1995-98
Z 440 1999-02 Fan Cooled 431cc Twin AC
FL-1246
Z 440ES 2000-02
65mm 2.559”
Z 440ESR 2003
Z 440LX 2004-06
El Tigre 5000 1985-88 Liquid Cooled 436cc Twin AC
FL-1096
2268M06800 SK1000
68.00 Std. 7002DA
Pantera 440 1985-88
68mm 2.677”
Pantera 440
(
AJ-44
)
1990-93 Liq.Cooled 436cc Twin AC
FL-1173
2332M06800 SK1085
68.00 Std.
Prowler 440
(
AJ-44
)
1990-92
68mm 2.677”
Prowler 440 Special 1991 Liquid Cooled 436cc Twin AC
FL-1241
68mm 2.677”
1991-92
Prowler 440 Special 1992-93 Liq. Cooled 436cc Twin AC
FL-1188
68mm 2.677”
Prowler 440 1993-94 Liquid Cooled 436cc Twin AC
FL-1195
68mm 2.677”
Cougar 440
(
AL-44
)
1994 Liquid Cooled 436cc Twin AC
FL-1173
68mm 2.677”
Jag 440 1996 Liquid Cooled 436cc Twin AC
FL-1217
Panther 440 1996-98
68mm 2.677”
ZL 440 1997-2000 Liquid Cooled 436cc Twin AC
FL-1217
68mm 2.677”
ZR 440
(
AN-49
)
1994-95 Liquid Cooled 436cc Twin AC
FL-1201
68mm 2.677”
ZR 440 1996-98 Liquid Cooled 438cc Twin AC
FL-1218
2390M06650 SK1260
66.50 Std.
66.5mm 2.618”
ZR 440 Snow-Pro 1999 Liquid Cooled 438cc Twin AC
FL-1270
2418M06650 SK1308
66.50 Std.
66.5mm 2.618”
’99-01
1999-01
ZR 440 Snow-Pro 2000-02 438cc Twin AC
FL-1265
2439M06650 SK1331
66.50 Std.
Liquid Cooled 66.5mm 2.618”
2002
ZR 440 Sno Pro 2003-04 Liq. Cooled 438cc Twin AC
FL-1287
(95B1)
66.5mm 2.618”
ZR 440 Sno Pro 2006 Liq. Cooled 438cc Twin AC
FL-1305
(95B5)
Oval Exhaust 66.5mm 2.618”
ZR 4000 LXR, RR 2015-16 Liq. Cooled 499cc Twin AC
FL-1272
2438M07100 SK1330
71.00 Std.
71mm 2.796”
5000 Series 1976-77 Free Air 500cc Twin AC
FL-1063
2286M07000
70.00 Std.
70mm 2.755”
5000 Series 1976-78 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
5000 Series 1978-80 Free Air 500cc Twin AC
FL-1095
(
6 Port
)
70mm 2.755”
Cougar 5000 1985 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
Cougar 5000 1986-90 Fan Cooled 500cc Twin AC
FL-1159
Cheetah 5000 1986-90
(
6 Port
)
70mm 2.755”
Panther 5000 1986-88 Fan Cooled 500cc Twin AC
FL-1094
70mm 2.755”
ARCTIC CAT
(SUZUKI)
-3--3-
L.A. SLeeve Co., InC.
562-945-7578
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:30 PM Page 3
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-4--4-
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
Metric conversion: 1mm = .03937"
H
ARCTIC CAT
(SUZUKI)
6000 Series 440 1978-79 Liquid Cooled 436cc Twin AC
FL-1096
2268M06800 SK1000
68.00 Std. 7003DA
68mm 2.677”
6000 Series 500 1980-81, 1984-86 500cc Twin AC
FL-1105
2293M07000
70.00 Std.
Liquid Cooled 70mm 2.755”
ZR/ZL500, ZR/ZL500 EFI 1998-00 497cc Twin AC
FL-1234
2393M07100 SK1261
71.00 Std. 7004DA
Powder Special 500 1999-2000 71mm 2.796” 71.00 Std. 01.5597.000
(Pro-X)
ZR/ZL500, ZR/ZL500 EFI 2001-02 497cc Twin AC
FL-1247
Mountaincat 500 2001-02 (88BB) 71mm 2.796”
(
Power Valve Models
)
Liquid Cooled
F5 500 Firecat 2003-14 Liquid Cooled 499cc Twin AC
FL-1272
2438M07100 SK1330
71.00 Std.
M5 500 Mountaincat 2005-06
71mm 2.796”
Crossfire 5 2007-09
LXR 2007-12
Sabercat 500 2004-06
Sno Pro 500 2010-14
ZR 4000 LXR, RR 2015-16
El Tigre 6000 1986-90 Liquid Cooled 529cc Twin AC
FL-1146
72.00 Std.
Cheetah 530 1986-88 72mm 2.835”
530 El Tigre EXT 1989 Liquid Cooled 529cc Twin AC
FL-1168
72mm 2.835”
530 El Tigre EXT 1990-91 Liquid Cooled 529cc Twin AC
FL-1174
72mm 2.835”
550 EXT Special, Liquid Cooled 550cc Twin AC
FL-1177
2338M07340 SK1101
73.40 Std.
7005DA
Mountain Cat, Cougar, 73.4mm 2.889”
Bearcat 1991-02
(
AA-55
)
Pantera 550 1993-94, 2002-05
Panther 1997-01, ZL550, ESR 2000-03
EXT 580Z, Mountain Cat 1993-94 580cc Twin AC
FL-1192
2348M07540 SK1141
75.40 Std. 01.5593.000
Liquid Cooled 75.4mm 2.968”
EXT 580, Mountain Cat 1995-98 580cc Twin AC
FL-1203
ZR 580 1994-97 Liquid Cooled 75.4mm 2.968”
(
3 Port Exhaust
)
580 Pantera (AA-58) 1995-01 580cc Twin AC
FL-1192
EXT DLX 1998 75.4mm 2.968”
ZL 580 2000 Liquid Cooled
Z570 2002-07 Fan Cooled 565cc Twin AC
FL-1269
F570 2008-14, T570 ‘08-14 73.8mm 2.905”
Bearcat 570 2004-14
Bearcat 2000 2015-16
Lynx 2000 2015-16
Mountaincat 570 2002-04
Panther 570 2002-07
ZRT 600 1996-01 Liquid Cooled 594cc Triple AC
FL-1212
2364M06650 SK1189
66.50 Std. 7006DA
EXT 600 1997 66.5mm 2.618”
Powder Extreme 1997-98
Triple Touring 1999-01
Big Bore to 700cc 700cc Triple AC
FL-1212B
72mm 2.834”
NO LONGER IN PRODUCTION
ZR 600 1998-00 Liquid Cooled 599cc Twin AC
FL-1235
2391M07800 SK1263
78.00 Std. 7007DA
Powder Special 600 1998-00 78mm 3.070”
(Not for 2000 Models)
78.00 Std. 01.5698.000
(
88B6
)
ZL600 1999-00
(
Bridged Exhaust
)
(Pro-X)
Big Bore to 680cc 680cc Twin AC
FL-1235B 2392M08300 SK1264
83.00 Std.
83mm 3.268”
(Not for 2000 Models)
ZL 600,
EFI, ESR, SS 2001-03
Liq. Cooled 599cc Twin AC
FL-1271
2427M07800 SK1316
78.00 Std. 7008DA
ZR600 2001-02 78mm 3.070” 78.00 Std. 01.5601.000
Mountain Cat 600 EFI 2001-05
(Pro-X)
Pantera 600 EFI 2002-05
(
88BA
)
CF6 600 Firecat 2004-11 Liquid Cooled 599cc Twin AC
FL-1285
2445M07380 SK1384
73.80 Std.
M6 600 Mountaincat 2007-11 73.8mm 2.906”
Crossfire 6 2006-11
LXR 2007-09
Sabercat 600 2004-06
Sno Pro 600 2007-11
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:31 PM Page 4
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-5--5-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
Sno Pro 600 2012-13 Liquid Cooled 599cc Twin AC
FL-1319
2445M07380
73.80 Std.
ZR 6000 Sno Pro R 2014 73.8mm 2.906”
ZR 6000R SX 2015-16
M6000 2014-16 Liquid Cooled 599cc Twin AC
FL-1320
2464M07380
73.80 Std.
XF6000 2015-16 CTEC2 73.8mm 2.906”
ZR 6000 El Tigre 2014-16
ZR 6000 Sno Pro ES, RR 2015-16
ZR 6000 LXR 2015-16
ZR 6000 R XC 2015
650 Wildcat 1988-90 Liquid Cooled 650cc Twin AC
FL-1160
2323M07800 SK1054
78.00 Std.
78mm 3.070”
Special Heavy O.D. Sleeve AC
FL-1160H
2370M08100 SK1195
81.00 .120.
O.D. 3.310” Allows bore to 701cc 78mm
—
81mm
(701cc, Must use “H” style sleeve)
Wildcat, Mountain Cat 700 1991-96 700cc Twin AC
FL-1178
2370M08100 SK1195
81.00 Std.
(
AC-70
)
Liquid Cooled 81mm 3.189” 2370M08200 SK1196 82.00 .040
Big Bore to 790cc 790cc Twin AC
FL-1178B
2400M08600 SK1273
86.00 .196
86mm 3.386”
F7 Firecat EFI 700 2003-06
Liquid Cooled 698cc Twin AC
FL-1273
2410M07970 SK1328
79.70 Std.
7009DA
Sabercat 700 2004-06 79.7mm 3.138” 79.70 Std. 01.5703.000
M7 Mountaincat 700 2005-06
(Pro-X)
Crossfire 7 2006
ZR 700 1994-96
(
AB-70
)
Liquid Cooled 700cc Twin AC
FL-1204
2370M08100 SK1195
81.00 Std. 7010DA
81mm 3.189” 2370M08200 SK1196 82.00 .040
ZL, ZR
700 1999-2000 Liquid Cooled 700cc Twin AC
FL-1249
Powder Special 700 1999-2000 81mm 3.189”
ZRT 800 1995-01
(
AA-80
)
Liquid Cooled 794cc Triple AC
FL-1205
2361M07200 SK1176
72.00 Std. 7012DA
Pantera 800 1998-99 72mm 2.835”
Big Bore to 992cc 992cc Triple AC
FL-1205B
80.5mm 3.169”
NO LONGER IN PRODUCTION
ZR800, ZL800 2001-03 Liquid Cooled 785cc Twin AC
FL-1266 2431M08100 SK1318
81.00 Std. 7011DA
Mountain Cat 800 2001-04 81mm 3.189” 81.00 Std. 01.5802.000
Pantera 800 2002-04
(Pro-X)
Big Bore to 883cc 883cc Twin AC
FL-1266B
86mm 3.385”
NO LONGER IN PRODUCTION
F8, M8 800 H.O. 2007-09 Liquid Cooled 794cc Twin AC
FL-1298
2451M08500 SK1374
85.00 Std. 01.5807.000
Crossfire 8 2007-09 (98B0) 85mm 3.346”
LXR, Sno Pro 2007-09
F8, M8 H.O. 2010-13 Liquid Cooled 794cc Twin AC
FL-1317
2460M08500
85.00 Std.
CF8, CFR8 2010-11 (98B4) 85mm 3.346”
LXR, Sno Pro 2010-16
XF800 2012-13
M8000 2014-16 Liquid Cooled 794cc Twin AC
FL-1317
2460M08500
85.00 Std.
XF8000 2014-16 (98B4) 85mm 3.346”
ZR 8000 2014-16
Thunder Cat 900 1993-97
(
AA-90
)
895cc Triple AC
FL-1191
2349M07650 SK1143
76.50 Std.
Liquid Cooled 76.5mm 3.012”
Big Bore to 992cc 992cc Triple AC
FL-1191B
2349M08050
80.50 .158
80.5mm 3.169”
ZR900 2003-06 Liquid Cooled 862cc Twin AC
FL-1274
2407M08500 SK1329
85.00 Std. 01.5903.000
Mountain Cat 900 2003-06 85mm 3.346”
King Cat 900 2004-06
Thunder Cat 1000 1998-02 Liquid Cooled 999cc Triple AC
FL-1236
2394M08100 SK1265
81.00 Std. 7013DA
Thunder Cat Mountain Cat 1998-2000 81mm 3.189”
Mountain Cat 1000 2001-02
Pantera 1000 2000-01
Big Bore to 1098cc 1098c
c Triple AC
FL-1236B
718M08500 SK1266
85.00 .158
F1000, M1000 2007-11 Liquid Cooled 999cc Twin AC
FL-1299
2450M09030 SK1373
90.30 Std. 7014DA
Crossfire 1000 2007-11 90.3mm 3.555”
LXR 1000 2007-08
Sno-Pro 1000 2008-11
ARCTIC CAT 4-STRoKe
T660 2002-07 4-Stroke 660cc Triple RS
FL-1280
Panther 660 2006-08 Liquid Cooled 68mm 2.677”
Bearcat 660 2006-08
ARCTIC CAT
(SUZUKI)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:31 PM Page 5
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-5--5-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
Sno Pro 600 2012-13 Liquid Cooled 599cc Twin AC
FL-1319
2445M07380
73.80 Std.
ZR 6000 Sno Pro R 2014 73.8mm 2.906”
ZR 6000R SX 2015-16
M6000 2014-16 Liquid Cooled 599cc Twin AC
FL-1320
2464M07380
73.80 Std.
XF6000 2015-16 CTEC2 73.8mm 2.906”
ZR 6000 El Tigre 2014-16
ZR 6000 Sno Pro ES, RR 2015-16
ZR 6000 LXR 2015-16
ZR 6000 R XC 2015
650 Wildcat 1988-90 Liquid Cooled 650cc Twin AC
FL-1160
2323M07800 SK1054
78.00 Std.
78mm 3.070”
Special Heavy O.D. Sleeve AC
FL-1160H
2370M08100 SK1195
81.00 .120.
O.D. 3.310” Allows bore to 701cc 78mm
—
81mm
(701cc, Must use “H” style sleeve)
Wildcat, Mountain Cat 700 1991-96 700cc Twin AC
FL-1178
2370M08100 SK1195
81.00 Std.
(
AC-70
)
Liquid Cooled 81mm 3.189” 2370M08200 SK1196 82.00 .040
Big Bore to 790cc 790cc Twin AC
FL-1178B
2400M08600 SK1273
86.00 .196
86mm 3.386”
F7 Firecat EFI 700 2003-06
Liquid Cooled 698cc Twin AC
FL-1273
2410M07970 SK1328
79.70 Std.
7009DA
Sabercat 700 2004-06 79.7mm 3.138” 79.70 Std. 01.5703.000
M7 Mountaincat 700 2005-06
(Pro-X)
Crossfire 7 2006
ZR 700 1994-96
(
AB-70
)
Liquid Cooled 700cc Twin AC
FL-1204
2370M08100 SK1195
81.00 Std. 7010DA
81mm 3.189” 2370M08200 SK1196 82.00 .040
ZL, ZR 700 1999-2000 Liquid Cooled 700cc Twin AC
FL-1249
Powder Special 700 1999-2000 81mm 3.189”
ZRT 800 1995-01
(
AA-80
)
Liquid Cooled 794cc Triple AC
FL-1205
2361M07200 SK1176
72.00 Std. 7012DA
Pantera 800 1998-99 72mm 2.835”
Big Bore to 992cc 992cc Triple AC
FL-1205B
80.5mm 3.169”
NO LONGER IN PRODUCTION
ZR800, ZL800 2001-03 Liquid Cooled 785cc Twin AC
FL-1266 2431M08100 SK1318
81.00 Std. 7011DA
Mountain Cat 800 2001-04 81mm 3.189” 81.00 Std. 01.5802.000
Pantera 800 2002-04
(Pro-X)
Big Bore to 883cc 883cc Twin AC
FL-1266B
86mm 3.385”
NO LONGER IN PRODUCTION
F8, M8 800 H.O. 2007-09 Liquid Cooled 794cc Twin AC
FL-1298
2451M08500 SK1374
85.00 Std. 01.5807.000
Crossfire 8 2007-09 (98B0) 85mm 3.346”
LXR, Sno Pro 2007-09
F8, M8 H.O. 2010-13 Liquid Cooled 794cc Twin AC
FL-1317
2460M08500
85.00 Std.
CF8, CFR8 2010-11 (98B4) 85mm 3.346”
LXR, Sno Pro 2010-16
XF800 2012-13
M8000 2014-16 Liquid Cooled 794cc Twin AC
FL-1317
2460M08500
85.00 Std.
XF8000 2014-16 (98B4) 85mm 3.346”
ZR 8000 2014-16
Thunder Cat 900 1993-97
(
AA-90
)
895cc Triple AC
FL-1191
2349M07650 SK1143
76.50 Std.
Liquid Cooled 76.5mm 3.012”
Big Bore to 992cc 992cc Triple AC
FL-1191B
2349M08050
80.50 .158
80.5mm 3.169”
ZR900 2003-06 Liquid Cooled 862cc Twin AC
FL-1274
2407M08500 SK1329
85.00 Std. 01.5903.000
Mountain Cat 900 2003-06 85mm 3.346”
King Cat 900 2004-06
Thunder Cat 1000 1998-02 Liquid Cooled 999cc Triple AC
FL-1236
2394M08100 SK1265
81.00 Std. 7013DA
Thunder Cat Mountain Cat 1998-2000 81mm 3.189”
Mountain Cat 1000 2001-02
Pantera 1000 2000-01
Big Bore to 1098cc 1098cc Triple AC
FL-1236B
718M08500 SK1266
85.00 .158
F1000, M1000 2007-11 Liquid Cooled 999cc Twin AC
FL-1299
2450M09030 SK1373
90.30 Std. 7014DA
Crossfire 1000 2007-11 90.3mm 3.555”
LXR 1000 2007-08
Sno-Pro 1000 2008-11
ARCTIC CAT 4-STRoKe
T660 2002-07 4-Stroke 660cc Triple RS
FL-1280
Panther 660 2006-08 Liquid Cooled 68mm 2.677”
Bearcat 660 2006-08
ARCTIC CAT
(SUZUKI)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:31 PM Page 5
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-6--6-
H
HH
4-Stroke 1056cc Twin AC
98.00 Std
Liquid Cooled 98mm 3.858”
Fan Cooled 339cc Twin AC
60mm 2.362”
Free Air 339cc Twin AC
60mm 2.362”
Fan Cooled 398cc Twin AC
65mm 2.559”
Free Air 398cc Twin AC
65mm 2.559”
Free Air 436cc Twin AC
68.00 Std.
68mm 2.677”
Fan Cooled 436cc Twin AC
68.00 Std.
68mm 2.677”
Free Air 436cc Twin AC
Fan Cooled 436cc Twin AC
68.00 Std.
(
Non-Bridged Intake Port
)
68mm 2.677”
Liquid Cooled 436cc Twin AC
68mm 2.677”
NO LONGER IN PRODUCTION
Fan Cooled 436cc Twin AC
68.00 Std.
(Bridged Intake Port) 68mm 2.677”
Free Air 339cc Twin AC
60mm 2.362”
(
Bridged Intake Port
)
339cc Twin AC
60mm 2.362”
Fan Cooled 436cc Twin AC
68.00 Std.
(
Bridged Intake Port
)
68mm 2.677”
Liquid Cooled 436cc Twin AC
68mm 2.677”
NO LONGER IN PRODUCTION
Fan Cooled 436cc Twin AC
68.00 Std.
68mm 2.677”
Liquid Cooled 436cc Twin AC
(
6 Port
)
68mm 2.677”
Liquid Cooled 436cc Twin AC
(
8 Port
)
68mm 2.677”
Liquid Cooled 530cc Twin AC
(
8 Port
)
75mm 2.952”
398cc Twin RS
65mm 2.559”
NO LONGER IN PRODUCTION
438cc Twin RS
67.5mm 2.658”
NO LONGER IN PRODUCTION
744cc Twin RS
80mm 3.150”
NO LONGER IN PRODUCTION
244cc Single CI
Fan Cooled 72mm 2.835”
Free Air 335cc Twin AC
62mm 2.441”
Free Air 335cc Twin AC
62mm 2.441”
Liquid Cooled 322cc Twin AC
61.75mm 2.431”
NO LONGER IN PRODUCTION
335cc Twin CI
Liquid Cooled 61.75mm 2.431”
ARCTIC CAT 4-STROKE
(SUZUKI)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:31 PM Page 6
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-7--7-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
340 Sprint
(
EC-34-2PM
)
1985-91 339cc Twin CI
FL-1152
2316M06225
62.25 .010
340 Classic 2003-06 Fan Cooled 62mm 2.441” 2316M06250 62.50 .020
340 LX 2007-08 2316M06300 63.00 .040
340 Touring 2006-08
Indy Sport, Sport GT 1989-90
Indy Lite, Lite GT 1991-98
Indy 340 1999-07
400 Indy 1984-91 Liquid Cooled 398cc Twin CI
FL-1143
65mm 2.559”
NO LONGER IN PRODUCTION
Special Heavy O.D. Sleeve 65mm–6
7.75mm CS
FL-1143H
(Allows bore to 67.75mm)
NO LONGER IN PRODUCTION
Big Bore to 488cc 488cc Twin CS
FL-1143B
2345M07200 SK1064
72.00 Std.
(
Special cylinder machining may be required
) 72mm 2.835”
440 TX
(
EC-44
)
1975 432cc Twin AC
FL-1074
2318M06772
67.72 Std.
67.75mm 2.667”
NO LONGER IN PRODUCTION
440 TX 1976-80 432cc Twin AC
FL-1079
67.75
mm 2.667”
440 Super-Mod
(
EC-44PL
)
1976-78 432cc Twin AC
FL-1142
67.75mm 2.667”
NO LONGER IN PRODUCTION
440 TXC 1981 Fan Cooled 432cc Twin CI
FL-1128
67.75mm 2.667”
440 Cutlass 1982-83 432cc Twin CI
FL-1137
67.75mm 2.667”
440 Longtrak 1983-90 Fan Cooled 432cc Twin CI
FL-1162
2343M06772
SK1201
67.72 Std.
67.72mm 2.666”
Special Heavy O.D. Sleeve CS
FL-1162H
440 Indy Sport 1991-99 Fan Cooled 432cc Twin CI
FL-1219
Sport SKS 1994 67.72mm
2.666”
Sport Touring 1995-99
Super Sport 1996
Trans Sport 1996-99
Indy XCF 1997-98
Special Heavy O.D. Sleeve CS
FL-1219H
440 Indy 1992 Liquid Cooled 432cc Twin CI
FL-1182
2343M06772 SK1123
67.72 Std.
Indy XCR 1992-94 67.72mm 2.666” 2343M06825 SK1124 68.25 .021
Indy SKS 1993-95 2343M06925 SK1125 69.25 .060
Indy LC 1996-97
440 Indy XCF 1999 Fan Cooled 438cc Twin CI
FL-1250
440 Indy XCF SP 2001 65mm 2.559”
440 PROX 2002-03 Fan Cooled 438cc Twin AC
FL-1281
66mm 2.598”
NO LONGER IN PRODUCTION
440 PROX Racing 2002-03 Liquid Cooled 438cc Twin AC
FL-1293
66mm 2.598”
NO LONGER IN PRODUCTION
440 Indy XC, XCR
(
EC-45
)
1995-97 439cc Twin AC
FL-1207
2362M06825 SK1178
68.25 Std.
Liquid Cooled 68.25mm 2.687”
(Not for XCR ’97)
440 Indy XCR 1998 Liquid Cooled 43
8cc Twin AC
FL-1260
(Early 1998 Pre-production 66mm 2.599”
Hi-Rev porting motor)
NO LONGER IN PRODUCTION
440 Indy XCR 1998-99 Liquid Cooled 438cc Twin AC
FL-1231
2401M06600
SK1274
66.00 Std.
(
Cylinder #3022065
)
66mm 2.599”
(Not for XCR EDGE)
500 Indy Fan Cooled 488cc Twin CI
FL-1148
2345M07200 SK1076
72.00 Std.
Indy Trail 1986-99 72mm 2.835” 2345M07250 SK1077 72.50 .020
Indy Trail
Deluxe 1991-92, ’94-95 2345M07300 SK1078 73.00 .040
Indy Trail Touring 1996-99 2345M07350 SK1079 73.50 .060
Super Trak 1989-92
(Not for Widetrack Models)
Super Sport 1994-95, ’97-98
Trail RMK 1997-98
Wide Trak GT 1993-97
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:32 PM Page 7
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-7--7-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
340 Sprint
(
EC-34-2PM
)
1985-91 339cc Twin CI
FL-1152
2316M06225
62.25 .010
340 Classic 2003-06 Fan Cooled 62mm 2.441” 2316M06250 62.50 .020
340 LX 2007-08 2316M06300 63.00 .040
340 Touring 2006-08
Indy Sport, Sport GT 1989-90
Indy Lite, Lite GT 1991-98
Indy 340 1999-07
400 Indy 1984-91 Liquid Cooled 398cc Twin CI
FL-1143
65mm 2.559”
NO LONGER IN PRODUCTION
Special Heavy O.D. Sleeve 65mm–67.75mm CS
FL-1143H
(Allows bore to 67.75mm)
NO LONGER IN PRODUCTION
Big Bore to 488cc 488cc Twin CS
FL-1143B
2345M07200 SK1064
72.00 Std.
(
Special cylinder machining may be required
) 72mm 2.835”
440 TX
(
EC-44
)
1975 432cc Twin AC
FL-1074
2318M06772
67.72 Std.
67.75mm 2.667”
NO LONGER IN PRODUCTION
440 TX 1976-80 432cc Twin AC
FL-1079
67.75
mm 2.667”
440 Super-Mod
(
EC-44PL
)
1976-78 432cc Twin AC
FL-1142
67.75mm 2.667”
NO LONGER IN PRODUCTION
440 TXC 1981 Fan Cooled 432cc Twin CI
FL-1128
67.75mm 2.667”
440 Cutlass 1982-83 432cc Twin CI
FL-1137
67.75mm 2.667”
440 Longtrak 1983-90 Fan Cooled 432cc Twin CI
FL-1162
2343M06772
SK1201
67.72 Std.
67.72mm 2.666”
Special Heavy O.D. Sleeve CS
FL-1162H
440 Indy Sport 1991-99 Fan Cooled 432cc Twin CI
FL-1219
Sport SKS 1994 67.72mm 2.666”
Sport Touring 1995-99
Super Sport 1996
Trans Sport 1996-99
Indy XCF 1997-98
Special Heavy O.D. Sleeve CS
FL-1219H
440 Indy 1992 Liquid Cooled 432cc Twin CI
FL-1182
2343M06772 SK1123
67.72 Std.
Indy XCR 1992-94 67.72mm 2.666” 2343M06825 SK1124 68.25 .021
Indy SKS 1993-95 2343M06925 SK1125 69.25 .060
Indy LC 1996-97
440 Indy XCF 1999 Fan Cooled 438cc Twin CI
FL-1250
440 Indy XCF SP 2001 65mm 2.559”
440 PROX 2002-03 Fan Cooled 438cc Twin AC
FL-1281
66mm 2.598”
NO LONGER IN PRODUCTION
440 PROX Racing 2002-03 Liquid Cooled 438cc Twin AC
FL-1293
66mm 2.598”
NO LONGER IN PRODUCTION
440 Indy XC, XCR
(
EC-45
)
1995-97 439cc Twin AC
FL-1207
2362M06825 SK1178
68.25 Std.
Liquid Cooled 68.25mm 2.687”
(Not for XCR ’97)
440 Indy XCR 1998 Liquid Cooled 438cc Twin AC
FL-1260
(Early 1998 Pre-production 66mm 2.599”
Hi-Rev porting motor)
NO LONGER IN PRODUCTION
440 Indy XCR 1998-99 Liquid Cooled 438cc Twin AC
FL-1231
2401M06600
SK1274
66.00 Std.
(
Cylinder #3022065
)
66mm 2.599”
(Not for XCR EDGE)
500 Indy Fan Cooled 488cc Twin CI
FL-1148
2345M07200 SK1076
72.00 Std.
Indy Trail 1986-99 72mm 2.835” 2345M07250 SK1077 72.50 .020
Indy Trail Deluxe 1991-92, ’94-95 2345M07300 SK1078 73.00 .040
Indy Trail Touring 1996-99 2345M07350 SK1079 73.50 .060
Super Trak 1989-92
(Not for Widetrack Models)
Super Sport 1994-95, ’97-98
Trail RMK 1997-98
Wide Trak GT 1993-97
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:32 PM Page 7
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-8--8-
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
500 Indy Liquid Cooled 488cc Twin CI
FL-1165
2345M07200 SK1064
72.00 Std.
500, Classic 500 1989-06 72mm 2.835” 2345M07250 SK1065 72.50 .020
Classic Touring 1993-03 2345M07300 SK1066 73.00 .040
Wide Trak 1990-93 2345M07350 SK1067 73.50 .060
Wide Trak LX 1994-09 (EC45PL097)
SP, SKS 1989-92, SPX 1992
(Not for Widetrack Models)
Carb SKS 1996-97, Carb RMK 1996
EFI 1993-97, EFI SKS 1993-96
EFI RMK 1996, RMK 1998-99
Super Sport 2005
Special Heavy O.D.Sleeve CS
FL-1165H
500 Centurion Liquid Cooled 500cc Triple CS
FL-1100
61.75mm 2.431”
500 Indy XC 1999-03 Liquid Cooled 500cc Twin RS
FL-1254
2406M07050
SK1281
70.50 Std.
XC SP 1999 70.5mm 2.776” 2406M07100 SK1282 71.00 .020
RMK 2000-02
Classic 2003
500 XC SP 2000-07 Liquid Cooled 500cc Twin AC
FL-1261
Variable Exhaust 70.5mm 2.776”
550 Trail RMK 1999-06 Fan Cooled 544cc Twin CI
FL-1251
2417M07300
SK1305
73.00 Std. 01.5599.000
550 LX 2007 73mm 2.874” 2417M07350 SK1306 73.50 .020 01.5599.050
Super Sport 1999-07 2417M07400 SK1307 74.00 .040 01.5599.100
Trail Touring 2000, 2002-06
Sport Touring/ES 2000-04
Classic 2002-06
PROX Fan 550 2004
Special Heavy O.D.Sleeve
Removes Cast-In Sleeve CS
FL-1251H
550 Indy 2014-16 Fan Cooled 544cc Twin AC
FL-1300
2417M07300
SK1305
73.00 Std. 7015DA
IQ Shift 2009-13 73mm 2.874”
Trail RMK 2007-09
Touring DLX 2007-09
SuperSport, LX 2008
580 XLT 1993-94 Liquid Cooled 579cc Triple CI
FL-1190
2347M06400
SK1145
64.00 Std.
XLT SP, XLT SKS 64mm 2.519” 2347M06450 SK1146 64.50 .020
Special Heavy O.D. Sleeve CS
FL-1190H
2347M06500 65.00 .040
600 Indy 1984-87 Liquid Cooled 597cc Triple CI
FL-1129
65mm 2.559”
Special Heavy O.D. Sleeve 65mm – 72mm CS
FL-1129H
(
Allows bore to 72mm
)
Must use “H” style sleeve with 67.75mm
and larger pistons.
600 Indy XCR 1995-96 Liquid Cooled 597cc Triple CS
FL-1206
2358M06500
SK1167
65.00 Std.
Indy XLT SP 1996-99 65mm 2.559” 2358M06550 SK1168 65.50 .020
2358M06600 SK1169 66.00 .040
600 XLT SP 1995 Liquid Cooled 597cc Triple CS
FL-1209
2358M06650 SK1278 66.50 .060
XLT, XLT RMK, XLT SKS 1995-97 65mm 2.559”
XLT Touring 1995-99
XLT LTD 1997-98
XLT Classic 1999
600 Indy XC 1997 Liquid Cooled 597cc Triple AC
FL-1220
65mm 2.559”
NO LONGER IN PRODUCTION
600 Indy XLT 1998-99 Liquid Cooled 597cc Triple CS
FL-1233
2358M06500
SK1167
65.00 Std.
Indy Triumph 2000 65mm 2.559” 2358M06550 SK1168 65.50 .020
NO LONGER IN PRODUCTION
600 XCR SP 1996 Liquid Cooled 598cc Triple AC
FL-1213
2365M06250
62.50 Std.
XCR SE 1997, XCR 1997-98 62.5mm 2.460”
Big Bore to 700cc 700cc Triple AC
FL-1213B
67.5mm 2.657”
600 Indy XC 1998-99 Liquid Cooled 593cc Twin CI
FL-1232
2426M07450 SK1314
74.50 Std. 7016DA
RMK 1998-01 74.5mm 2.933”
Classic 2000-01
XC SP 1999, XC Deluxe 2000
600 Indy XC SP 2000-01 Liquid Cooled 599cc Twin AC
FL-1262
2437M07725 SK1321
77.25 Std. 7017DA
Classic, Classic Touring 2000-01 77.25mm 3.041” 77.25 Std. 01.5603.000
Edge X 2001
(Pro-X)
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:32 PM Page 8
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-9--9-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
600 HO Edge 2002-2012 Liquid Cooled 599cc Twin AC
FL-1289
2437M07725
77.25 Std. 7017DA
600 IQ 2007-16 Case Reed 77.25mm 3.041”
(00-07 Carb) 77.25 Std. 01.5603.000
Classic Touring 2002-05
2462M07725
77.25 Std.
(Pro-X)
Dragon SP 2009 (07-14 CFI)
Edge 2004
Fusion 2006
Indy 2013-16
PROX 2003-04
RMK 600 2002-16
Rush 600 2011-16
Switchback 2004-16
XC SP 2002-05
650 Indy 1988-91 Liquid Cooled 648
cc Triple CI
FL-1161
2346M06775 SK1089
67.75 Std. 8010 Pro-X
67.75mm 2.666” 2346M06800 68.00 .010 8011 Pro-X
(Non-skirted Cylinder) 2346M06825 SK1090 68.25 .020 8012 Pro-X
2346M06875 SK1091 68.75 .040 8014 Pro-X
2346M06925 SK1092 69.25 .060 8016 Pro-X
69.75 .080 8018 Pro-X
Special Heavy O.D. Sleeve CS
FL-1161H
(Allows Bore to 73mm) 67.75mm–73mm
650 Indy 1991-93 Liquid Cooled 648cc Triple
CI
FL-1199
2346M06775 SK1131
67.75 Std. 8010 Pro-X
(Extended Skirt Cylinder 67.75mm 2.666” 2346M06800 68.00 .010 8011 Pro-X
Same Ports as FL-1161) 2346M06825 SK1132 68.25 .020 8012 Pro-X
2346M06875 SK1133 68.75 .040 8014 Pro-X
2346M06925 SK1134 69.25 .060 8016 Pro-X
650 Indy RXL, SKS EFI 1991-97 648cc Triple CS
FL-1180
2346M06775 SK1089
67.75 Std. 8010 Pro-X
Liquid Cooled 67.75mm 2.666”
2346M06800 68.00 .010 8011 Pro-X
2346M06825 SK1090 68.25 .020 8012 Pro-X
2346M06875 68.75 .040 8014 Pro-X
2346M06925 SK1092 69.25 .060 8016 Pro-X
680 Ultra 1996-98 Liquid Cooled 679cc Triple AC
FL-1211
2366M06660
SK1191
66.60 Std.
SP, SKS, RMK, SPX, SPX SE, Touring 66.6mm 2.622”
700 Indy XCR 1998 Liquid Cooled 679cc Triple AC
FL-1211
66.6mm 2.622”
700 Indy XCR 1999 Liquid Cooled 700cc Triple AC
FL-1252
2409M06760
SK1288
67.60 Std.
(EC70PL) Variable Exhaust 67.5mm 2.657”
700 Indy XC, RMK 1997-05 700cc Twin AC
FL-1221
2399M08100
SK1272
81.00 Std. 7018DA
SKS 1997, 1999-03 81mm 3.188” 81.00 Std. 01.5799.000
XC SP 1999-05 Liquid Cooled
(Pro-X)
Classic 2000-04, PROX 2003-04
Edge 2004
Switchback 2004
Big Bore to 754cc 754cc Twin AC
FL-1221B
2408M08400
SK1289
84.00 .118
84mm 3.307”
700 R
MK 2006 Liberty / 755cc Twin AC
FL-1294
Classic 2006 Liquid Cooled 77.50mm 3.051”
Fusion 2006
Touring 2006
NO LONGER IN PRODUCTION
700 HO, IQ 2007-10 Liberty / 700cc Twin AC
FL-1301
2457M08100 SK1385
81.00 Std.
Dragon 2007-10 Liquid Cooled 81mm 3.188”
RMK 2007-10
750 Indy Storm 1993 Liquid Cooled 744cc Triple CI
FL-1189
69.72mm 2.745”
800 Indy Storm 1994-95 Liquid Cooled 794cc Triple CI
FL-1200
2355M07200
SK1159
72.00 Std.
72mm 2.835”
800 Indy Storm, SKS, RMK 1996-98 794cc Triple AC
FL-1215
2355M07300 SK1161 73.00 .040
Liquid Cooled 72mm 2.835”
Repair Sleeve for Broken Cylinder Skirt AC
FL-1215C
Big Bore to 861cc 861cc Triple AC
FL-1215B
2355M07500
75.00 .118
75mm 2.953”
800 Indy XCR 1999 Liquid Cooled 794cc Triple AC
FL-1253
2404M07200 SK1296
72.00 Std.
Variable Exhaust 72mm
2.835”
800 Indy XCR 2000-03 Liquid Cooled 794cc Triple AC
FL-1278
2404M07200 SK1296
72.00 Std.
Variable Exhaust 72mm 2.835”
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:32 PM Page 9
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-9--9-
L.A. SLeeve Co., InC.
562-945-7578
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
600 HO Edge 2002-2012 Liquid Cooled 599cc Twin AC
FL-1289
2437M07725
77.25 Std. 7017DA
600 IQ 2007-16 Case Reed 77.25mm 3.041”
(00-07 Carb) 77.25 Std. 01.5603.000
Classic Touring 2002-05
2462M07725
77.25 Std.
(Pro-X)
Dragon SP 2009 (07-14 CFI)
Edge 2004
Fusion 2006
Indy 2013-16
PROX 2003-04
RMK 600 2002-16
Rush 600 2011-16
Switchback 2004-16
XC SP 2002-05
650 Indy 1988-91 Liquid Cooled 648cc Triple CI
FL-1161
2346M06775 SK1089
67.75 Std. 8010 Pro-X
67.75mm 2.666” 2346M06800 68.00 .010 8011 Pro-X
(Non-skirted Cylinder) 2346M06825 SK1090 68.25 .020 8012 Pro-X
2346M06875 SK1091 68.75 .040 8014 Pro-X
2346M06925 SK1092 69.25 .060 8016 Pro-X
69.75 .080 8018 Pro-X
Special Heavy O.D. Sleeve CS
FL-1161H
(Allows Bore to 73mm) 67.75mm–73mm
650 Indy 1991-93 Liquid Cooled 648cc Triple CI
FL-1199
2346M06775 SK1131
67.75 Std. 8010 Pro-X
(Extended Skirt Cylinder 67.75mm 2.666” 2346M06800 68.00 .010 8011 Pro-X
Same Ports as FL-1161) 2346M06825 SK1132 68.25 .020 8012 Pro-X
2346M06875 SK1133 68.75 .040 8014 Pro-X
2346M06925 SK1134 69.25 .060 8016 Pro-X
650 Indy RXL, SKS EFI 1991-97 648cc Triple CS
FL-1180
2346M06775 SK1089
67.75 Std. 8010 Pro-X
Liquid Cooled 67.75mm 2.666”
2346M06800 68.00 .010 8011 Pro-X
2346M06825 SK1090 68.25 .020 8012 Pro-X
2346M06875 68.75 .040 8014 Pro-X
2346M06925 SK1092 69.25 .060 8016 Pro-X
680 Ultra 1996-98 Liquid Cooled 679cc Triple AC
FL-1211
2366M06660
SK1191
66.60 Std.
SP, SKS, RMK, SPX, SPX SE, Touring 66.6mm 2.622”
700 Indy XCR 1998 Liquid Cooled 679cc Triple AC
FL-1211
66.6mm 2.622”
700 Indy XCR 1999 Liquid Cooled 700cc Triple AC
FL-1252
2409M06760
SK1288
67.60 Std.
(EC70PL) Variable Exhaust 67.5mm 2.657”
700 Indy XC, RMK 1997-05 700cc Twin AC
FL-1221
2399M08100
SK1272
81.00 Std. 7018DA
SKS 1997, 1999-03 81mm 3.188” 81.00 Std. 01.5799.000
XC SP 1999-05 Liquid Cooled
(Pro-X)
Classic 2000-04, PROX 2003-04
Edge 2004
Switchback 2004
Big Bore to 754cc 754cc Twin AC
FL-1221B
2408M08400
SK1289
84.00 .118
84mm 3.307”
700 RMK 2006 Liberty / 755cc Twin AC
FL-1294
Classic 2006 Liquid Cooled 77.50mm 3.051”
Fusion 2006
Touring 2006
NO LONGER IN PRODUCTION
700 HO, IQ 2007-10 Liberty / 700cc Twin AC
FL-1301
2457M08100 SK1385
81.00 Std.
Dragon 2007-10 Liquid Cooled 81mm 3.188”
RMK 2007-10
750 Indy Storm 1993 Liquid Cooled 744cc Triple CI
FL-1189
69.72mm 2.745”
800 Indy Storm 1994-95 Liquid Cooled 794cc Triple CI
FL-1200
2355M07200
SK1159
72.00 Std.
72mm 2.835”
800 Indy Storm, SKS, RMK 1996-98 794cc Triple AC
FL-1215
2355M07300 SK1161 73.00 .040
Liquid Cooled 72mm 2.835”
Repair Sleeve for Broken Cylinder Skirt AC
FL-1215C
Big Bore to 861cc 861cc Triple AC
FL-1215B
2355M07500
75.00 .118
75mm 2.953”
800 Indy XCR 1999 Liquid Cooled 794cc Triple AC
FL-1253
2404M07200 SK1296
72.00 Std.
Variable Exhaust 72mm 2.835”
800 Indy XCR 2000-03 Liquid Cooled 794cc Triple AC
FL-1278
2404M07200 SK1296
72.00 Std.
Variable Exhaust 72mm 2.835”
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:32 PM Page 9
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-10--10-
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
800 Indy RMK 2000-05 Liberty 794cc Twin AC
FL-1263
2428M08500 SK1315
85.00 Std. 7019DA
XC SP 2001-05 Liquid Cooled 85mm 3.346” 85.00 Std. 01.5801.000
LE 2001, SKS 2003, PROX 2003
(Pro-X)
Edge 2004, Switchback 2004-05,
Classic 2004, Touring 2005
800 Indy RMK 2000-05 Power Valve 794cc Twin AC
FL-1311
2428M08500 SK1315
85.00 Std. 7019DA
XC SP 2001-05 Liberty 85mm 3.346” 85.00 Std. 01.5801.000
Classic, Touring 2004-05
(Pro-X)
Switchback 2004-05 Liquid Cooled
800 CFI 2008-11 Liberty 795cc Twin AC
FL-1308
2456M08500 SK1382
85.00 Std. 7044DA
800 IQ 2008-10 Liquid Cooled 85mm 3.346”
(08-09)
(08-09)
(08-09)
RMK 800 2008-11 Mono-Block
2459M08500
85.00 Std.
Rush 2011
(10-12)
Switchback 2009-11
Dragon SP 2009
800 Cleanfire SDI 2012-16 Liberty 794cc Twin AC
FL-1316
2459M08500
85.00 Std.
Indy SP 2015-16 Liquid Cooled 85mm 3.346”
Pro RMK 2012-15 Mono-Block
RMK Assault 2012-15 3022352 &
Rush Pro R 2012-14 3022449
Switchback Assault 2012-15
Switchback Pro R 2012-13
800 Cleanfire H.O. 2015-16 Liberty 794cc Twin AC
FL-1318
2459M08500
85.00 Std.
Rush Pro, Pro-X 2015-16 Liquid Cooled 85mm 3.346”
Switchback Pro-S, 3022554 &
Pro-X 2015-16 3022828
3S EV Power
Valve
900 Fusion 2005-06 Liberty 866cc Twin AC
FL-1288
2447M08300 SK1359
83.00 Std. 7020DA
900 RMK 2005-06 Liquid Cooled 83mm 3.267”
750 FST IQ 2006-14 4-Stroke 750cc Twin AC
FL-1295
40021M08500 SK1393
85.00 Std.
Switchback Liquid Cooled 85mm 3.346”
Classic, Cruiser
LX, Touring
Turbo Dragon, Widetrack IQ
785 Frontier 2003-05 4-Stroke 784cc Twin AC
FL-1282
Liquid Cooled 80mm 3.150”
247 Elan 1979-96 Fan Cooled 250cc Single RS
FL-1163
69.5mm 2.736”
253 Citation LS, LSE, E 1985-91 248cc Single CI
LA-1240
2373M07200
72.00 Std.
Tundra, LT, LTS 1985-92 Fan Cooled 72mm 2.835” (Straight sleeve, 2373M07250 72.50 .020
no flange)
2373M07300 73.00 .040
294 SS Elan 294cc Twin RS
FL-1134
57mm 2.244”
NO LONGER IN PRODUCTION
277 Tundra, LT, II, II LT 1993-96 269cc Single RS
FL-1136
Fan Cooled 72mm 2.835”
277 Tundra II LT 1997-98 Fan Cooled 269cc Single RS
FL-1229
280F, 300F, 2002-09
Tundra 1999, 2002-05, Tundra R 1998-2000
72mm 2.835” (O-Ring groove in flange)
340 TNT Rv Blizzard 1972-75 338cc Twin RS
FL-1055
63mm 2.480”
NO LONGER IN PRODUCTION
340 TNT Rv 1976-77 338cc Twin RS
FL-1130
Flange O.D. 3.415” 63mm 2.480”
NO LONGER IN PRODUCTION
340 1973-75 Free Air 339cc Twin RS
FL-1057
59.5mm 2.342”
NO LONGER IN PRODUCTION
340 1973-78 Fan Cooled 339cc Twin RS
FL-1103
59.5mm 2.342”
NO LONGER IN PRODUCTION
340 6500 Series Liquid Cooled 339cc Twin RS
FL-1110
59.5mm 2.342”
NO LONGER IN PRODUCTION
POLARIS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 10
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-11--11-
L.A. SLeeve Co., InC.
H
H
Fan Cooled 368cc Twin RS
62.00 Std.
62mm 2.441” 2308M06225 62.25 .010
2308M06250 62.50 .020
RS
2308M06300 63.00 .040
(O-Ring groove
in flange)
Fan Cooled 368cc Twin RS
62mm 2.441” (O-Ring groove
in flange)
399cc Twin RS
64.5mm 2.539” 2.742” O.D.
Fan Cooled 436cc Twin RS
67.5mm 2.658”
Fan Cooled 436cc Twin RS
67.5mm 2.658”
436cc Twin AC
Fan Cooled 67.5mm 2.658”
Liquid Cooled 440cc Twin RS
(‘79-82)
67.50 Std.
67.5mm 2.658” 2.900” O.D. 2374M06800 68.00 .020
Liquid Cooled 440cc Twin RS
67.5mm 2.658” 2.919” O.D
Liquid Cooled 436cc Twin AC
67.5mm 2.658”
NO LONGER IN PRODUCTION
Liquid Cooled 436cc Twin AC
67.5mm 2.658”
Liquid Cooled 440cc Twin RS
69.5mm 2.736”
NO LONGER IN PRODUCTION
Fan Cooled 436cc Twin RS
67.5mm 2.658”
Fan Cooled 436cc Twin RS
67.5mm 2.658”
436cc Twin AC
67.50 Std.
Liquid Cooled 67.5mm 2.658” 2375M06800 68.00 .020
Liquid Cooled 462cc Twin RS
69.50 Std.
69.5mm 2.736” 2312M06975 69.75 .010
Liquid Cooled 462cc Twin RS
2312M07000 70.00 .020
69.5mm 2.736” 2312M07050 70.50 .040
Fan Cooled 497cc Twin RS
72.00 Std.
72mm 2.834” 2373M07250 72.50 .020
2373M07300 73.00 .040
2373M07350 73.50 .060
Fan Cooled 497cc Twin RS
72mm 2.834”
(
O-Ring groove
in flange
)
SKI-DOO
(ROTAX)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 11
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-11--11-
L.A. SLeeve Co., InC.
H
H
Fan Cooled 368cc Twin RS
62.00 Std.
62mm 2.441” 2308M06225 62.25 .010
2308M06250 62.50 .020
RS
2308M06300 63.00 .040
(O-Ring groove
in flange)
Fan Cooled 368cc Twin RS
62mm 2.441” (O-Ring groove
in flange)
399cc Twin RS
64.5mm 2.539” 2.742” O.D.
Fan Cooled 436cc Twin RS
67.5mm 2.658”
Fan Cooled 436cc Twin RS
67.5mm 2.658”
436cc Twin AC
Fan Cooled 67.5mm 2.658”
Liquid Cooled 440cc Twin RS
(‘79-82)
67.50 Std.
67.5mm 2.658” 2.900” O.D. 2374M06800 68.00 .020
Liquid Cooled 440cc Twin RS
67.5mm 2.658” 2.919” O.D
Liquid Cooled 436cc Twin AC
67.5mm 2.658”
NO LONGER IN PRODUCTION
Liquid Cooled 436cc Twin AC
67.5mm 2.658”
Liquid Cooled 440cc Twin RS
69.5mm 2.736”
NO LONGER IN PRODUCTION
Fan Cooled 436cc Twin RS
67.5mm 2.658”
Fan Cooled 436cc Twin RS
67.5mm 2.658”
436cc Twin AC
67.50 Std.
Liquid Cooled 67.5mm 2.658” 2375M06800 68.00 .020
Liquid Cooled 462cc Twin RS
69.50 Std.
69.5mm 2.736” 2312M06975 69.75 .010
Liquid Cooled 462cc Twin RS
2312M07000 70.00 .020
69.5mm 2.736” 2312M07050 70.50 .040
Fan Cooled 497cc Twin RS
72.00 Std.
72mm 2.834” 2373M07250 72.50 .020
2373M07300 73.00 .040
2373M07350 73.50 .060
Fan Cooled 497cc Twin RS
72mm 2.834”
(
O-Ring groove
in flange
)
SKI-DOO
(ROTAX)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 11
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-12--12-
H
H
497cc Twin RS
72mm 2.835”
Type 494 499cc Twin RS
69.50 Std.
Liquid Cooled 69.5mm 2.736”
(
Rotary valve 2381M07000 SK1244 70.00 .020
motor
)
2381M07050 SK1245 70.50 .040
(Fits “494” Rotary Valve Motor only)
Type 493 499cc Twin RS
69.50 Std.
Liquid Cooled 69.5mm 2.736”
(
Reed motor
)
2436M07000 SK1323 70.00 .020
2436M07050 SK1324 70.50 .040
(Fits “493” Reed Valve Motor only)
521cc Twin RS
72.00 Std.
Liquid Cooled 72mm 2.834” 2373M07250 SK1212 72.50 .020
2373M07300 SK1213 73.00 .040
2373M07350 SK1214 73.50 .060
Liquid Cooled 521cc Twin RS
72mm 2.834” (O.A.L. 5.060”)
521cc Twin RS
Liquid Cooled 72mm 2.834” (O.A.L. 5.140”)
NO LONGER IN PRODUCTION
Fan Cooled 553cc Twin RS
76.00 Std. 01.5503.000
76mm 2.992” 2452M07650 SK1376 76.50 .020
(Pro-X)
580cc Twin RS
Liquid Cooled 76mm 2.992” (O.A.L. 5.140”)
NO LONGER IN PRODUCTION
617cc Twin RS
Liquid Cooled 76mm 2.992” (O.A.L. 5.265”)
NO LONGER IN PRODUCTION
580cc Twin RS
76mm 2.992”
NO LONGER IN PRODUCTION
(No R.A.V.E.valve) Liquid Cooled
580cc Twin RS
(Full length intake skirt) Liquid Cooled 76mm 2.992”
580cc Twin RS
Liquid Cooled 76mm 2.992” (O.A.L. 5.140”)
NO LONGER IN PRODUCTION
580cc Twin RS
Liquid Cooled 76mm 2.992”
NO LONGER IN PRODUCTION
580cc Twin RS
Liquid Cooled 76mm 2.992”
Liquid Cooled 618cc Twin RS
76mm 2.992”
NO LONGER IN PRODUCTION
594cc Twin AC
72.00 Std. 01.5600.000
Liquid Cooled 72mm 2.834” (Piston skirt coated)
(Pro-X)
SKI-DOO
(ROTAX)
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 12
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-13--13-
L.A. SLeeve Co., InC.
H
H
594cc Twin AC
72.00 Std. 01.5600.000
Liquid Cooled 72mm 2.834”
(Pro-X)
594cc Twin AC
Liquid Cooled 72mm 2.834”
594cc Twin AC
72.00 Std.
Liquid Cooled 72mm 2.834”
Liquid Cooled 598cc Triple AC
64.50 Std.
64.5mm 2.539”
597cc Twin RS
76.00 Std.
Liquid Cooled 76.00 Std. 01.5699.000
76mm 2.992” 2411M07650 SK1303 76.50 .020
(Pro-X)
2411M07700 SK1304 77.00 .040
669cc Twin RS
Liquid Cooled 78mm 3.071”
NO LONGER IN PRODUCTION
669cc Twin RS
78.00 Std.
Liquid Cooled 78mm 3.071” 2379M07850 SK1237 78.50 .020
2379M07900 SK1238 79.00 .040
Big Bore to 739cc 739cc Twin
82mm 3.228”
669cc Twin RS
78.00 Std.
Liquid Cooled 78mm 3.071” 2433M07850
SK1312
78.50 .020
2433M07900
SK1313
79.00 .040
669cc Twin RS
78.00 Std.
Liquid Cooled 78
mm 3.071” 2433M07850 SK1312 78.50 .020
(Notched Exhaust Port)
2433M07900 SK1313 79.00 .040
698cc Twin AC
78.00 Std. 01.5700.000
Liquid Cooled 78mm 3.071” 2416M07900
SK1356
79.00 .040
(Pro-X)
699cc Triple AC
69.75 Std.
Liquid Cooled 69.75mm 2.745”
SKI-DOO
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 13
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-13--13-
L.A. SLeeve Co., InC.
H
H
594cc Twin AC
72.00 Std. 01.5600.000
Liquid Cooled 72mm 2.834”
(Pro-X)
594cc Twin AC
Liquid Cooled 72mm 2.834”
594cc Twin AC
72.00 Std.
Liquid Cooled 72mm 2.834”
Liquid Cooled 598cc Triple AC
64.50 Std.
64.5mm 2.539”
597cc Twin RS
76.00 Std.
Liquid Cooled 76.00 Std. 01.5699.000
76mm 2.992” 2411M07650 SK1303 76.50 .020
(Pro-X)
2411M07700 SK1304 77.00 .040
669cc Twin RS
Liquid Cooled 78mm 3.071”
NO LONGER IN PRODUCTION
669cc Twin RS
78.00 Std.
Liquid Cooled 78mm 3.071” 2379M07850 SK1237 78.50 .020
2379M07900 SK1238 79.00 .040
Big Bore to 739cc 739cc Twin
82mm 3.228”
669cc Twin RS
78.00 Std.
Liquid Cooled 78mm 3.071” 2433M07850
SK1312
78.50 .020
2433M07900
SK1313
79.00 .040
669cc Twin RS
78.00 Std.
Liquid Cooled 78mm 3.071”
2433M07850 SK1312 78.50 .020
(Notched Exhaust Port)
2433M07900 SK1313 79.00 .040
698cc Twin AC
78.00 Std. 01.5700.000
Liquid Cooled 78mm 3.071” 2416M07900
SK1356
79.00 .040
(Pro-X)
699cc Triple AC
69.75 Std.
Liquid Cooled 69.75mm 2.745”
SKI-DOO
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:33 PM Page 13
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-14--14-
H
H
775cc Twin RS
82mm 3.228”
NO LONGER IN PRODUCTION
Free Air 776cc Twin RS
81.88mm 3.220”
NO LONGER IN PRODUCTION
774cc Triple RS
69.50 Std.
Liquid Cooled 69.5mm 2.736” 2434M07000 SK1240 70.00 .020
2434M07050 SK1241 70.50 .040
2434M07100 SK1199 71.00 .060
2434M07200 72.00 .100
Big Bore to 889cc 889cc Triple CS
74.50 .196
74.5mm 2.933”
796cc Triple AC
70.50 Std.
70.5mm 2.776”
Liquid Cooled
Big Bore to 889cc 889cc Triple CS
74.50 .157
74.5mm 2.933”
799cc Twin AC
82.00 Std.
Liquid Cooled 82mm 3.228” 82.00 Std. 01.5800.000
(Reed Valve) 2430M08300 SK1347 83.00 .040
(Pro-X)
82.00 Std.
799cc Twin AC
82.00 Std.
Liquid Cooled 82mm 3.228” 01.5808.000
Mono-Block (Reed Valve)
(Pro-X)
799cc Twin AC
82.00 Std. 01.5808.000
Liquid Cooled 82mm 3.228”
Mono-Block
998cc Twin AC
88.00 Std.
Liquid Cooled 88mm 3.464”
Monoblock
4-Stroke 600cc Twin AC
Liquid Cooled 74mm 2.913”
4-Stroke V-Twin 800cc AC
Liquid Cooled 91mm 3.583”
4-Stroke V-Twin AC
Liquid Cooled 100mm 3.937”
4-Stroke 1170cc Triple AC
91.00 Std.
Liquid Cooled 91mm 3.583”
4-Stroke 1494cc Triple AC
Liquid Cooled 100mm 3.937”
SKI-DOO
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 14
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-15--15-
L.A. SLeeve Co., InC.
H
H
246cc Single CI
Fan Cooled 70mm 2.755” Straight sleeve, no flange
294cc Twin CI
56mm 2.204”
NO LONGER IN PRODUCTION
Liquid Cooled 293cc Single CS
73mm 2.874”
NO LONGER IN PRODUCTION
Liquid Cooled 337cc Twin AC
60mm 2.362”
NO LONGER IN PRODUCTION
338cc Twin CI
60mm 2.362”
NO LONGER IN PRODUCTION
Fan Cooled 337cc Twin CI
60mm 2.362”
NO LONGER IN PRODUCTION
408cc Twin CS
(
#85T
)
Fan Cooled 66mm 2.598”
NO LONGER IN PRODUCTION
433cc Twin CS
Reed Valve 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin CS
Piston
Port 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin CS
Piston Port 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin AC
68mm 2.677”
NO LONGER IN PRODUCTION
Liquid Cooled 439cc Twin AC
68.50 Std.
68.5mm 2.697”
NO LONGER IN PRODUCTION
Liquid Cooled 437cc Twin AC
66mm 2.598”
NO LONGER IN PRODUCTION
433cc Twin CS
68.00 Std.
68mm 2.677”
NO LONGER IN PRODUCTION
Fan Cooled 437cc Twin CI
66mm 2.598”
NO LONGER IN PRODUCTION
Fan Cooled 485cc Twin CS
72.00 Std. 01.2599.000
(
#8VO
)
72mm 2.835” 2310M07225 72.25 .010
2310M07250 SK1036 72.50 .020 01.2599.050
2310M07300 SK1037 73.00 .040
2310M07350 SK1052 73.50 .060
Fan Cooled 485cc Twin CS
72.00 Std. 01.2599.000
72mm 2.835” 2310M07225 72.25 .010
- 2310M07250 SK1299 72.50 .020 01.2599.050
2310M07300 SK1290 73.00 .040
Liquid Cooled 493cc Twin AC
68.00 Std.
68mm 2.677”
Liquid Cooled 494cc Twin AC
(
#8CJ
)
68mm 2.677”
Big Bore to 600cc 598cc Twin AC
74.8mm 2.945”
Fan Cooled 535cc Twin CS
73.00 Std.
73m
m 2.874” 2305M07325 73.25 .010
2305M07350 SK1045 73.50 .020
2305M07400 SK1046 74.00 .040
2305M07450 SK1047 74.50 .060
Liquid Cooled 535cc Twin AC
73mm 2.874”
Fan Cooled 535cc Twin CI
73.00 Std.
(
#83R
)
73mm 2.874” 2305M07325 73.25 .010
2305M07350 SK1045 73.50 .020
2305M07400 SK1046 74.00 .040
2305M0745
0 SK1047 74.50 .060
Liquid Cooled 569cc Twin CS
73.00 Std.
(
#82M
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
Liquid Cooled 569cc Twin AC
73.00 Std.
(
#88R
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
YAMAHA
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 15
WISECO Piston includes rings and circlips, includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
-15--15-
L.A. SLeeve Co., InC.
H
H
246cc Single CI
Fan Cooled 70mm 2.755” Straight sleeve, no flange
294cc Twin CI
56mm 2.204”
NO LONGER IN PRODUCTION
Liquid Cooled 293cc Single CS
73mm 2.874”
NO LONGER IN PRODUCTION
Liquid Cooled 337cc Twin AC
60mm 2.362”
NO LONGER IN PRODUCTION
338cc Twin CI
60mm 2.362”
NO LONGER IN PRODUCTION
Fan Cooled 337cc Twin CI
60mm 2.362”
NO LONGER IN PRODUCTION
408cc Twin CS
(
#85T
)
Fan Cooled 66mm 2.598”
NO LONGER IN PRODUCTION
433cc Twin CS
Reed Valve 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin CS
Piston Port 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin CS
Piston Port 68mm 2.677”
NO LONGER IN PRODUCTION
433cc Twin AC
68mm 2.677”
NO LONGER IN PRODUCTION
Liquid Cooled 439cc Twin AC
68.50 Std.
68.5mm 2.697”
NO LONGER IN PRODUCTION
Liquid Cooled 437cc Twin AC
66mm 2.598”
NO LONGER IN PRODUCTION
433cc Twin CS
68.00 Std.
68mm 2.677”
NO LONGER IN PRODUCTION
Fan Cooled 437cc Twin CI
66mm 2.598”
NO LONGER IN PRODUCTION
Fan Cooled 485cc Twin CS
72.00 Std. 01.2599.000
(
#8VO
)
72mm 2.835” 2310M07225 72.25 .010
2310M07250 SK1036 72.50 .020 01.2599.050
2310M07300 SK1037 73.00 .040
2310M07350 SK1052 73.50 .060
Fan Cooled 485cc Twin CS
72.00 Std. 01.2599.000
72mm 2.835” 2310M07225 72.25 .010
- 2310M07250 SK1299 72.50 .020 01.2599.050
2310M07300 SK1290 73.00 .040
Liquid Cooled 493cc Twin AC
68.00 Std.
68mm 2.677”
Liquid Cooled 494cc Twin AC
(
#8CJ
)
68mm 2.677”
Big Bore to 600cc 598cc Twin AC
74.8mm 2.945”
Fan Cooled 535cc Twin CS
73.00 Std.
73mm 2.874” 2305M07325 73.25 .010
2305M07350 SK1045 73.50 .020
2305M07400 SK1046 74.00 .040
2305M07450 SK1047 74.50 .060
Liquid Cooled 535cc Twin AC
73mm 2.874”
Fan Cooled 535cc Twin CI
73.00 Std.
(
#83R
)
73mm 2.874” 2305M07325 73.25 .010
2305M07350 SK1045 73.50 .020
2305M07400 SK1046 74.00 .040
2305M07450 SK1047 74.50 .060
Liquid Cooled 569cc Twin CS
73.00 Std.
(
#82M
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
Liquid Cooled 569cc Twin AC
73.00 Std.
(
#88R
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
YAMAHA
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 15
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-16--16-
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
Exciter 570 SX 1993 Liquid Cooled 569cc Twin AC
FL-1196
2335M07300 SK1094
73.00 Std.
(
#8AY
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
v-Max 600 1994-96 Liquid Cooled 598cc Twin AC
FL-1198
2388M07480 SK1257
74.80 Std. 7025DA
(
#8CA
)
74.8mm 2.945” 2388M07530 SK1258 75.30 .020
v-Max 600 1999 Liquid Cooled 598cc Twin AC
FL-1227
2388M07480 SK1257
74.80 Std. 7025DA
v-Max 600 SX, XT, XTC Deluxe 1997-98 74.8mm 2.945” 2388M07530 SK1258 75.30 .020
venture 600 1997-98
Mountain Max 600 1997-99
(
#8CR
)
SRX-600 1998-99 Liquid Cooled 598cc Triple AC
FL-1238
Variable Exhaust 64mm 2.519”
NO LONGER IN PRODUCTION
v-Max 600 SX 1999 Liquid Cooled 593cc Triple AC
FL-1258
2440M06500 SK1332
65.00 Std.
v-Max 600 Deluxe 1999-01 65mm 2.559”
v-Max 600 ER 2002-03
venture 600 1999-06
Mountain Max 600, SX 600R 2000-03
SX venom 2004-06
v-Max 700, XT, XTC, SX 698cc Triple AC
FL-1226
2385M07050 SK1251
70.50 Std. 7026DA
v-Max Deluxe 1997-01 70.5mm 2.776”
v-Max 700 ER 2002
Mountain Max 700 1997-04
venture 700 1998-03, SX 700R 2000-01
(
#8CH
)
Liquid Cooled
Big Bore to 748cc 748cc Triple AC
FL-1226B
9385P7290
73.00 .098
73mm 2.874”
SRX-700 1998-02 Liquid Cooled 696cc Triple AC
FL-1239
2397M06900 SK1270
69.00 Std. 7027DA
Variable Exhaust 69mm 2.716” 69.00 Std. 01.2798.000
(#8DN)
(Pro-X)
SX viper 700 2002-05 Liquid Cooled 696cc Triple AC
FL-1296
2397M06900
69.00 Std. 01.2798.000
venture 700 2004 Variable Exhaust 69mm 2.716”
(Pro-X)
(#8EK)
v-Max 4 1992-94 Liquid Cooled 743cc 4-Cylinder AC
FL-1183
(
#89A
)
63mm 2.480”
NO LONGER IN PRODUCTION
v-Max 800 1995-97 Liquid Cooled 791cc 4-Cylinder AC
FL-1210
65mm 2.559”
NO LONGER IN PRODUCTION
Genesis 80 FI 4-Stroke 499cc Twin AC
FL-1303
12.5:1 Compression
Nytro 2006-07 Liquid Cooled 77mm 3.031”
4988M07700
SK1389
77.00 Std.
Phazer 500 2007-16
venture MP 2013
venture Lite 2007-09
vK Professional 2006-07
Genesis 120FI 4-Stroke 973cc Triple AC
FL-1290
12.5:1 Compression
RS vector 2005-09 Liquid Cooled 79mm 3.110”
4893M07900 SK1365
79.00 Std.
RS Rage 2005-07
RS vector Mountain 2005-07
9.5:1 Compression
RS venture 2005-09
4894M07900 SK1367
79.00 Std.
vK Pro 2006-15
Genesis 130FI 4-Stroke 1049cc Triple AC
FL-1304
4893M08200 SK1366
82.00 Std.
FX Nytro 2008-14 Liquid Cooled 82mm 3.228” (Left)
RS vector 2012-16
LA-1304
RS venture 2012-16 (Center, Right)
SR viper 2014-16
vK Professional II 2016
RX-1 2003-07 4-Stroke 998cc 4-Cylinder AC
YA-5501
4707M07400 SK1326
74.00 Std.
Straight Sleeve Liquid Cooled 74mm 2.913”
Big Bore to 1080cc
1080cc
4-Cylinder AC
YA-5501E
77mm 3.031”
(
End Sleeves,
2 required
)
YA-5501C
(
Center Sleeves,
2 required
)
Genesis 150FI 4-Stroke 998cc 4-Cylinder AC
YA-5501
APEX 2006-16 Liquid Cooled 74mm 2.913”
ATTAK 2006-07
YAMAHA
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 16
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-17--17-
L.A. SLeeve Co., InC.
562-945-7578
PRO-X CONNECTING ROD KITS
SKI-Doo (RoTAX)
Part No. Model Year
02514
377 Twin 1980-89
02515 377 Twin 1990-99
440F MXZ Twin 1997-99
02906 462, 467 Twin 1994-95
Formula Z, MX (’93-95)
Formula Z, Mach (’93-95)
MXZ, XTCR (
’
93-95)
470 Twin 1994
02522 521, 534, 537 Twin 1982-90
9700 (‘83-84)
Formula Plus, LT (’85-90)
Safari Grand Lux (’85-86)
582, 583 Twin 1989-99
Mach I (’89-91)
Formula (’92-99)
Formula Z, STX II (’94-99)
Summ
it (’94-98)
MXZ (’96-98)
Grand Touring 580 (’95-99)
617 Twin 1994-95
02905 599 Triple PTO Side 1997-99
02906 599 Triple MAG/Center 1997-99
Formula III 600
02663 779 Triple PTO Side 1994-96
02664 779 Triple MAG/Center 1994-96
02663 809 Triple PTO Side 1997-03
02664 809 Triple MAG/Center 1997-03
CRANKSHAFT BEARINGS
Size DeScription part no.
17 x 47 x 14
6303C3
20 x 47 x 14 6204C3
20 x 47 x 14 Grooved, With Ring 6204NR
20 x 52 x 15 6304C3
22 x 50 x 14 6222C4
22 x 56 x 16 6322C4
22 x 56 x 16 6322X
25 x 52 x 15 6205C3
25 x 52 x 15 Grooved 6205N
25 x 52 x 15 Grooved, With Ring 6205NR
25 x 55 x 15 83A915
25 x 62 x 16 6305RI
25 x 62 x 17 6305C3
25 x 62 x 17 Grooved 6305N
25 x 62 x 17 Grooved, With Ring 6305NR
25 x 62 x 17 Grooved, Pinned 83406
25 x 62 x 17 Pinned 83464A
28 x 58 x 16 6228C3
28 x 68 x 18 6328C3
28 x 68 x 18 Shield 6328LBA
28 x 72 x 18 B32872
30 x 62 x 16 Grooved, C4 Fit 6206NC4
Size DeScription part no.
30 x 62 x 16 8 Bearings 6206RI
30 x 62 x 16 9 Bearings 6206C3
30 x 62 x 16 Grooved 6206N
30 x 62 x 16 Grooved, With Ring 6206NR
30 x 62 x 16 Grvd, W/Ring, C4 Fit 6206NRC4
30 x 62 x 16 Roller Bearing NJ206
30 x 64 x 16 O.D. Step 830046
30 x 72 x 16 O.D. Step SX06C62
30 x 72 x 18 6306RI
30 x 72 x 19 6306C3
30 x 72 x 19 Grooved 6306N
30 x 72 x 19 Grooved, With Ring 6306NR
30 x 72 x 19 O.D. Step SX06C42
30 x 76 x 17.5 692C3
32 x 65 x 17 6232C3
32 x 72 x 30 Phenalic, 4mm Pinhole 83B207
32 x 76 x 17.5 SC093CS
35 x 72 x 17 6207C3
35 x 72 x 17 C4 Fit 6207C4
35 x 72 x 17 Grooved 6207N
35 X 72 X 17 Grooved, C4 Fit 6207NC4
35 x 72 x 17 Grooved, With Ring 6207NR
Size DeScription part no.
35 x 72 x 17 Grvd, W/Ring C4 fit 6207NRC4
35 x 72 x 17 4mm Pinhole 6207YR
35 x 72 x 17 Pinned 6207JRC4
35 x 72 x 17 Pinned, 3mm 83A844A
35 x 72 x 17 Pinned,
3mm Grooved W/Ring 6207NLT
35 x 72 x 27 Pinned, 3mm 5207-1LT
35 x 80 x 18 6307X
35 x 80 x 18.5 6307A
35 x 80 x 21 6307C3
35 x 80 x 21 Grooved 6307N
35 x 80 x 21 Grooved, 5mm Pinhole 83B727
35 x 80 x 21 Grooved, With Ring 6307NR
35 x 80 x 21 Pinned 6307JRC4
35 x 80 x 21 Pinned, 3mm 83A948
39 x 58 x 16 Needle Bearings 8ENK16
39 x 65 x 18 Needle Bearings 2MEB671
40 x 76 x 17.5 DG407618
40 x 80 x 18 Grooved, With Ring 6208NC4
40 x 90 x 23 6308C3
40 x 90 x 20
CRANKSHAFT MAIN BEARINGS DIMENSIONS CHART
L.A. SLEEVE CO. supplies genuine O.E.M. quality replacement crankshaft
bearings. Manufactured in Japan using all O.E.M. specifications.
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 17
Metric conversion: 1mm = .03937"
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-16--16-
SLEEvE
Model
cc/ Cyl. I.D.
H
Piston Kit mm Size Piston
H
Exciter 570 SX 1993 Liquid Cooled 569cc Twin AC
FL-1196
2335M07300 SK1094
73.00 Std.
(
#8AY
)
73mm 2.874” 2335M07350 SK1095 73.50 .020
2335M07400 SK1096 74.00 .040
v-Max 600 1994-96 Liquid Cooled 598cc Twin AC
FL-1198
2388M07480 SK1257
74.80 Std. 7025DA
(
#8CA
)
74.8mm 2.945” 2388M07530 SK1258 75.30 .020
v-Max 600 1999 Liquid Cooled 598cc Twin AC
FL-1227
2388M07480 SK1257
74.80 Std. 7025DA
v-Max 600 SX, XT, XTC Deluxe 1997-98 74.8mm 2.945” 2388M07530 SK1258 75.30 .020
venture 600 1997-98
Mountain Max 600 1997-99
(
#8CR
)
SRX-600 1998-99 Liquid Cooled 598cc Triple AC
FL-1238
Variable Exhaust 64mm 2.519”
NO LONGER IN PRODUCTION
v-Max 600 SX 1999 Liquid Cooled 593cc Triple AC
FL-1258
2440M06500 SK1332
65.00 Std.
v-Max 600 Deluxe 1999-01 65mm 2.559”
v-Max 600 ER 2002
-03
venture 600 1999-06
Mountain Max 600, SX 600R 2000-03
SX venom 2004-06
v-Max 700, XT, XTC, SX 698cc Triple AC
FL-1226
2385M07050 SK1251
70.50 Std. 7026DA
v-Max Deluxe 1997-01 70.5mm 2.776”
v-Max 700 ER 2002
Mountain Max 700 1997-04
venture 700 1998-03, SX 700R 2000-01
(
#8CH
)
Liquid Cooled
Big Bore to 748cc 748cc Triple AC
FL-1226B
9385P7290
73.00 .098
73mm 2.874”
SRX-700 1998-02
Liquid Cooled 696cc Triple AC
FL-1239
2397M06900 SK1270
69.00 Std. 7027DA
Variable Exhaust 69mm 2.716” 69.00 Std. 01.2798.000
(#8DN)
(Pro-X)
SX viper 700 2002-05 Liquid Cooled 696cc Triple AC
FL-1296
2397M06900
69.00 Std. 01.2798.000
venture 700 2004 Variable Exhaust 69mm 2.716”
(Pro-X)
(#8EK)
v-Max 4 1992-94 Liquid Cooled 743cc 4-Cylinder AC
FL-1183
(
#89A
)
63mm 2.480”
NO LONGER IN PRODUCTION
v-Max 800 1995-97 Liquid Cooled 791cc 4-Cylinder AC
FL-1210
65mm 2.559”
NO LONGER IN PRODUCTION
Genesis 80 FI 4-Stroke 499cc Twin AC
FL-1303
12.5:1 Compression
Nytro 2006-07 Liquid Cooled 77mm 3.031”
4988M07700
SK1389
77.00 Std.
Phazer 500 2007-16
venture MP 2013
venture Lite 2007-09
vK Professional 2006-07
Genesis 120FI 4-Stroke 973cc Triple AC
FL-1290
12.5:1 Compression
RS vector 2005-09 Liquid Cooled 79mm 3.110”
4893M07900 SK1365
79.00 Std.
RS Rage 2005-07
RS vector Mountain 2005-07
9.5:1 Compression
RS venture 2005-09
4894M07900 SK1367
79.00 Std.
vK Pro 2006-15
Genesis 130FI 4-Stroke 1049cc Triple AC
FL-1304
4893M08200 SK1366
82.00 Std.
FX Nytro 2008-14 Liquid Cooled 82mm 3.228” (Left)
RS vector 2012-16
LA-1304
RS venture 2012-16 (Center, Right)
SR viper 2014-16
vK Professional II 2016
RX-1 2003-07 4-Stroke 998cc 4-Cylinder AC
YA-5501
4707M07400 SK1326
74.00 Std.
Straight Sleeve Liquid Cooled 74mm 2.913”
Big Bore to 1080cc
1080cc
4-Cylinder AC
YA-5501E
77mm 3.031”
(
End Sleeves,
2 required
)
YA-5501C
(
Center Sleeves,
2 required
)
Genesis 150FI 4-Stroke 998cc 4-Cylinder AC
YA-5501
APEX 2006-16 Liquid Cooled 74
mm 2.913”
ATTAK 2006-07
YAMAHA
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 16
WISECO Piston includes rings and circlips, Kit includes precision matched and balanced pistons, gasket.
L.A. SLeeve Co., InC.
562-945-7578
Order Toll Free 1-800-822-6005
-17--17-
L.A. SLeeve Co., InC.
562-945-7578
PRO-X CONNECTING ROD KITS
SKI-Doo (RoTAX)
Part No. Model Year
02514
377 Twin 1980-89
02515 377 Twin 1990-99
440F MXZ Twin 1997-99
02906 462, 467 Twin 1994-95
Formula Z, MX (’93-95)
Formula Z, Mach (’93-95)
MXZ, XTCR (
’
93-95)
470 Twin 1994
02522 521, 534, 537 Twin 1982-90
9700 (‘83-84)
Formula Plus, LT (’85-90)
Safari Grand Lux (’85-86)
582, 583 Twin 1989-99
Mach I (’89-91)
Formula (’92-99)
Formula Z, STX II (’94-99)
Summit (’94-98)
MXZ (’96-98)
Grand Touring 580 (’95-99)
617 Twin 1994-95
02905 599 Triple PTO Side 1997-99
02906 599 Triple MAG/Center 1997-99
Formula III 600
02663 779 Triple PTO Side 1994-96
02664 779 Triple MAG/Center 1994-96
02663 809 Triple PTO Side 1997-03
02664 809 Triple MAG/Center 1997-03
CRANKSHAFT BEARINGS
Size DeScription part no.
17 x 47 x 14
6303C3
20 x 47 x 14 6204C3
20 x 47 x 14 Grooved, With Ring 6204NR
20 x 52 x 15 6304C3
22 x 50 x 14 6222C4
22 x 56 x 16 6322C4
22 x 56 x 16 6322X
25 x 52 x 15 6205C3
25 x 52 x 15 Grooved 6205N
25 x 52 x 15 Grooved, With Ring 6205NR
25 x 55 x 15 83A915
25 x 62 x 16 6305RI
25 x 62 x 17 6305C3
25 x 62 x 17 Grooved 6305N
25 x 62 x 17 Grooved, With Ring 6305NR
25 x 62 x 17 Grooved, Pinned 83406
25 x 62 x 17 Pinned 83464A
28 x 58 x 16 6228C3
28 x 68 x 18 6328C3
28 x 68 x 18 Shield 6328LBA
28 x 72 x 18 B32872
30 x 62 x 16 Grooved, C4 Fit 6206NC4
Size DeScription part no.
30 x 62 x 16 8 Bearings 6206RI
30 x 62 x 16 9 Bearings 6206C3
30 x 62 x 16 Grooved 6206N
30 x 62 x 16 Grooved, With Ring 6206NR
30 x 62 x 16 Grvd, W/Ring, C4 Fit 6206NRC4
30 x 62 x 16 Roller Bearing NJ206
30 x 64 x 16 O.D. Step 830046
30 x 72 x 16 O.D. Step SX06C62
30 x 72 x 18 6306RI
30 x 72 x 19 6306C3
30 x 72 x 19 Grooved 6306N
30 x 72 x 19 Grooved, With Ring 6306NR
30 x 72 x 19 O.D. Step SX06C42
30 x 76 x 17.5 692C3
32 x 65 x 17 6232C3
32 x 72 x 30 Phenalic, 4mm Pinhole 83B207
32 x 76 x 17.5 SC093CS
35 x 72 x 17 6207C3
35 x 72 x 17 C4 Fit 6207C4
35 x 72 x 17 Grooved 6207N
35 X 72 X 17 Grooved, C4 Fit 6207NC4
35 x 72 x 17 Grooved, With Ring 6207NR
Size DeScription part no.
35 x 72 x 17 Grvd, W/Ring C4 fit 6207NRC4
35 x 72 x 17 4mm Pinhole 6207YR
35 x 72 x 17 Pinned 6207JRC4
35 x 72 x 17 Pinned, 3mm 83A844A
35 x 72 x 17 Pinned,
3mm Grooved W/Ring 6207NLT
35 x 72 x 27 Pinned, 3mm 5207-1LT
35 x 80 x 18 6307X
35 x 80 x 18.5 6307A
35 x 80 x 21 6307C3
35 x 80 x 21 Grooved 6307N
35 x 80 x 21 Grooved, 5mm Pinhole 83B727
35 x 80 x 21 Grooved, With Ring 6307NR
35 x 80 x 21 Pinned 6307JRC4
35 x 80 x 21 Pinned, 3mm 83A948
39 x 58 x 16 Needle Bearings 8ENK16
39 x 65 x 18 Needle Bearings 2MEB671
40 x 76 x 17.5 DG407618
40 x 80 x 18 Grooved, With Ring 6208NC4
40 x 90 x 23 6308C3
40 x 90 x 20
CRANKSHAFT MAIN BEARINGS DIMENSIONS CHART
L.A. SLEEVE CO. supplies genuine O.E.M. quality replacement crankshaft
bearings. Manufactured in Japan using all O.E.M. specifications.
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 17
ENGINE & SHOP SERVICES
CYLINDER RE-PLATING
L.A. Sleeve offers a full
cylinder re-plating service
for the rider who desires to
maintain the original plated
bore. We will strip, weld and
repair the damaged bore,
then re-plate the cylinder
bore with Nickel-Silicon-
Carbide plating. L.A. Sleeve
will supply you with a new
piston and gasket kit and
size the piston to the freshly
plated bore.
CRANKSHAFT REBUILDING
We provide complete crank rebuilding to you.
No need to buy an OEM crankshaft, when we
can install a new aftermarket connecting
rod kit. Our service comes complete with
pressing crank apart, inspecting web
journals, reinstalling new aftermarket rod kit
and truing crank to exact tolerances.
4-STROKE HEAD SERVICE, REPAIR
AND CNC PORTING
L.A. Sleeve is a leader in four-stroke development
technology. Our years of experience will assure you receive
the proper service required.
We will disassemble,
inspect, rebuild and re-
assemble your head. L.A.
Sleeve uses state of the art
CNC machinery to do head porting and valve work. We
are able to perform a standard 3-angle valve job or a
performance 5-angle radius valve job. We can replace
worn valve guides or install high performance guides.
Let us replace your iron valve seats with our copper/
beryllium seats to insure reliability and longevity of
your steel or titanium valves.
CYLINDER REPAIR
Why would you spend several
hundred dollars to buy a new
cylinder when we can repair
it for a fraction of the cost?
Sleeving...
Still The Solution!
Re-sleeving worn or seized
cylinders and cylinder blocks
with cylinder sleeve liners
manufactured by L.A. Sleeve
Co. continues to be the solution for riders, racer, and engine builders
everywhere. Our top quality cylinder sleeves, four-stroke and two-stroke,
have proven to be durable and economical with the added advantage of
being boreable. Re-sleeved cylinders will never flake or peel.
L.A. Sleeve offers re-sleeving
services for automotive,
small engine, motorcycle,
ATV, snowmobile, marine and
watercraft.
Four-stroke cylinders receive a
newly installed cylinder sleeve,
are bored, honed to fit the piston
and the top is surfaced when
required.
Two-stroke cylinders receive
a newly installed sleeve. All of the ports are matched, blended and
chamfered. The sleeved cylinder is bored and honed to fit the piston. The
top deck is surfaced to be as new. A properly installed two-stroke sleeve
renews the cylinder and retains the original performance of the engine.
Send us your cylinder or cylinder block along with instructions. Our
sleeving department will install a new sleeve or multiple sleeves into your
cylinder and return it ready to install and run.
2016 CYLINDER DEPARTMENT BASIC SERVICE FEES
Rates shown are for labor only, parts are additional.
RETAIL PRICE
Sleeve Installation - two stroke single cylinder .................................$165.00
(Includes installing sleeve, matching ports, chamfering port edges, boring and honing
to size piston, milling top deck )
Sleeve Installation - four stroke single cylinder .................................$148.00
(Includes installing sleeve, boring and honing to size piston, milling top deck)
Sleeve Installation - Big Bore two stroke sleeve .................................$180.00
Sleeve Installation - Big Bore four stroke sleeve ................................$165.00
Cylinder Re-plating ............................................................................$265.00
Head Mod - two stroke........................................................................$100.00
Boring / Honing - single .......................................................................$70.00
Porting / Polish - two stroke single.....................................................$350.00
Porting/Polish Cylinder with Head Mod 2-stroke ...............................$425.00
Head Flow Port & Polish - four stroke 2-valve ...................begins @ $355.00
4-valve ....................begins @ $500.00
5-valve ....................begins @ $560.00
Valve Job - 2 valve ............................................................begins @ $127.50
Valve Job - 4 valve .............................................................begins @ $180.00
Valve Job – 5 valve .............................................................begins @ $210.00
Valve Guide Replacement .............................................. without guide $34.00
Valve Seat Replacement .................................................. without seat $72.00
Race Performance Valve Seats .................................................. Call for Quote
Valve and Spring Kits ................................................................ Call for Quote
Crankshaft Rebuilding – Single ..........................................................$87.00
Twin...........................................................$185.00
Triple .........................................................$270.00
4-Stroke Crank with oilers ..................................................................$100.00
Additional Charges for:
Stud Removal ......................................................................................$28.00
Power Valve - removal, cleanse, re-install. .........................................$65.00
SPECIAL applications have additional charges and will be quoted before any work begins.
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
H AC=Alloy-Chrome Cylinder Bore, CC=Original Barrel is Cast-Iron,
CS=Cast-In Sleeve, CI=Cast-In Sleeve Liner, RS=Replacement Sleeve
-18--18-
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 18
BUSINESS HOURS: 8:00 a.m. to 5:00 p.m. Monday through Thursday,
8:00 a.m. to 4:30 p.m. Friday. Closed weekends and holidays.
MINIMUM ORDERS: A $15.00 minimum applies to all orders.
PAYMENT: C.O.D., Credit/Debit on first order. Company check
accepted after first order and receiving LASCO customer code
number. No personal checks accepted. Dealers whose checks are
returned for non-sufficient funds will be placed on a CASH-ONLY
basis. Mastercard, VISA, Discover, American Express and PayPal.
PRICE CHANGES: Prices are subject to change without notice. Your
invoice will show the current net price and should be reviewed upon
receipt.
RETURNS: L.A. SLEEVE will not accept any returned goods without
prior authorization. No returns accepted after 30 days. Returned
merchandise must be accompanied by the following:
- A return authorization number (call for number).
Display number on outside of carton.
- A copy of original invoice.
- A letter of explanation.
Merchandise must be returned freight prepaid . Shortages and
discrepancies must be reported within ten days of invoice date.
Refused orders and/or unwarranted returns shall be subject to a 25%
restock handling charge, in addition to any incurred shipping charges.
Credit will not be given on merchandise returned without a written
explanation. Credit will be issued for returns that are accepted. No
returns are allowed on gaskets, carburetors, jets and
carb parts. No credit is given for returns that are not in original
condition , or if any parts of a kit are missing.
FOREIGN COUNTRIES: Foreign orders are shipped on a prepaid basis
unless prior arrangement is made with L.A. SLEEVE CO. Payment
must be sent in U.S. funds, Foreign checks and currency are not
accepted . Contact L.A. SLEEVE CO. by telephone or e-mail before
sending payment to confirm current prices and shipping charges.
CYLINDER SLEEVING, BIG BORE KITS: Please allow two (2) weeks
plus shipping time. All modifications are done to your cylinder
unless otherwise specified. When sending your cylinder and parts,
please remove all manifolds, studs, bolts, power valves, etc. We are
not responsible for any lost parts. Package your cylinder and head
upright in a sturdy box with plenty of paper and cardboard . Include
your piston if we are not supplying one. Always include instructions
inside the package, stating cylinder make, model and year, what work
you want done, and if you want L.A. SLEEVE to provide the piston
and a new gasket. Include your return address and phone number on
the instruction sheet. Dealers, include a business card.
WE WILL NOT BEGIN ANY WORK
WITHOUT WRITTEN INSTRUCTIONS.
LATE ORDERS: Dealers, please allow (ten) full working days before
calling to check on orders that have not arrived. Much time is wasted
looking up orders that have been shipped but that you have not
allowed enough time for transit. Please cooperate with us on this.
Do not use toll-free numbers when checking orders, call on (562)
945-7578. DO NOT CALL COLLECT. During peak seasons call
your orders in early to assure delivery when you need it. Ordering
Wednesday afternoon and requesting air shipping service will not
always get your goods to you for the race on Saturday or Sunday.
SHIPPING: We ship all orders U.P.S. whenever possible. Second day
air (Blue Label), next day air (Red Label), and 3-Day Select (Orange)
services are available in addition to regular ground service. Parcel
post and priority mail shipping is available also.
CHANGE OF ADDRESS: Please inform us of changes to your shipping or
mailing address, telephone and e-mail address. This will ensure that
you continue to receive good service from L.A. SLEEVE Co., and that
we can provide you with updated information and catalogs.
TERMS, CONDITIONS AND POLICIES
Los Angeles Sleeve Co. warrants this product will be
free from defects in material and workmanship for thirty (30) days
following date of original purchase. If the product is found by LOS
ANGELES SLEEVE CO. to be defective, such products will, at LOS
ANGELES SLEEVE CO.’s option , be replaced or repaired at cost
to LOS ANGELES SLEEVE CO. All products alleged by Purchaser
to be defective must be returned to LOS ANGELES SLEEVE CO.,
postage prepaid , within the thirty (30) days warranty period.
THIS LIMITED WARRANTY DOES NOT COVER LABOR
OR OTHER COSTS OR EXPENSES INCIDENTAL TO THE REPAIR
AND/OR REPLACEMENT OF PRODUCTS OR PARTS.
This limited warranty does not apply to any products which has been
subject to misuse, mishandling, misapplication, neglect (including but
not limited to improper maintenance) , accident, improper installation,
modification (including but not limited to use of unauthorized parts
or attachments), or adjustment or repair performed by anyone other
than LOS ANGELES SLEEVE CO.
The parties hereto expressly agree that the Purchaser’s
sole and exclusive remedy against LOS ANGELES SLEEVE CO. shall
be for the repair or replacement of the defective product as provided
in this limited warranty. This exclusive remedy shall not be deemed
to have failed of its essential purpose so long as LOS ANGELES
SLEEVE CO. is willing and able to repair or replace defective goods.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE NOT EXPRESSLY SET FORTH HEREIN. ANY
PRODUCT WHICH MAY BE SOLD BY LOS ANGELES SLEEVE
CO. BUT WHICH IS NOT MANUFACTURED BY LOS ANGELES
SLEEVE CO. IS NOTWARRANTEED BY LOS ANGELES SLEEVE
CO. BUT IS SOLD ONLY WITH THE WARRANTIES, IF ANY, OF
THE MANUFACTURERS THEREOF.
LOS ANGELES SLEEVE CO.’S LIABILITY (WHETHER
UNDER THE THEORIES OF BREACH OF CONTRACT OR
WARRANTY, NEGLIGENCE OR STRICT LIABILITY) FOR ITS
PRODUCTS SHALL BE LIMITED TO REPAIRING OR REPLACING
PARTS FOUND BY LOS ANGELES SLEEVE CO. TO BE
DEFECTIVE, OR AT LOS ANGELES SLEEVE CO.’S OPTION, TO
REFUND THE PURCHASE PRICE OF SUCH PRODUCT. IN NO
EVENT SHALL LOS ANGELES SLEEVE CO. BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
OR IN CONNECTION WITH THE PRODUCT. CONSEQUENTIAL
DAMAGES SHALL INCLUDE, WITHOUT LIMITATION , LOSS OF
USE, INCOME OR PROFIT, OR LOSSES SUSTAINED AS THE
RESULT OF INJURY (INCLUDING DEATH) TO ANY PERSON, OR
LOSS OF OR DAMAGE TO PROPERTY.
Any claim by Purchaser regarding this product shall be deemed
waived by the Purchaser unless submitted to LOS ANGELES
SLEEVE CO. within the earlier of (i) fifteen (15) days following the
date Purchaser discovered, or by reasonable inspection should have
discovered , any claimed breach of this limited warranty, or (ii) thirty
(30) days following the date of original purchase. Any cause of action
for breach of this limited warranty shall be brought within six months
from the date the alleged breach was discovered or should have
been discovered, whichever occurs first.
Some states do not allow limitations on how long an
implicit warranty lasts or the exclusion of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you. This limited warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
LOS ANGELES SLEEVE CO., INC. LIMITED WARRANTY
R
4-valve ....................begins @ $500.00
5-valve ....................begins @ $560.00
Twin...........................................................$185.00
Triple .........................................................$270.00
4
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 19
BUSINESS HOURS: 8:00 a.m. to 5:00 p.m. Monday through Thursday,
8:00 a.m. to 4:30 p.m. Friday. Closed weekends and holidays.
MINIMUM ORDERS: A $15.00 minimum applies to all orders.
PAYMENT: C.O.D., Credit/Debit on first order. Company check
accepted after first order and receiving LASCO customer code
number. No personal checks accepted. Dealers whose checks are
returned for non-sufficient funds will be placed on a CASH-ONLY
basis. Mastercard, VISA, Discover, American Express and PayPal.
PRICE CHANGES: Prices are subject to change without notice. Your
invoice will show the current net price and should be reviewed upon
receipt.
RETURNS: L.A. SLEEVE will not accept any returned goods without
prior authorization. No returns accepted after 30 days. Returned
merchandise must be accompanied by the following:
- A return authorization number (call for number).
Display number on outside of carton.
- A copy of original invoice.
- A letter of explanation.
Merchandise must be returned freight prepaid . Shortages and
discrepancies must be reported within ten days of invoice date.
Refused orders and/or unwarranted returns shall be subject to a 25%
restock handling charge, in addition to any incurred shipping charges.
Credit will not be given on merchandise returned without a written
explanation. Credit will be issued for returns that are accepted. No
returns are allowed on gaskets, carburetors, jets and
carb parts. No credit is given for returns that are not in original
condition , or if any parts of a kit are missing.
FOREIGN COUNTRIES: Foreign orders are shipped on a prepaid basis
unless prior arrangement is made with L.A. SLEEVE CO. Payment
must be sent in U.S. funds, Foreign checks and currency are not
accepted . Contact L.A. SLEEVE CO. by telephone or e-mail before
sending payment to confirm current prices and shipping charges.
CYLINDER SLEEVING, BIG BORE KITS: Please allow two (2) weeks
plus shipping time. All modifications are done to your cylinder
unless otherwise specified. When sending your cylinder and parts,
please remove all manifolds, studs, bolts, power valves, etc. We are
not responsible for any lost parts. Package your cylinder and head
upright in a sturdy box with plenty of paper and cardboard . Include
your piston if we are not supplying one. Always include instructions
inside the package, stating cylinder make, model and year, what work
you want done, and if you want L.A. SLEEVE to provide the piston
and a new gasket. Include your return address and phone number on
the instruction sheet. Dealers, include a business card.
WE WILL NOT BEGIN ANY WORK
WITHOUT WRITTEN INSTRUCTIONS.
LATE ORDERS: Dealers, please allow (ten) full working days before
calling to check on orders that have not arrived. Much time is wasted
looking up orders that have been shipped but that you have not
allowed enough time for transit. Please cooperate with us on this.
Do not use toll-free numbers when checking orders, call on (562)
945-7578. DO NOT CALL COLLECT. During peak seasons call
your orders in early to assure delivery when you need it. Ordering
Wednesday afternoon and requesting air shipping service will not
always get your goods to you for the race on Saturday or Sunday.
SHIPPING: We ship all orders U.P.S. whenever possible. Second day
air (Blue Label), next day air (Red Label), and 3-Day Select (Orange)
services are available in addition to regular ground service. Parcel
post and priority mail shipping is available also.
CHANGE OF ADDRESS: Please inform us of changes to your shipping or
mailing address, telephone and e-mail address. This will ensure that
you continue to receive good service from L.A. SLEEVE Co., and that
we can provide you with updated information and catalogs.
TERMS, CONDITIONS AND POLICIES
Los Angeles Sleeve Co. warrants this product will be
free from defects in material and workmanship for thirty (30) days
following date of original purchase. If the product is found by LOS
ANGELES SLEEVE CO. to be defective, such products will, at LOS
ANGELES SLEEVE CO.’s option , be replaced or repaired at cost
to LOS ANGELES SLEEVE CO. All products alleged by Purchaser
to be defective must be returned to LOS ANGELES SLEEVE CO.,
postage prepaid , within the thirty (30) days warranty period.
THIS LIMITED WARRANTY DOES NOT COVER LABOR
OR OTHER COSTS OR EXPENSES INCIDENTAL TO THE REPAIR
AND/OR REPLACEMENT OF PRODUCTS OR PARTS.
This limited warranty does not apply to any products which has been
subject to misuse, mishandling, misapplication, neglect (including but
not limited to improper maintenance) , accident, improper installation,
modification (including but not limited to use of unauthorized parts
or attachments), or adjustment or repair performed by anyone other
than LOS ANGELES SLEEVE CO.
The parties hereto expressly agree that the Purchaser’s
sole and exclusive remedy against LOS ANGELES SLEEVE CO. shall
be for the repair or replacement of the defective product as provided
in this limited warranty. This exclusive remedy shall not be deemed
to have failed of its essential purpose so long as LOS ANGELES
SLEEVE CO. is willing and able to repair or replace defective goods.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE NOT EXPRESSLY SET FORTH HEREIN. ANY
PRODUCT WHICH MAY BE SOLD BY LOS ANGELES SLEEVE
CO. BUT WHICH IS NOT MANUFACTURED BY LOS ANGELES
SLEEVE CO. IS NOTWARRANTEED BY LOS ANGELES SLEEVE
CO. BUT IS SOLD ONLY WITH THE WARRANTIES, IF ANY, OF
THE MANUFACTURERS THEREOF.
LOS ANGELES SLEEVE CO.’S LIABILITY (WHETHER
UNDER THE THEORIES OF BREACH OF CONTRACT OR
WARRANTY, NEGLIGENCE OR STRICT LIABILITY) FOR ITS
PRODUCTS SHALL BE LIMITED TO REPAIRING OR REPLACING
PARTS FOUND BY LOS ANGELES SLEEVE CO. TO BE
DEFECTIVE, OR AT LOS ANGELES SLEEVE CO.’S OPTION, TO
REFUND THE PURCHASE PRICE OF SUCH PRODUCT. IN NO
EVENT SHALL LOS ANGELES SLEEVE CO. BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
OR IN CONNECTION WITH THE PRODUCT. CONSEQUENTIAL
DAMAGES SHALL INCLUDE, WITHOUT LIMITATION , LOSS OF
USE, INCOME OR PROFIT, OR LOSSES SUSTAINED AS THE
RESULT OF INJURY (INCLUDING DEATH) TO ANY PERSON, OR
LOSS OF OR DAMAGE TO PROPERTY.
Any claim by Purchaser regarding this product shall be deemed
waived by the Purchaser unless submitted to LOS ANGELES
SLEEVE CO. within the earlier of (i) fifteen (15) days following the
date Purchaser discovered, or by reasonable inspection should have
discovered , any claimed breach of this limited warranty, or (ii) thirty
(30) days following the date of original purchase. Any cause of action
for breach of this limited warranty shall be brought within six months
from the date the alleged breach was discovered or should have
been discovered, whichever occurs first.
Some states do not allow limitations on how long an
implicit warranty lasts or the exclusion of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you. This limited warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
LOS ANGELES SLEEVE CO., INC. LIMITED WARRANTY
R
4-valve ....................begins @ $500.00
5-valve ....................begins @ $560.00
Twin...........................................................$185.00
Triple .........................................................$270.00
4
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:34 PM Page 19
L.A. SLEEVE CO., INC.
12051 Rivera Rd., Santa Fe Springs, CA 90670
800-822-6005 Fax: 562-698-7029
562-945-7578 e-mail: [email protected]
www.lasleeve.com
AUTOMOTIVE/PERFORMANCE
CATALOG
OFFROAD CATALOG STREETBIKE CATALOG ATV CATALOG WATERCRAFT CATALOG
REQUEST THESE CATALOGS
76668-LAS Motorcycle Catalog-Snowmobile qx8 v3_Snowcat 2012.qxp 12/16/15 5:36 PM Page 20
